I'm happy to see that Uncle Rob is feeling a lot better! He actually looks good. he looks like he lost a few pounds. He seems like a nice fella, the world needs as many nice people as possible, especially these days! This is my favorite Channel, all you guys and gals are great! Be safe and God bless!
The more I see Rob the more I understand he is just an ornery as Billy and Tommy. I love these video's, OMG, SRC, GEN 2. All of it is good and no BS drama. Glad to see K MF Powers back in the shop.
Bill, "ima blast him" hahaha love it. That's the spirit!! Great content sir!!! And uncle bucko is so damn funny. I laughed my ass off!!! Lack of maintenance....
Nice to see the 9" going in the Malibu! Looking forward to seeing what you'll be able to run now that you can spray it out of the hole! Thanks for all the great content!
You're gonna love Isky camshafts. I'm on my 3rd 1, couple hydraulics and my current solid lifter flat tappet! The current camshaft had 15 seasons on it! Love the content, it's normal in a completely messed up world!!
So I was working in the shop yesterday and doing maintenance and repairs. All I could hear was uncle bucko’s voice. I was laughing to myself and the guy that I was working with asked me why I was laughing.
That 9" is sure nice and I`m pretty sure you won`t be able to break it with the small block. Now you can really get down to serious bracket racing with all the tricks available. Good luck this weekend Bill.
CPP for the power steering kit. Also plan on caster change control arms to make the wheel return to center correctly. It will take about 6 degrees of caster change to make it drive. Black ‘55 is the subject. First hand thru a ‘56 hardtop restored job. I can also give extremely good driveshaft advice for the pretty Malibu. Not like I’ve had my hands on that for over 30 years…..
And they say FOUND ON ROAD DEAD. But you have to put FORD parts in a Chevy to keep em on the road. BAHAHAHAHAHA!🤣🤣🤣🤣🤣🤣🤣. Just had to poke a little fun and do Ford guy things. Great video. Thanks from us midshifters Mr. Bill.
On the power steering for the 55. I did a rack and pinion for a 57 Chevy. It used a Camaro ps pump and a Buick LeSabre rack. It was a bolt in kit that worked really well. It used the long water pump. I can't remember the name of the company because that was years ago. Just needed to drill out some frame rivets and replace them with bolts. I do remember that I did it in one day without pulling the motor.
On that Isky cam... the Model: 201555 was a GREAT fun cam we toyed with .. like '69 - '71 .. In any cube size from 302 to 350.. And still is on the shelf.. Needs roller rockers, rev kit, gear drive and timing.. Flow benched 202 dbl-hump heads ..Monster springs and so on 😉
So glad to see the new rear in the Malibu, hopefully it will give you the numbers you seek. Now you can give it the full beans off the hit! Outfreakingstanding! Uncle Bucko does some nice work, but why is he so crabby always trying to bust Mark`s balls? Great content, my son would have loved this channel like I do. Happy Heavenly Birthday Mark, I miss you dearly💔. It`s been 3 years since he was brutally taken from us, he would have been 29 today. That pain will never leave me, but it`s good to know his killer is on Death Row in Florida. Stay safe all, God Bless.
We put a Moser9" in my Gbody ElCo w/Detroit Locker...perfect!The customer service was great ordered it on a Monday morning and had it here in Florida on Thursday afternoon
BILL The Malibu looks great 👍 with The Moser 9 inch Rear in it. That’s gonna change things 😉. Bill I think you need a Head and Neck restraint like A HANS CLONE that will fit into the seat 💺where the headrest Bars go into the seat 💺! If you can find someone that makes one. Or think about this Bill: U could buy an old or new replacement head rest seat insert rods and fabricate a Head and Neck restraint that will fit into the seat where the headrest goes. That way you can pop it in while ur racing and put your head rest back in when ur not racing. This way you don’t have to do any messing up the original interior of the car. Just a idea 💡 🤷🏻♂️
Man been awhile since we seen Kenny or his camero since y’all been racing with your kids again, hope the camero makes an appearance soon glad to see Kenny still killing it behind the scenes and y’all been killing it with the content and racing you’ll get these cars sorted I’d bet on it lol
Glad to see you got the 9 inch in and can spray the car off the line and can’t wait to see the motor put together for the 55 and hear it run and that’s awesome that you and billy are going to work on the big block together
Y’all are awesome always pushing ahead keep the great vids and work. Maybe the OG Nova out back will get a garage spot this winter for a resurrection. It deserves it.
Glad to see Bill in all this madness going on right now that you still find time to keep us up to date on everything going on. I will definitely take the Malibu for the win over the truck in your future grudge race.
We are getting ready to do a 9” Swap/upgrade drum to disc brakes in our 69’ Nova as well. Ready to have that done and motor rebuilt so we can get back to racing. Thanks for the content Bill. Wish we had some of y’all’s rain down south. Been brutal heat. 108 avg everyday! Sick of it
All get news, Been wondering where Kenny has been, Thanks for letting us no ! Glad you got the rear end in the Malibu! Also glad Uncle Buckel is getting all settled!
I never thought about how much Mrs Vicki adds to the videos but when she's not in there with her details or giving Bill a hard time or worrying about the boys I really do miss her. Still love all the videos regardless but just something I noticed
Hell yeah Old Man’s Garage for the Win!!! Your voiceovers are awesome I think you should do the Majority of the voiceovers on the Main Channel also you do a very good job at them
Commenting From ‘Marion Ohio’ I miss MCIR being open to the public and seeing you guys run some Badass little hot rods out there I grew up at that Track. That Malibu is a sweet little ride and a 9” Rear End is gonna be a solid Unit for it that’s for certain. I hope you enjoy it for many years to come.
With that new rear end you should be a high 9 in the quarter. Looks great. God bless uncle Terry. Hope he gets caught up. He should hire someone to help him get caught up.
Definitely good to see all the normal faces and voices back around the shop again , if one of them is missing you notice pretty quickly. It’s great to see that new rear end going up in the Malibu she looks like a great fit in there. As always looking forward to what is next , keep us in the know and stay safe.
Absolutely 💯 12 bolt will do the trick now to keep everything else together, totally dig you videos and the family for your time and effort to help everyone out with your talents You have always made your audience aware of what is happening Thanx Bill for allowing me into your life and shop, this all started with SRC BILLY DA KID good and bad You and Mrs Vicky are Genuine about the facts and Family, PEACE OUT HAVE A GREAT DAY 👍😀
Hi Bill, love what you and the family do with the videos. I have a ‘55 210 that had a 605 steering box conversion done, and to be honest, I don’t like it. You have to steer it constantly, like the tow in is screwy or the box is loose, and I have heard others having the same problem. From what I have been able to research, the CPP 500 steering box conversion doesn’t have this problem. I was going to convert mine to that set up, but have decided to go with a rack and pinion set up instead, for the weight savings. You might look into the CPP set up for your folks’ car.
Did you add caster when you had it aligned. Don't assume the alignment tech did this for you. Most don't know the difference and will use what ever they find for a spec. To need 2-1/2-3-1/2 degrees of caster with the conversion or it will wander like crazy.
Nice rear-end! Now you can test the limit of all the other part's involved! Lol For real though, that is a nice daily driver, I'm loving the progression and explanations along the way! Thanks for sharing
55 chevy....use a cold case radiator in the 6cyl position in front of the core support...this gives you all the room you need to do whatever....LOVE YOU GUYS
I’m building a small block for my g body Monte Carlo ss as well.. like how you guys are into radio control!! I been into rc cars since I could remember.!? Got a trx4 e revo brushless and a nitro. Looking at them drag cars lately.. keep the videos coming please and thank you!!👍👍👍
I really wish you’d cover up that unfaced fiberglass insulation it’s making me itchy looking at you breathing it in LOL!! Love love love your channel!!
I was hoping to see y'all down here at Twin River Raceway this weekend. But with all this rain we have had there is some major flooding going on in eastern Kentucky and southwest Virginia. Hope to see y'all down here eventually.
My favorite videos with my morning coffee! Bill I commented on your last video that I am gathering all my stuff up for my Traxxas t Maxx 3.3 truck that has about every piece of Integey aluminum parts made for it it's color scheme is is polished aluminum and red Integey red shocks, it only has about 6 hour's off run time and it is just a shelf king, I'm going to send it to you soon as me and the wife get everything together, I even have the original box
She’s probably already got at minimum the same rear already in it but since the cars already been built some, it may have been upgraded to a ten or twelve bolt so Bills spare would be going backwards for her. But who knows what the hot rod gods will have planned for the thing so put it out back in the stables for future use in something
I'm sitting here watching you and it's amazing how comfortable you have gotten making these videos that content just keeps getting better and better so is the Malibu it's looking amazing
Thanks for the update. I had to watch some of your older stuff. you tube was getting boring. Been watching the channel for along time. I'd like to grab one of the SRC plates. Glad to see you all testing again.
Well you have a lot in the frying pan there . It's good things are going well and your able to get parts found. It sounds like made be you could have sometime to relax if you want. Bill always great to see things going well . Have a great day 🖐
I’m getting ready to install the nitrous outlet kit on my 98 Camaro. Because of you guys I’m finally closer to getting into racing. Cam, springs and header swap done and now to install my 9” Qp rear end and nitrous controller. Can’t wait to get out to a few races soon. Thanks for the motivation guys!
Bill I was one of the guys asking about why uncle Bob did not build the motor. Totally slipped my mind about him having covid. Can relate to that as I got that Wuhan Virus in the second week of December 2019. All the doctors thought I was nuts until the serology test results came in.
It’s no secret that Jr and I haven’t had the best relationship the past few years. It’s been difficult to watch some of the things that have transpired. I think for a while both boys considered me toxic in that there was no way dad could be right about so many things that can go wrong. “Dad hates everyone” but the fact is we were getting over run by situations that could ultimately lead to disaster, both financially and physically. We aren’t out of the woods yet. But I can see the boys growing wiser every day.
Bout time! Got one in my 98 Formula T/A and won't sell it for less than the full price of a new Moser installed in it. Those 9" rears are soooo Quiet! Built for trucks but no more truck sound LoL. 427lsx Florida car with air. Race weight 3600 with me[225]in it.
I'm happy to see that Uncle Rob is feeling a lot better! He actually looks good. he looks like he lost a few pounds. He seems like a nice fella, the world needs as many nice people as possible, especially these days! This is my favorite Channel, all you guys and gals are great! Be safe and God bless!
Bill I can’t thank you and your family enough for entertaining all of us and you are a role model for a lot of people.
Thanks for all the encouragement you have given me to get back to my roots and back into my garage. Respect from Kelowna BC Canada.
K town. Chit show .
The more I see Rob the more I understand he is just an ornery as Billy and Tommy. I love these video's, OMG, SRC, GEN 2. All of it is good and no BS drama. Glad to see K MF Powers back in the shop.
Bill, "ima blast him" hahaha love it. That's the spirit!! Great content sir!!! And uncle bucko is so damn funny. I laughed my ass off!!! Lack of maintenance....
Vintage A/C is the way to go and it starts with their total location layout plan for everything you described you will be installing.
Coffee and old mans garage! Great morning.
Nice to see the 9" going in the Malibu! Looking forward to seeing what you'll be able to run now that you can spray it out of the hole! Thanks for all the great content!
Bill I think you should do a calender like the firemen do but for racing in you overalls ha ha ha!
You're gonna love Isky camshafts. I'm on my 3rd 1, couple hydraulics and my current solid lifter flat tappet! The current camshaft had 15 seasons on it! Love the content, it's normal in a completely messed up world!!
Wow 15 seasons on isky cam ? Awesome. I'm get.an isky heavy lumpy cam for my BBF. Isky are great. I just like the look of the stickers and name
So I was working in the shop yesterday and doing maintenance and repairs. All I could hear was uncle bucko’s voice. I was laughing to myself and the guy that I was working with asked me why I was laughing.
Now you can give the Malibu ALL the beans.
Poor Chumpy and his sore nuts.
Lacka MainnnTenance haha bucko is a trip 😂 and at this point it be easier for Mark to give you your own 🔑
Bill uve come full circle. Retiered dirt worker,full time race team- u tuber.well done sir.we cant get enough.
There is a 9" yoke that is about an inch longer so you don't have to lengthen the shaft. I've used it in several swaps.
Yes the yolk will save alot of extra work and simple works best
That 9" is sure nice and I`m pretty sure you won`t be able to break it with the small block. Now you can really get down to serious bracket racing with all the tricks available. Good luck this weekend Bill.
Good luck on Billy's Nova and on getting your Dad's 55 right so they can cruise it some!!
My trick chassis 9" Ford in my Cutlass works great. I used 3:70 rear gear.
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣Uncle Bucko wearin' those sandles with socks under them women's bell bottom jeans had me absolutely dying. 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
CPP for the power steering kit. Also plan on caster change control arms to make the wheel return to center correctly. It will take about 6 degrees of caster change to make it drive. Black ‘55 is the subject.
First hand thru a ‘56 hardtop restored job.
I can also give extremely good driveshaft advice for the pretty Malibu. Not like I’ve had my hands on that for over 30 years…..
And they say FOUND ON ROAD DEAD. But you have to put FORD parts in a Chevy to keep em on the road. BAHAHAHAHAHA!🤣🤣🤣🤣🤣🤣🤣. Just had to poke a little fun and do Ford guy things. Great video. Thanks from us midshifters Mr. Bill.
Just Ford designed.
@@donhorner6019 still by Ford. You said it. Chevy can't design rear ends and Dodge can't find a transmission that works
Good luck with the new rear end Big Bill and thanks makeing me smile.
I almost choked on my ice water ,when Jeremy was driving the delivery van....lol
Worse part was that was the second vehicle to go down that week! Luckily UB didn't catch me working on that one double lack of maintenance. Chump
It's nice to see everyone is doing well for the most part
On the power steering for the 55. I did a rack and pinion for a 57 Chevy. It used a Camaro ps pump and a Buick LeSabre rack. It was a bolt in kit that worked really well. It used the long water pump. I can't remember the name of the company because that was years ago. Just needed to drill out some frame rivets and replace them with bolts. I do remember that I did it in one day without pulling the motor.
Good morning Bill! What up Kenny powers!
How is uncle Rob doing with his health. It's good to see him helping again. Very smart guy. Glad 9in is in the G. Body
On that Isky cam... the Model: 201555 was a GREAT fun cam we toyed with .. like '69 - '71 .. In any cube size from 302 to 350.. And still is on the shelf.. Needs roller rockers, rev kit, gear drive and timing.. Flow benched 202 dbl-hump heads ..Monster springs and so on 😉
Yeah, get the 55 finished so Mom and Dad can enjoy it before they're gone. Lord knows they deserve it!
So glad to see the new rear in the Malibu, hopefully it will give you the numbers you seek. Now you can give it the full beans off the hit! Outfreakingstanding! Uncle Bucko does some nice work, but why is he so crabby always trying to bust Mark`s balls? Great content, my son would have loved this channel like I do. Happy Heavenly Birthday Mark, I miss you dearly💔. It`s been 3 years since he was brutally taken from us, he would have been 29 today. That pain will never leave me, but it`s good to know his killer is on Death Row in Florida. Stay safe all, God Bless.
We put a Moser9" in my Gbody ElCo w/Detroit Locker...perfect!The customer service was great ordered it on a Monday morning and had it here in Florida on Thursday afternoon
BILL The Malibu looks great 👍 with The Moser 9 inch Rear in it. That’s gonna change things 😉.
Bill I think you need a Head and Neck restraint like A HANS CLONE that will fit into the seat 💺where the headrest Bars go into the seat 💺! If you can find someone that makes one. Or think about this Bill: U could buy an old or new replacement head rest seat insert rods and fabricate a Head and Neck restraint that will fit into the seat where the headrest goes. That way you can pop it in while ur racing and put your head rest back in when ur not racing.
This way you don’t have to do any messing up the original interior of the car. Just a idea 💡 🤷🏻♂️
Man been awhile since we seen Kenny or his camero since y’all been racing with your kids again, hope the camero makes an appearance soon glad to see Kenny still killing it behind the scenes and y’all been killing it with the content and racing you’ll get these cars sorted I’d bet on it lol
Go KENNY!!!!
Glad to see you got the 9 inch in and can spray the car off the line and can’t wait to see the motor put together for the 55 and hear it run and that’s awesome that you and billy are going to work on the big block together
Bill us 3rd shifters are super stoked in the break room loving this on the big screen 🤠👍🏽thanks man we love ya😉💪🏽
Racemaster Rob, glad to see him back well
Y’all are awesome always pushing ahead keep the great vids and work. Maybe the OG Nova out back will get a garage spot this winter for a resurrection. It deserves it.
Glad to see Bill in all this madness going on right now that you still find time to keep us up to date on everything going on. I will definitely take the Malibu for the win over the truck in your future grudge race.
Yes Malibu for the win 🏁🏁🏁🏁
Billy needs to get that box performance sticker of the nova! Asap!
You got some good people around you there mr. Bill., wish there was a little more action up here in New England.,
I watch the old man every time I can on the way to work. Great show all around guys!!
I love it, they circled Chumpy's problem 😂😂
You guys have to make a Uncle Bucko
Lack of maintenance shirt.
Good to see Rob back at it.
Nothing like a new video from the old man at 4AM before you start work! 🤣
Same here! 3rd shift Duracell.
I know I love it. sit on the pot and watch the ol' man...start my day off right
We are getting ready to do a 9”
Swap/upgrade drum to disc brakes in our 69’ Nova as well. Ready to have that done and motor rebuilt so we can get back to racing. Thanks for the content Bill. Wish we had some of y’all’s rain down south. Been brutal heat. 108 avg everyday! Sick of it
Bill you are a true definition of a real family man, you rock ol man
Thanks Bill and all src gang for what you do for the sport I wish you all the best God bless and as always be safe 👍
Nice to see the new rear in the Malibu...can't wait to see the difference it makes at the track..!!!
All get news, Been wondering where Kenny has been, Thanks for letting us no ! Glad you got the rear end in the Malibu! Also glad Uncle Buckel is getting all settled!
"My '55 doesn't run because I'm waiting on a cam from Isky."
Tale as old as time. 👌😂
My 55 dont run cause I parted the damn thing out........dats why!
Another great video! Bill you are masterful telling a story.
Can’t wait to see the Malibu race again with that new rear end
I never thought about how much Mrs Vicki adds to the videos but when she's not in there with her details or giving Bill a hard time or worrying about the boys I really do miss her. Still love all the videos regardless but just something I noticed
Been waiting for this video for months! Glad you went with a 9”. Don’t cheap out get a good 1000hp driveshaft.
Nice 👌 want to see Malibu in action some time soon 😀 my best wishes for all of you and keep the good work 👍
Hell yeah Old Man’s Garage for the Win!!! Your voiceovers are awesome I think you should do the Majority of the voiceovers on the Main Channel also you do a very good job at them
Commenting From ‘Marion Ohio’ I miss MCIR being open to the public and seeing you guys run some Badass little hot rods out there I grew up at that Track. That Malibu is a sweet little ride and a 9” Rear End is gonna be a solid Unit for it that’s for certain. I hope you enjoy it for many years to come.
Always love watching you and your family...I gotta head to work so I haft to finish watching this when I get home...keep up the great work Bill
vintage air aircon kits are the way to go they got period correct for lots of vehicles sir
Thanks for update thumbs-up and God bless all 👌
With that new rear end you should be a high 9 in the quarter. Looks great. God bless uncle Terry. Hope he gets caught up. He should hire someone to help him get caught up.
Definitely good to see all the normal faces and voices back around the shop again , if one of them is missing you notice pretty quickly. It’s great to see that new rear end going up in the Malibu she looks like a great fit in there. As always looking forward to what is next , keep us in the know and stay safe.
Thank you for posting for us night shift people! ❤️👊
I want to say thank you guys. Love the channel, very inspiring. I look forward to every post from you guys. Diggin it
Absolutely 💯 12 bolt will do the trick now to keep everything else together, totally dig you videos and the family for your time and effort to help everyone out with your talents
You have always made your audience aware of what is happening
Thanx Bill for allowing me into your life and shop, this all started with SRC BILLY DA KID
good and bad You and Mrs Vicky are Genuine about the facts and
Family, PEACE OUT
HAVE A GREAT DAY 👍😀
It was worth all the enduring to get to where your at. Good to see nice people enjoying what they do with family
I actually have some unobtanium shockshafts still in the package.
Good looking 9” rear end! The disc brakes are a major improvement!
thank you for these videos. i not seen my family for 15 years and it its good to see family is still a real thing
Hi Bill, love what you and the family do with the videos. I have a ‘55 210 that had a 605 steering box conversion done, and to be honest, I don’t like it. You have to steer it constantly, like the tow in is screwy or the box is loose, and I have heard others having the same problem. From what I have been able to research, the CPP 500 steering box conversion doesn’t have this problem. I was going to convert mine to that set up, but have decided to go with a rack and pinion set up instead, for the weight savings. You might look into the CPP set up for your folks’ car.
Did you add caster when you had it aligned. Don't assume the alignment tech did this for you. Most don't know the difference and will use what ever they find for a spec. To need 2-1/2-3-1/2 degrees of caster with the conversion or it will wander like crazy.
Nice rear-end! Now you can test the limit of all the other part's involved! Lol For real though, that is a nice daily driver, I'm loving the progression and explanations along the way! Thanks for sharing
Bill the anti roll you took of the car would make a nice gift to the young lady that you talked to at the parts store. Just a thought 😁
55 chevy....use a cold case radiator in the 6cyl position in front of the core support...this gives you all the room you need to do whatever....LOVE YOU GUYS
I’m building a small block for my g body Monte Carlo ss as well.. like how you guys are into radio control!! I been into rc cars since I could remember.!? Got a trx4 e revo brushless and a nitro. Looking at them drag cars lately.. keep the videos coming please and thank you!!👍👍👍
I am ready for work and have to sit and watch this first lol
My lands,so cool..luv has Tim from Michigan..
Another enjoyable video.. SO MUCH BETTER THEN CABLE TV! With videos like this, Billy's channel and Gen 2 channel... who needs cable?? Not me!
I really wish you’d cover up that unfaced fiberglass insulation it’s making me itchy looking at you breathing it in LOL!!
Love love love your channel!!
I bet tomorrow's video will be ms Vicki giving bill hints to shave lol. Love the content sir! Looking at starting a project here soon
I was hoping to see y'all down here at Twin River Raceway this weekend. But with all this rain we have had there is some major flooding going on in eastern Kentucky and southwest Virginia. Hope to see y'all down here eventually.
Welcome back Kenny !!! Hope you were able to get moved !!! We all miss your Camaro !!!
My favorite videos with my morning coffee! Bill I commented on your last video that I am gathering all my stuff up for my Traxxas t Maxx 3.3 truck that has about every piece of Integey aluminum parts made for it it's color scheme is is polished aluminum and red Integey red shocks, it only has about 6 hour's off run time and it is just a shelf king, I'm going to send it to you soon as me and the wife get everything together, I even have the original box
Maybe your new friend Addie will need that rear end for her new Malibu !!!!!
She’s probably already got at minimum the same rear already in it but since the cars already been built some, it may have been upgraded to a ten or twelve bolt so Bills spare would be going backwards for her. But who knows what the hot rod gods will have planned for the thing so put it out back in the stables for future use in something
I'm sitting here watching you and it's amazing how comfortable you have gotten making these videos that content just keeps getting better and better so is the Malibu it's looking amazing
After racing with one, I wouldn’t run any rear coil spring car without a TRZ Anti roll !! You’ll love it !
Thanks for the update. I had to watch some of your older stuff. you tube was getting boring. Been watching the channel for along time. I'd like to grab one of the SRC plates. Glad to see you all testing again.
Well you have a lot in the frying pan there . It's good things are going well and your able to get parts found. It sounds like made be you could have sometime to relax if you want. Bill always great to see things going well . Have a great day 🖐
I’m getting ready to install the nitrous outlet kit on my 98 Camaro. Because of you guys I’m finally closer to getting into racing. Cam, springs and header swap done and now to install my 9” Qp rear end and nitrous controller. Can’t wait to get out to a few races soon. Thanks for the motivation guys!
You need turn downs for your mufflers to keep from putting all that heat 🔥 on your rear-end
The malibu is looking sick bill. Especially the rolling shot at the end.
Well if your're going to add a Ford part to a Bowtie you got the right part in my mind!
You finally got a good Ford part in your car, good on you Bill!
Thanks Bill so much you've given me new hope in few areas you guys are awesome the whole group 😀
Bill I was one of the guys asking about why uncle Bob did not build the motor. Totally slipped my mind about him having covid. Can relate to that as I got that Wuhan Virus in the second week of December 2019. All the doctors thought I was nuts until the serology test results came in.
It’s no secret that Jr and I haven’t had the best relationship the past few years. It’s been difficult to watch some of the things that have transpired. I think for a while both boys considered me toxic in that there was no way dad could be right about so many things that can go wrong. “Dad hates everyone” but the fact is we were getting over run by situations that could ultimately lead to disaster, both financially and physically. We aren’t out of the woods yet. But I can see the boys growing wiser every day.
That rear ended looks sick!!
Bout time! Got one in my 98 Formula T/A and won't sell it for less than the full price of a new Moser installed in it. Those 9" rears are soooo Quiet! Built for trucks but no more truck sound LoL. 427lsx Florida car with air. Race weight 3600 with me[225]in it.
Love the video brother all the way from new Zealand
It has rained in northwest Florida for weeks,it sucks.
Overnight crew checking in, just in time for my lunch break! Thanks Bill.
Look forward to every upload in the morning with my cup of coffee