Coil spring warning light on dash- car goes into limp mode- which means you keep pressing gas pedal but car goes nowhere, quick remedy- while driving- quickly turn off and turn on ignition( yes i done it on motorway doing 70mph) and then light will go off, just make sure you do not take key out because you gonna lock steering wheel and have accident. Get yourself obd scanning tool and if you get any lights on dash- scan your car and then you know what is wrong
Don’t suppose you could add the torque settings for each bolt could you. I Carnt find these anywhere. Or is tightening like a car wheel nut okay. Once nipped up give it a little more. If makes sense thanks great tutorial
Great Vid D,I have the same engine turbo has a lot of heavy white smoke coming out,i took that metal pipe off and it was completly blocked with hard sut,in process of cleaning everything,would this be the reason turbo is smoking?
Hi, innside the egr valve, its a plate that should move by an motor, can you normaly move this plate? My car will not start, when i disassembled the pipe shown in the video, it starts straigth up.
I used egr diesel cleaner from eurocarparts but looks like it needs more spraying than just little 250ml can, i just done it myself( without removing egr valve)
Master error P145F in 1.6 tdi engine appeared during dpf regeneration too high mass air flow during regeneration ... What can it be and how to fix it ..
Just done this to my car . I wouldn't have been able to do it without watching this video. Keep up the good work 👍
And now you have a check engine light?
Going to try this now on a 1.6tdi
How’d it go?
Thank you so much! I been quoted £800 to replace it! F##k that ill clean it myself now I know how 👍🏻👍🏻👊🏻
Thank you very comprehesive, job done :)
Hey David, interesting video.. thanks for sharing. I just wanted to know what symptoms to look out for before cleaning the valve?
Thanks
Coil spring warning light on dash- car goes into limp mode- which means you keep pressing gas pedal but car goes nowhere, quick remedy- while driving- quickly turn off and turn on ignition( yes i done it on motorway doing 70mph) and then light will go off, just make sure you do not take key out because you gonna lock steering wheel and have accident. Get yourself obd scanning tool and if you get any lights on dash- scan your car and then you know what is wrong
What about the egr cooler?
I need to block it too?
Anyone know where the egr is on a audi a3 8v 2.0 tdi.
Is there torque setttings for the bolts that you remove ?? When putting it back in
Hi quick question when you take out the bit that you say prize there a square cut out in side.when puting it back in does it face down or up.
Don’t suppose you could add the torque settings for each bolt could you. I Carnt find these anywhere. Or is tightening like a car wheel nut okay. Once nipped up give it a little more. If makes sense thanks great tutorial
Great Vid D,I have the same engine turbo has a lot of heavy white smoke coming out,i took that metal pipe off and it was completly blocked with hard sut,in process of cleaning everything,would this be the reason turbo is smoking?
If the pipe was clogged, then the valve will be worse.
The egr is the root of the cause.. that pipe is just the last part of the egr which is the return exhaust gas to the engine
Really helpful - thanks a lot!
Hi, innside the egr valve, its a plate that should move by an motor, can you normaly move this plate? My car will not start, when i disassembled the pipe shown in the video, it starts straigth up.
I would say it's totally clogged up. Take it off all together and clean it
Hi great vid, at what mileage would you say this needs doing,we’ve got 66k on our A1
philip jones mine’s gone at 62k and he said 60k for his so you’re probably going to need to do it soon
What year Audi is this mate
From 2009 to the end of the production of 1.6 tdi engines withing the VW group
Size of the bolts?
Which ones? Both ends where pipe is connected- use t30 bit
Going to try this now on a 1.6ths I
What cleaner did you use to clean it please. ?
Aerosol oven cleaner works really well on the carbon but you need to do it a few times if it is thick.
@@garyhoffmann1615 cool thank-you
I used egr diesel cleaner from eurocarparts but looks like it needs more spraying than just little 250ml can, i just done it myself( without removing egr valve)
you can also use diesel to clean it
Mine has 60k and was blocked up
david mellon mine has at 62k
Top man
Хорошо супер
63
Master error P145F in 1.6 tdi engine appeared during dpf regeneration too high mass air flow during regeneration ... What can it be and how to fix it ..