Assemble and Install Two Garage Door Openers - Gienie 750 - 7055 - Step By Step
HTML-код
- Опубликовано: 30 июн 2018
- How to assemble and install Garage Door Opener or How to Install Garage Door Opener - is a Do It Yourself using Gienie Stealth 750 = amzn.to/3layfTl and it shows the process of assembling and installation two new garage openers on two garage door with a finished ceilings .
Gienie 750 = amzn.to/3layfTl Or amzn.to/3lcx0Di
Genie GEN39026R Garage Door Opener Extension = amzn.to/3ip5wIB
www.amazon.com/gp/search/ref=...
Amazon Deals:
Try Amazon Prime 30 days for free = amzn.to/2JMWaLe
Create Amazon Business account = amzn.to/3mLSyYt
Joint Amazon Prime Watch Thousends Of Movies and TV = amzn.to/33NfsHD
Try Personal Shopper Wardrobe amzn.to/2VClfv9
This video is going to show you step by step through how to install
a belt drive garage opener and how to install the support brackets to joists in order to attach the power-head to the ceiling that ensure the new opener will not fall from the ceiling.
The Gienie StealthDrive 750 is an ultra-quiet garage door opener ideal for garages attached to living spaces. The StealthDrive 750 includes an integrated Battery Backup system for maximum safety and convenience.
This video also may apply to:
Genie Models 7055 2055 v6, LiftMaster, Chamberlain and Craftman. 
Хобби
Materials Used:
Gienie 750 = amzn.to/3layfTl Or amzn.to/3lcx0Di
Genie GEN39026R Garage Door Opener Extension = amzn.to/3ip5wIB
www.amazon.com/gp/search/ref=as_li_qf_sp_sr_tl?ie=UTF8&tag=josephkhalon-20&keywords=genie+750&index=aps&camp=1789&creative=9325&linkCode=ur2&linkId=406cc72e60c043303ab642a63d86a165
Amazon Deals:
Try Amazon Prime 30 days for free = amzn.to/2JMWaLe
Create Amazon Business account = amzn.to/3mLSyYt
Joint Amazon Prime Watch Thousends Of Movies and TV = amzn.to/33NfsHD
Try Personal Shopper Wardrobe amzn.to/2VClfv9
He does not mess around, he gets it done
Literally
This guy definitely doesn't get paid by the hour. Lol hell of a job!
Correct
Right on man. No fooling around man. I like that. Right on point. Great video friend.
Thank You
@@josephk9182 Great stuff. I have a Liftmaster chain I'm replacing with a Genie belt motor and the wiring is already installed within the house, can i just use the existing wiring to plug into the Genie lower eyes and the pad openers or do i need to use thier wiring? Ty
@@seatime674 No . Just use the previous wires if they good.
Excellent product!
I agree.
That's the fastest moving installer in history. I hope to be that fast one day.
This video only showed installation of two openers. Now, I have a 4 car garage - do you have a video about installing 4 openers, or should I just watch this video two times? Thanks!
Like your humor.
does it matter where the turnbuckles set on the rail , mine ended up near the sprocket
Where did you get the tool to cut the perforated angle and mounting straps. Is it expensive?
You can buy it on Amazon. It is not expensive I don't remember the price.
What do you do if garage door only goes down 4” from ground when using remote or wall button but goes down all the way when testing the distance ?
There is something wrong in your installation or the controller. Best call to technical support for your system to figure but went wrong.
Hi there, does the rail need to be leveled (e.g. horizontally with the floor) as I noticed there's a slight upward angle from the rear support to the garage door.
can you specify the time in the video you see a slight upward angle from the rear support to the garage door ? Thank you
@@josephk9182 Hi, I would say 23:57 - 24:03 would be the best scene. I guess my question is, do you normally level the rails before fastening it to the rear hangers?
@@davidguberman4780 Yes it should be slightly upward 2 to 3 inches or 15 degrees upward.
Was the fast installer guy not available?
Do I need to hook up the sensors in order to make the door come back down with the remote because it comes up but it doesn’t come back down
Yes you need to. Please follow the manufacture instruction.
Joseph K thanks 👍🏽
You forgot the carriage stop bo;t
is there any way to speed up the open and close it’s so slow
No that I know. The best you can ask the manufacture technical support to see if you can do it.
Hi I'm in the middle of trying to fix a garage door that is not square their for it's hard lifting it manually theirfor reason the motor fried any help with going about how to align the rails against the wall where wheels slide up n down because the ceiling and the ground aren't level so how do I go about lining that up and also do the rails have to be plumb ty
You need to level the rail vertically using level tool. Also make sure the garage door's springs are suite to the doors weight. You should reach technical support from the company that manufacture your garage system.
@@josephk9182 hi joe the motor is very old I threw it out today and bought a genie I did my best to straighten the door rail assembly I took it off practically and it seems better but the door is heavy wood without the tension cables it's really heavy I had to cut the old wires to fix the rails so the trouble I'm having now is how do I put them wires back it seems a lot of work to physically pull down on the wire to reach the bottom of door where the wire goes is their an easy way to hook the wire up ? The springs are heavy duty they are old but huge springs they run horizontally across the top ceiling along side of rail
is this Pedro from Napoleon Dynamite? sounds like it is.
If the Saf-T-Beams are not polarity sensitive, why worry about which wire to use? Just wire them in parallel
Also I was told that with the wall controller, it also is not polarity sensitive. And if it does not light up, merely switch the wires.
i have native wiring (Red, Green, White, Yellow) in the garage, I put 1. Red 2. Green 3. White 4. Yellow, how do I wire the safety sensors
You should call the manufacture regarding this issue.
@@josephk9182 I consulted the wiring diagram. Red and Green should be on both sensors. There may be two sets of wires on one side of the sensors. Both sets need to be connected the sensor for the current to pass to the sensor on the other side.
@@davidtucker3538 Yes this sound right.
I have a wiring issues.
What about the keyed garage door lock? When the door goes down, it locks, and only opens when you twist the manual lock. How is this solved?
Not in my garage door. When you installdoor openers you should not use manual lock or key.
@@josephk9182 thanks for the reply. So I should take it off? The garage door opener will keep it locked I guess.
@@coryprimo7641 Yes, that is correct.
@@josephk9182 thanks a bunch Joseph... 2 thumbs up!
@@josephk9182 thanks for the help. Got mine setup today.
How much the installer charged?
I believe $200
Please help
Low voltage Wire is white only...wtf
It seems to me the installer hates his job.
No way. The installer is not human is a robot.
L
Mr. your way of installing and dressing the wire just so bad. You don't detail how and which wire goes where. using staple to attach wires to the way can damage the wires.