@CozyRC oh, sorry... No, ment stuffing tube... I measure how much collet slides over motorshaft. That's the space leave between collet and stuffingtube. Also, when i glue/kit stuffingtube on its place i also do that with drive shaft in it. That should give bit less chance off mis alignement... Fijne kerstdagen toegewenst.
Yeah, the smoke was kind of scary! I feared I blew up the electric setup. Luckily, it was an easy fix, and now she's going great! Oh yes, 100+ with this setup is possible. Without turn fin and with a 638 or 640 prop, it will pass 100km/h, I'm pretty sure! But I will not run yours anymore. It is for you to explore it more. 83km/h to beat with this prop. You can do it 😊
Bad jokes aside. Last time I run my F1 tunnel at 8S for 15 min ( second pack of batteries of the day ) the connector in series XT90 plugs disconnected from the wire, because the solder melted! So ... Yeah I get it.
@CozyRC thank you for the QS8 suggestion. Didn't know about those. I've been reluctant in trying 12S because of that. Plus maybe a bit of a break between runs. But I was having so much fun beating the 😂 hell of a Traxxas Disrupter 4S that I kept going. I joined a local gang of rc enthusiasts that "operate" all sort of Traxxas toys. Mostly cars but they also have boats. Finishing the T800 now. I want to keep beating the Traxxas boys into submission 😂
Or run bit more space between collet and shaft... I tend to make as much room as it takes to get the collet off the motorshaft...
Hi Peter, I don't understand? Are you talking about the flex shaft, motor shaft?
@CozyRC oh, sorry... No, ment stuffing tube... I measure how much collet slides over motorshaft. That's the space leave between collet and stuffingtube. Also, when i glue/kit stuffingtube on its place i also do that with drive shaft in it. That should give bit less chance off mis alignement...
Fijne kerstdagen toegewenst.
Ok, Clear! Yes, that's how I aligned the shaft. But the motor is mounted in slot holes, so it was set too high in that run.
awesome! thank you for doing these videos...it ain't easy you know
Thank you for your feedback!
Proficiate !!!! 👍👍💪😉
Thank you 😎
Kamu membangun channel ini bukan dengan waktu yang singkat, semoga kesuksesan menyertaimu saudaraku 🙏😊
Thank you! I hope there's lots more great projects to come 😎
Okay, I'll wait for the next project. 😊
It was a bit scary 😮
So +100 it is possible on 4s😉
Yeah, the smoke was kind of scary! I feared I blew up the electric setup. Luckily, it was an easy fix, and now she's going great!
Oh yes, 100+ with this setup is possible. Without turn fin and with a 638 or 640 prop, it will pass 100km/h, I'm pretty sure! But I will not run yours anymore. It is for you to explore it more. 83km/h to beat with this prop. You can do it 😊
@CozyRC yes it will be nice to play with different props
Yes, we can learn from each other! I'm also going to run mine in the small round pond to set some good lap times 👍
@CozyRC Dim's shrimp ready to maiden run?
@@daiciuapostol79 almost! I will paint it in the upcoming days
I thought you only build electric driven boats... gas/steam engine now? :D Great run!
Thanks! I tried steam, but I didn't really like it 😅
Bad jokes aside. Last time I run my F1 tunnel at 8S for 15 min ( second pack of batteries of the day ) the connector in series XT90 plugs disconnected from the wire, because the solder melted! So ... Yeah I get it.
I would love to see your F1 running on 8S! And I think you need to upgrade to QS8 connectors
@CozyRC thank you for the QS8 suggestion. Didn't know about those. I've been reluctant in trying 12S because of that. Plus maybe a bit of a break between runs. But I was having so much fun beating the 😂 hell of a Traxxas Disrupter 4S that I kept going. I joined a local gang of rc enthusiasts that "operate" all sort of Traxxas toys. Mostly cars but they also have boats. Finishing the T800 now. I want to keep beating the Traxxas boys into submission 😂
Sounds good, meeting new RC friends! And I'm curious about your T800 result!
I'm worried then I got a 3900kv 2 pole rated at 12.6v max
That should be no problem, just run it on 3S max! You will have almost exact the same rpm as my 2900kV on 4S
@CozyRC really I'm just afraid that will be pushing it to the threshold yikes!!!!!!
@CozyRC on 2s it is around 31,000
Ok, then run it on 2S to be on the safe side 😎
NO Teflon needed!!
I tried it without, but it's less smooth running. Maybe if you use a smaller brass tube, it's OK.
Divide your speed buy 1.609 to get Mph
I will try to mention he speed in mph as well, but I'm from Europe, so I'm used to km/h 😎
🚀🚀🚀🚀