Great job explaining! My dealership has done the first oil change & they messed up BIG-TIME! I had many ounces of engine oil puke out of the air cleaner and land on my garage floor. So I took it back and they explained they added too much oil after the oil change because they weren't aware of letting motor run and let oil settle before checking and adding more oil. Well done D-Ray Smith! Thank you.
Great Video! I have a 2019 Yamaha Wolverine X2 and today I am replacing and upgrading tires to 10 ply and waiting for the Yamalube to arrive with filter. I liked how you kept repeating over and over "Do not over tighten". Great advice. This is my second year of owning the Wolverine and I drive it all over Western Montana roads and forest roads and I am going to religiously change the oil and filter every year. I do not want to ever screw up and your video will be my guide! Yay Buddy!
I have seen so many of these videos on doing mechanical work as a qualified diesel mechanic myself this video is the best I have ever seen so precise and clear!!! Well done guys awesome work!!!
Thank you for your video. I just purchased the 2024 Wolverine X2 1000. I have no mechanical experience. I’m a visual learner and this really helped. Thanks
You two are having way too much fun!!!! I love these maintenance and repair videos that you both provide. I always learn from them. Again, thanks for all you do and have a Very Happy New Year!!!!
You don't need to remove that access panel to get to the oil filter, just take a band clamp style oil filter wrench, and stick it back there. I was able to do it while the vehicle is on the ground. Saves you a ton of time, there's plenty of room back here for your hand to reach in and grab that oil filter.
I ended up filling the engine oil through the filler hole on the top of the engine near the spark plugs. I didn't even know about that oil reservoir off to the side. I'm hoping it circulates everything just fine where it needs to be lol. Wonder if I should drain and refill.
I always instruct people to only use a 1/4" drive short ratchet and socket and only run down by hand and then barely bump the ratchet to snug it and leave it be... I've seen dozens of ruined cases and diff housings from the Rambo torque guys efforts... Keep up the good work and maybe more videos this year ?
Dray you still responding to comments, one question is the clutch adjustment video u Filmed like 10 yrs ago on the 200 atc the same for the 185s an would u happed to know what the carrier mounting bolts specs on a 185s are?
Great job explaining! My dealership has done the first oil change & they messed up BIG-TIME! I had many ounces of engine oil puke out of the air cleaner and land on my garage floor. So I took it back and they explained they added too much oil after the oil change because they weren't aware of letting motor run and let oil settle before checking and adding more oil. Well done D-Ray Smith! Thank you.
Great Video! I have a 2019 Yamaha Wolverine X2 and today I am replacing and upgrading tires to 10 ply and waiting for the Yamalube to arrive with filter. I liked how you kept repeating over and over "Do not over tighten". Great advice. This is my second year of owning the Wolverine and I drive it all over Western Montana roads and forest roads and I am going to religiously change the oil and filter every year. I do not want to ever screw up and your video will be my guide! Yay Buddy!
Well done. Thank you for making the service so clear with excellent/professional-like photography👍
I have seen so many of these videos on doing mechanical work as a qualified diesel mechanic myself this video is the best I have ever seen so precise and clear!!! Well done guys awesome work!!!
Those are absolutely legendary Mullets ! love it guy ! Rock on! .
Just bought this model and this video was extremely helpful. Will save me a lot in labor costs in the future. Thank you.
Thank you for your video. I just purchased the 2024 Wolverine X2 1000. I have no mechanical experience. I’m a visual learner and this really helped. Thanks
You two are having way too much fun!!!! I love these maintenance and repair videos that you both provide. I always learn from them. Again, thanks for all you do and have a Very Happy New Year!!!!
Thanks! We love what we do for a living!
I really appreciated your video! Did the first service on my wolverine x2 today. I referenced you guys every step of the way. Thank you
we need to see more videos D ray
Workin' on it!
@@DRaysShop Be great to see how to fix a cold natured 85 big red.
Great video. Everything was well explained.
You don't need to remove that access panel to get to the oil filter, just take a band clamp style oil filter wrench, and stick it back there. I was able to do it while the vehicle is on the ground. Saves you a ton of time, there's plenty of room back here for your hand to reach in and grab that oil filter.
D-Ray is a legend! Both in the shop and at the barber shop 😉
In my own mind anyway... lol!
What are there two drain plugs for the oil?
Best video ever, thanks guys.
The best wolverine oil change video out there 👌 u put what weight engine oil in? Thanks guys
Nice video. Super helpful.
Hey Donnie,hope you n Wanda n the new guy all had a great Christmas and have a great New Year !!
Thanks man, same to you and yours!
Very helpful information 👌
I ended up filling the engine oil through the filler hole on the top of the engine near the spark plugs. I didn't even know about that oil reservoir off to the side. I'm hoping it circulates everything just fine where it needs to be lol. Wonder if I should drain and refill.
I always instruct people to only use a 1/4" drive short ratchet and socket and only run down by hand and then barely bump the ratchet to snug it and leave it be... I've seen dozens of ruined cases and diff housings from the Rambo torque guys efforts... Keep up the good work and maybe more videos this year ?
How do I turn the sound on
Good clear Instructions. Thanks
awesome video. Thanks fellas
Great vid guys, thank you! So as far as the engine oil specifically, it ended up being about 3 qts total then? Thanks!
Thanks fellas , exactly what I was looking for .
great video
great job
Hey brother do you have a video on the adjustment for the auto decompression lever say for an xr200?
Great video, very well done and Have a Happy New Year.
Thanks, happy new year to you and yours!
Did you have any trouble getting your dog comfortable with sitting in the Wolverine ?
awesome! thanks
Awesome! More wolverine videos please!
Great video thank you!
Yo guys what’s the best brand coolent to use for my 2021 Yamaha Wolverine x2
Hey do u have to change transmission plug after 15-20 hours as well
So the front rear and transmission is 80W-90 gear oil??
Dray you still responding to comments, one question is the clutch adjustment video u Filmed like 10 yrs ago on the 200 atc the same for the 185s an would u happed to know what the carrier mounting bolts specs on a 185s are?
Thanks great job
Why is my coolant tank always empty and it sits in the radiator about 1.5” down, it holds a pressure test ?
What about for the x4?
that's awesome boys thanks
but you don't show how to get to the two upper bolts that are inside the cab.
can i use Lucas Oil LUC10048 10048 SAE 75W-90 Synthetic Transmission and Differential
Two of the best mechanics in town, love watching your videos. Are the hairdresser's on strike in judsonia 😆😆 keep the videos coming d-ray 👍
Someone needs to manufacture a coolant tank shield for that machine as it's in a very vulnerable location..
Howdy fellas!
Hey! Hope you have a goodun'!
what about 0 rings crush washers
I've seen crush washers with o-rings molded into them in automotive applications, same principle applies to tightening them down also.
I gave y'alls address to locks of love
We ain't plannin' on cuttin' our hair just yet Jeff, so put your scissors away, lol!
That’s a big boy and I am talking about the car
Why not just use torque specs tightening is too subjective. Crush washers should not be reused.
Skipped the most important part removing that stupid panel