Worcester Bosch Greenstar 8000 fitted after a full system conversion!
HTML-код
- Опубликовано: 8 фев 2025
- This is a full heating system conversion from open vented to a sealed system with the new Bosch 8000
Watch start to finish how I did it, and what i used!
#worcesterbosch #lifestyle #heatingsystem #plumbing
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
unbelievably good quality just like my work i love to see someone who takes pride in their work well done mate
Gavin.. thank you very much !
The quality of your pipe fitting is appropriate for this lovely boiler and shows the pride you take in your job. Many heating engineers don't make this effort when the pipes are on show in a kitchen so I can only imagine what a state they would leave an airing cupboard in!
Keep up the good work and I hope this helps to show that people do really notice a quality job.
Or how much a customer is willing to pay for a great gas boiler instal.
I'm a brand new subscriber from Bath, Maine, USA. I'm not a plumber but an old retired carpenter who takes a lot of pride in my work. I'd be pleased to have you work on my jobs.
I am amazed at the differences the way the boiler set-up is done between here and there. I'm actually looking at installing a Bosch Greenstar in my own house.
Quality workmanship. Whatever they’re paying you, it’s not enough.
That's awesome how the overflow pipe and condensate are both integrated. Been recently learning how a boiler works
Mate great work I would have it in my living room and just watch that all day
Lovely neat job - something to be really proud of. Respect ✊👍👏
Really Nice job so much better with brass clips . Great job nice to see some companies still take pride in their work
I'm going with late 80's for what you ripped out, as that was the later incarnation of the WM/BF looking at the case and gasvalve . I do recall them being heavy when struggling to hang on the wall over a kitchen worktop.......
The Hotrod or salamander microversion was used when a customer on a budget couldn't run to a new lagged indirect cylinder, I used to put a 22mm gate valve on the return and throttle it back, this gave a much better heat output to DHW.
The silver tube and compression fittings was used during a copper pipe shortage! There was a small estate of bungalows near us built at this time done with this stuff, in later years we had to do lots leaks there. This was due to the pipe rotting off as it went into the brass comp fitting, electrolysis IIRC.
Tidy job, nice to see a young plumber with a bit of pride in his work which sadly seems a rare occurrence in my area.
Nice tidy top job attention to details is awesome 👌
Excellent install, very tidy!!👏
I hope you are busy. What a great job.
Top work. If only everyone took as much pride in their work like you do. Keep up the good work.
Thank you so much !
Super smart job, very neat, organised, orderly.
Another great video pipe work neat and clean as usual the brass pipe clips far better than those plastic ones
Very professional job very tidy quality boiler as well.
So neat, looks great, well done.
great work .. well done x
Excellent fella, stay lucky, stay safe….
Great work Will, customer must have been well happy.
Great video and a great job well done, 👍
Thank you very much Terry !
Please more of these boiler installs. I’m close to passing my ACS and the thought of boiler installs is giving me stress but you make it look possible.
Nice install , credit to your workmanship.....👍
Great and neat work mate well done.
Cracking job that, love the 8000
Brilliant vid mate
Very nice job - wish we had booked you.
Very kind.. thank you !
Good work 👍🔥
Just started watching your videos, shit hot installation job mate, really neat 👍
Good job pal keep the good work up
Great video.. Very imformative and well edited
Very kind!
Great installation enjoyed watching this video.. very by informative
Nice job on that one mate, your pipework puts mine to shame. I would of liked to of seen how you lined up the flue in the loft though to exit out of that wall I'm assuming laser.
Great Installation and really enjoyed watching
Thanks a lot Paul !!
New time subscriber work looks quality mate
Amazing job.
why can I never get a professional like this a lot of service guys just want to do the quick job,,great installation nice and tidy ,I note you said you had a 40 minute drive to the job so I presume dublin Ireland would be off the cards
Excellent job my man!
Neat install and great video, fairplay mate 👍
Keep up the great work ✌🏽
Great work as always in your vids keep it up mate 👏
Beautiful
Just had our old 1996 installed Potterton heat only boiler replaced with a WB 8000 system boiler and pressurised system. Say what you want about how efficient these condensing boilers are but have to say the WB 8000 heat output is poor in comparison to our old Potterton.
Didnt have the Potterton serviced at all in the first 10 years and was never set at more than 4 in winter. Maximum setting was 6 on the dial. Had very hot water and you couldnt touch the rads when they were on. Despite the WB being set at 68 degrees, the 'hot' water is just warm and the rads, you can hold your hands on them for 30 seconds before it becomes uncomfortable.
Cost 3 grand installed by a WB approved installer. They did a good job but frankly, I wish id left the Potterton in until it gave up the ghost. Think I'll be lucky to get 25 years out of the WB and that's having it serviced every year as well.
Welcome to today’s UK
Quality job mate. One thing tho. I would have fitted the tundish at least 300mm above the T joint 👍
Very professional job! Just a few concerns the use of old dirty flow pipe and cleaning it out to use as Gas pipe, how do you do that and get water all out?
Secondly, PRV , the use of the Tundish teed into condensate….has the tundish had the return valve removed?
Чувак походу урвал большую партию данных котлов, теперь везде их монтирует)))
Ну теперь жильцы оценят качество проточной воды во всей красе.
Great work there fair play..
Another great job bro 👊🏽
nice install :)
I would be gobsmacked to find an old open vent system not dumping more debris than you showed. Possibly poor chemical ? Or relying on boiler pump and magnacleanse ? do you not think debris could be damaging suvh an expensive boiler ? A power flush or radiator removal would give you confirmation.
Great stuff buddy
Jobs great, but an 8000 necessary for the size of property? Looks quite small?
Sorry, on 10:02 you pan up to show a valve jig or something attached to the wall. Is this nessesary, or just something to make things neat? It's not the same as a stand off & it's also not a hagning plate (standard) . So why use one & is it worth it? Please let me know, thanks.
Great video
Top notch.
Quality, great job.
cracking job nice and neat
Quality job!
Great work. But I would choose the CDI over the 8000 any day far better build quality
Hi. What tundiah did you use to combine the prv and condensate please and did you discharge through to the bath waste?
Thought you weren’t allowed prv into 21.5?
Why do you never power flush wen fitting a new boiler.
Tidy job mate.
Nice touches with the brass clips and ply but puts more cost on the job and most people are looking at the prise so you could be pricing yourself out of work
Plate still at the back🤯
What consumer unit did they have 8000 life’s need red protection for ac and dc and most aren’t up to scratch yet
I’m looking at a similar job at my home what’ sort of price am I looking at
Neat 🎉
considering doing this, what would be the expected cost?
Excellent 👍👍👍🌹🌹
Lovely install, how come you didn’t go with a horizontal flue kit?
He did 🤷🏻♂️
Do Worcester recommend / insist on power flushing out like on their oil boilers ?
Lovely neat installation! nice to see people take pride in their work, nice straight pipework and pipe clips
but the boiler itself?? I wouldn’t fit a worshitter Bosch boiler again and I haven’t done in the last 15 years
I’m glad to see the back of them !
Thank you Salim ! Due to where im based the Bosch boiler does get picked, I think you’d like the new range ! Have you seen one ?
Looks really good, will you lag the pipes?
Hi jus a quick one could you explain what the conversion fittings/adaptor you used for the Prv pipe to the pvc pipe thanks
Hi buddy these boilers are really heavy think 40kg do you use the screw that come with pack or do you use your own if so what size screw thanks
What was the reason for moving to the airing cupboard and not keeping it in the garage? Cheers
Hi, garage was taken down and rebuilt in to a big kitchen
Thanks, almost identical job here, trying to decide whether to leave in same place or move to airing cupboard. Thanks for the video
Hi Will amazing job! Have you put the prv into a tundish then into the condensate drain?
Really nice work. What type of plastic is the condensate and the D2 pipe? I don't know of any 22mm plastic pipe suitable for a D2 pipe.
Nice work how long do you allow for this type of installation
3 days matey
I wonder if trolls are out der putting dislikes on other ppls work for no reason.
Didn’t know you were allowed to put discharge into the condense, was always taught to run seperwte
Where can you get a 12 year warranty? Can only find a 10 year warranty online...
Hi there ! If a Bosch accredited engineer installs it you can then get 12 years
Top draw 👍🏿
Nice installation but you did not show the flue complete route
What was that connected to the bottom of the blow off
Mc alpine tun dish
@@hartleyheatingandplumbing9801 great job by the way. Really neat and simple you have a new sub from me keep it up
See wb couldn’t be bothered rectifying the flow turbine adapter issue.
Nice installation but there's is one thing which isn't within regulations. Have a guess
What’s that ?
Your man's prob him a say not 300 below change of direction at Tundish.for company I work for it would need Id tape on gas,All pipes lagged and more clips on flue but that's all going a bit ott for a normal domestic install.yours is a good job
@@leecrawford8039 thank you mate !! Very kind 🙌🏻🙌🏻
tidy
Great job as always. If they need it servicing next year for warranty drop me a DM on Instagram of your too far away 👍🏻
Rcd*
0:26
virtual-girls-chat.online
sound name link at 4:20 and I sub :L
WB are crap boilers