Thank you for the phone call, got mine going with your help, it take it from my DNCMicro2 so easy, My issue was the ribbon was not put back on when someone retroed the dual battery, Thank again for the help
Nicely done, man! Thanks for taking the time and walking thru the process! I was able to successfully establish a good handshake with a usb to db25 interface.
Question about old cnc controllers fanuc, etc vs hobby controllers like Acorn, Masso, Linux cnc. What do you think about retrofitting cnc with old controller with one of the hobby controllers. are any of them better than old controller. Because if i am correct retrofitting old fanuc with new one is expensive. Is there any chance to hobby controller to beat controller from newer cnc.
I've been involved with Centroid conversions on four machines in a commercial environment. Highly successful. It can be a lot of work, but super satisfying.
I was having some problems sending a program to the machine when I noticed a blank space just before the end of another program that I downloaded from the machine It may have had an invisible character because when I copied and pasted the blank line into my new program I was then able to send it to the machine. Is it possible that a blank line could contain some information?
I have a usb adapter to rs232 worked fine for years now all of a sudden I get an error message on the computer "unable to open port" any ideas what could cause this? have not changed any settings.
Strange issue. 2 of my machines will stop and on the screen it will say "waiting". Most of the time I hit reset and the machines will run fine. I'm running 2 Haas mills on a Phase Perfect phase converter. Any ideas?
Hello brother I’m appreciated and thank you so much a time you maked a video and very good teacher. I’m appreciated and thank you I’m have a problem with my old 2005 VF 4 Hass machine This machine used Floppy Drive.. I’m not get luck with loading programs All the time than I just purchased GoTek Emulator from amazon But I install I go Edit go F1 decrtorry bút doesn’t get a file ! Look like GoTek doesn’t see any usb file from thump drive . What did I do wrong? I need to download GoTek software and to my desktop before load prongram in ? Could you help me with please I’m ready appreciated and thank you 🙏
Thank you for the phone call, got mine going with your help, it take it from my DNCMicro2 so easy, My issue was the ribbon was not put back on when someone retroed the dual battery, Thank again for the help
Thank you. I'm just about to buy an old machining center. your videos will be very useful.
Nicely done, man! Thanks for taking the time and walking thru the process! I was able to successfully establish a good handshake with a usb to db25 interface.
Look forward to the DNC to the machine video, can you restart to feed DNC program from the computer mid stream?
Really thanks for sharing this with us!!!🥰
Hi, Good Video, would you be able to make a video on how to install drivers into a PC104 Board on a EC400 Haas ?
It’s in the works
Question about old cnc controllers fanuc, etc vs hobby controllers like Acorn, Masso, Linux cnc. What do you think about retrofitting cnc with old controller with one of the hobby controllers. are any of them better than old controller. Because if i am correct retrofitting old fanuc with new one is expensive. Is there any chance to hobby controller to beat controller from newer cnc.
I've been involved with Centroid conversions on four machines in a commercial environment. Highly successful. It can be a lot of work, but super satisfying.
I was having some problems sending a program to the machine when I noticed a blank space just before the end of another program that I downloaded from the machine It may have had an invisible character because when I copied and pasted the blank line into my new program I was then able to send it to the machine. Is it possible that a blank line could contain some information?
I have a usb adapter to rs232 worked fine for years now all of a sudden I get an error message on the computer "unable to open port" any ideas what could cause this? have not changed any settings.
Strange issue. 2 of my machines will stop and on the screen it will say "waiting". Most of the time I hit reset and the machines will run fine. I'm running 2 Haas mills on a Phase Perfect phase converter. Any ideas?
Haas sucks, its built to fail in 3 years when the warranyy expires. I do cnc repairs, I can feed my son thank to this brand
Hello brother
I’m appreciated and thank you so much a time you maked a video and very good teacher. I’m appreciated and thank you
I’m have a problem with my old 2005 VF 4 Hass machine
This machine used Floppy Drive.. I’m not get luck with loading programs All the time than I just purchased GoTek Emulator from amazon
But I install I go Edit go F1 decrtorry bút doesn’t get a file ! Look like GoTek doesn’t see any usb file from thump drive . What did I do wrong? I need to download GoTek software and to my desktop before load prongram in ?
Could you help me with please I’m ready appreciated and thank you 🙏