I went out & bought a micrometer & it turns out all I really need was a bent piece of wire. The shaft turning the bit is bent. Thank you for sharing. Have a blessed day.
why is it a mess in every workshop there. You first clean up the mess before you start a new job, otherwise you will never be able to work properly. And they have never heard of a decent floor, sand, chunks of concrete, chips everywhere. This has nothing to do with poverty, more with mentality. Apparently if you don't know any better then it must be normal.
That's the fucking culture they grow up in mate, you take one of them Pakistani kids and educate them in the US and he becomes a software engineer, you leave him home, he becomes a flip-flop machinist on a dirt floor. Upbringing is everything.
I worked in a shop like that,more than 50 years ago (foundry included), in Bangladesh-hobbled a lot of gears . I am still impressed with what they turned out considering what they had to work with super impressed by the quality of welding(I see they are still a little harsh on lathe ways!
Yip this what it was like years ago in factories and yards in Britain. Im not condoning it but i would.like to see some of yous working in that heat with your last line of defense PPE wear.
POR FAVOR MENOS CRITICA Y VALOREN EL TRABAJO..ESTOS OPERARIO RECIBEN ORDENES DE SUS JEFES Y SE ACATAN A LO QUE HAY .....ANIMO SEÑORES OPERARIOS .....DESDE ESPAÑA ISLAS CANARIAS...SALUD Y SUERTE PARA TODOS..ABRAZOS.....
I'm wondering how many kilograms of metal chips are around the shop. Would be interesting to see a measurement. Great video also! Edit: also good thing OSHA doesn't see this video...
You'd think with so many people in the country and really low wages you would have at least one person to keep the shop clean. When was the last time someone swept the floor, was it even in this century?
Их выверка, это сказка. Кривым индикатором. Немудрено, что шпоночный паз прострогали сикось-накось. Ну или дед на радиально-сверлильном входные отверстия не в оси сделал - меньшее из бед. Про крест с торца вообще непонятно, как делили. Стружку от станка наверное только по праздникам убирают 7:17.
ES el inicio así como otros países hicieron la revolución industrial. Comenzaron con lo que tenían y luego poco a poco se fueron rectificando y equipado. No hay que olvidar que esto es barato y solucionan el problema. NO pagan ingeniero ni pagan jefe fundidor ni toda la pirámide de una empresa.
These guys are great at getting the job done with whatever machine tool is available. One would think that some simple measuring devices would go a long way to quality improvement. Just think what these guys could do with some modern equipment with DRO's. Too bad, their work environment is an absolute disaster. Clean the area and quality would improve.
Great, but you should make a floor there so you don't have to store those tools in the sand (or at least put something on the ground there). It can cause big problems...
Вряд ли хорошо. Я подозреваю, что в подобное место обращаются больше от безысходности, когда наличие хоть какого-то кривого-косого вала лучше, чем его отсутствие.
QUE luego se hace cara y no competitiva AUNQUE si tengan producto de mejor cálida. NO OLVIDAR así comenzó china. He inundó el mercado con cosas baratas y adiós industrias americanas alemanas inglesas.
They say that “you are a product of your environment”……why would anybody post a video of this dumpster fire of a shop?? Chips piled everywhere, dirt floors, not a single work bench…This is the most archaic work environment I’ve ever seen! This guy must get paid by the day because he’s milking that speed
Not really incredible, is it? This is a simple engineering process which is performed every day all over the world. The working conditions in that factory are horrendous and I suspect quality standards aren’t much better either.
Very old machinery, obsolete, filthy dirty work environment, what sort of tolerance are they working to. No oil for the cutting tools, no precision measuring devices. Looks like a really loose fit into that gear. That will work for a week or so. What crap. This is the best advertising for what not to purchase from this so called machine shop. The literally beat this thing in place despite the loose fit. How crude can you get?? 1 hour to machine a piece like that...? It is a wastde effort. It has failure machined into it.
Absolutely shocking, I work in a machine shop turning parts for civil nuclear, oil and gas and military . Looks like monkey metal to me and there's nothing special about very basic machining.
6:56 right there you are doing it wrong!!!you are very smart but NO,NO,NO, about your sandals a good pair of shoes will protect you!!!!!🔴🫢🤫think safe not sorry!!!🤫
Boy, that entire shop inspires trust in quality and part longevity.
Да ребята, долго вам ещё до цивилизации...
😁😁😁
А нас что станки лучше что ли , либо советское либо иностранное новое
@@antonantonov2879 культура производства, как в древнем египте)))
I went out & bought a micrometer & it turns out all I really need was a bent piece of wire. The shaft turning the bit is bent. Thank you for sharing. Have a blessed day.
It's always great. Your video is excellent quality. We liked and enjoyed to the end. Thanks
why is it a mess in every workshop there.
You first clean up the mess before you start a new job, otherwise you will never be able to work properly.
And they have never heard of a decent floor, sand, chunks of concrete, chips everywhere.
This has nothing to do with poverty, more with mentality.
Apparently if you don't know any better then it must be normal.
полностью поддерживаю.
That's the fucking culture they grow up in mate, you take one of them Pakistani kids and educate them in the US and he becomes a software engineer, you leave him home, he becomes a flip-flop machinist on a dirt floor. Upbringing is everything.
I worked in a shop like that,more than 50 years ago (foundry included), in Bangladesh-hobbled a lot of gears . I am still impressed with what they turned out considering what they had to work with super impressed by the quality of welding(I see they are still a little harsh on lathe ways!
I have watched a number of these videos and find them of interest. One point I find even more interesting is that they seem not to be cutting fluids?
OH how I love working big!
Great job. Lathe operator did especially good work.
Your videos fascinate me, they are very interesting and you work well, congratulations
Nothing like bastardinium alloy 🤗
Gute Arbeit weiter so 😉
Glad you liked it
why is there such dirt all around, workers without overalls, no technical safety rules
Looks like a shop from USA 75yrs ago old shapers and turret lathes.Funny thing the stuff is still running good.
Ist das die
Maschinenbauschule Mombai?
And here you need a hydraulic press for the shaft. Hard work😊
I love their "indicator"
Yip this what it was like years ago in factories and yards in Britain. Im not condoning it but i would.like to see some of yous working in that heat with your last line of defense PPE wear.
What is the location of this workshop???
Excelente exemplo de trabalhadores e metalúrgicos
Na ausência dos EPIs, contam apenas com a proteção divina
👍👍
Mi sono iscritto perché ho visto che sapete il fatto vostro
Sin gafas de de seguridad para afilar la cuchilla del torno…
الله يساعدكم
POR FAVOR MENOS CRITICA Y VALOREN EL TRABAJO..ESTOS OPERARIO RECIBEN ORDENES DE SUS JEFES Y SE ACATAN A LO QUE HAY .....ANIMO SEÑORES OPERARIOS .....DESDE ESPAÑA ISLAS CANARIAS...SALUD Y SUERTE PARA TODOS..ABRAZOS.....
I'm wondering how many kilograms of metal chips are around the shop. Would be interesting to see a measurement. Great video also!
Edit: also good thing OSHA doesn't see this video...
Why would OSHA care the shop is obviously not in the U.S.
Incredible
An Primitivität nicht zu übertreffen. Diese Welle hat Schrottwert.
خیلی خیلی حرفه ای .ولی با دنپایی🤔
Looks like it's filmed in Bradford UK.
Havent you people learned your lesson after starting 2 ww's?
@@karupt422 I never started any ww's but maybe i should?
They are drilled two not symmetrical holes.
Amazing
In America, I wouldn't be cutting without Oil or some type of Lub!
You'd think with so many people in the country and really low wages you would have at least one person to keep the shop clean. When was the last time someone swept the floor, was it even in this century?
Gosto muito de ver esses trabalha
Maşallah.
Những ban tay vàng
Those are used, repurposed ship's propeller shafts from Gadani Beach ship breaking yard.
Enjoy the coffee with your breakfast😂
Работяги…
que país é esse🎶🎼🎵
Os cara e muito inteligente
Вот бы таких ребят на отдых а Тайланд
9:17 yes, it's best practice to throw a chain over freshly machined parts.
The pointy rod is a great way to tell if the part is running true. 😢😢😢😢😢
Similar to the sticky pin method, you would be surprised how accurately you can set up and approximate.
Most interesting. I did not know their religion prohibits the use of any machining lubricant.
😄 😁
M A N - Werkstatt mach erfolgter Integration durch Indischer und Pakistanischer Facharbeiter !
26:10 excellent quality control, LOL Why don't they just get bench press or hydraulic press.
قال تعال إن انزلنا الحديد وفيه باس شديد ومنافع للناس
dang those bits are screaming for some cutting oil
😆 😅 😂
Shake hands with danger...
for them its like brushing teeth in the morning
Их выверка, это сказка. Кривым индикатором. Немудрено, что шпоночный паз прострогали сикось-накось. Ну или дед на радиально-сверлильном входные отверстия не в оси сделал - меньшее из бед. Про крест с торца вообще непонятно, как делили. Стружку от станка наверное только по праздникам убирают 7:17.
😂
One century back...
😁🥳
ES el inicio así como otros países hicieron la revolución industrial. Comenzaron con lo que tenían y luego poco a poco se fueron rectificando y equipado. No hay que olvidar que esto es barato y solucionan el problema. NO pagan ingeniero ni pagan jefe fundidor ni toda la pirámide de una empresa.
Mesin sangat kuno , masih bagus pekerjaanku dan juga masih lebih besar aku bikin barang , aku pegang mesin panjang 24m diameter 2,5m Jerman,
These guys are great at getting the job done with whatever machine tool is available. One would think that some simple measuring devices would go a long way to quality improvement. Just think what these guys could do with some modern equipment with DRO's. Too bad, their work environment is an absolute disaster. Clean the area and quality would improve.
This is an insult for the real machinists… wtf is this jungle.
Great, but you should make a floor there so you don't have to store
those tools in the sand (or at least put something on the ground there).
It can cause big problems...
i will deliver your message to them, it would be better if they do it
1:50 Worksafe would have a field day with all those machine and unsafe area, NO wonder, so many people get hurt and died, n India.
Нагреть зубчатые колеса перед посадкой на вал видно не судьба, но вал делают с допуском именно на горячую посадку. И бардак как всегда везде.
Я не уверен, что они подозревают о существовании допусков.
...slippers !!!????????????????????????????????????
Hotel California
Verry unsafe practice... No PPE's.
Эти ребята, сумасшедшие! Как потом все это после такой помойки работает?
Вряд ли хорошо. Я подозреваю, что в подобное место обращаются больше от безысходности, когда наличие хоть какого-то кривого-косого вала лучше, чем его отсутствие.
Man was sharpening his tool on a grinder and did not use safety glasses. Thats bad. He will get stuff in his eyes.
Thats his smallest problem
for him, its like brushing teeth in the morning
@@hydraulichands also was unbekanntes
Obviously you are not familiar with the "safety squint". Its all there was before ppe.
QUE luego se hace cara y no competitiva AUNQUE si tengan producto de mejor cálida. NO OLVIDAR así comenzó china. He inundó el mercado con cosas baratas y adiós industrias americanas alemanas inglesas.
Why dont you clean your shop?
😂😂😂😂😂😂😂😂
They say that “you are a product of your environment”……why would anybody post a video of this dumpster fire of a shop?? Chips piled everywhere, dirt floors, not a single work bench…This is the most archaic work environment I’ve ever seen!
This guy must get paid by the day because he’s milking that speed
You said it yourself. You are the product of your environment.
mpaling gears on non-hot metal fire super workers of shit and sticks..
Not really incredible, is it? This is a simple engineering process which is performed every day all over the world. The working conditions in that factory are horrendous and I suspect quality standards aren’t much better either.
02:30 Just about knocked silly .
Very old machinery, obsolete, filthy dirty work environment, what sort of tolerance are they working to. No oil for the cutting tools, no precision measuring devices. Looks like a really loose fit into that gear. That will work for a week or so. What crap. This is the best advertising for what not to purchase from this so called machine shop. The literally beat this thing in place despite the loose fit. How crude can you get?? 1 hour to machine a piece like that...? It is a wastde effort. It has failure machined into it.
Absolutely shocking, I work in a machine shop turning parts for civil nuclear, oil and gas and military . Looks like monkey metal to me and there's nothing special about very basic machining.
С чего вал , Братья ?
С карманных часов!
@@дядяТоляНичей тогда маловат
ARE THESE CLOWNS ALLERGIC TO BOOTS? DO THEY EVEN SELL THEM IN INDIA?
It's PAKISTAN
NOT INDIA.
INDIA is far more developed country.
@@ramchandrajoshi4945 They can't drive for sh1t..
India is a very hot country. Boots in the 50 degree heat would be a health hazard of their own.
@@julianpetkov8320 So is Australia but at least our feet are safe. It's just asking for trouble otherwise.
6:56 right there you are doing it wrong!!!you are very smart but NO,NO,NO, about your sandals a good pair of shoes will protect you!!!!!🔴🫢🤫think safe not sorry!!!🤫