DO NOT REMOVE THE POWER SUPPLY FROM THE MOTHERBOARD. THE CONNECTION PINS CAN BE DAMAGED OR RIPPED OFF. It is not needed if it is just a simple cleaning and it risks pulling the connection pins off the motherboard itself.
I was trying to pull it off, but when I read your comment I stopped. Let's hope it still works Update: it's working amazing. Just like it's new! Thank God I don't have the airplane sound anymore 😂
Followed this guys instructions and this genuinely worked, I couldn't stand how much noise my ps4 made while playing red dead. There wasn't much dust in there but what came out really has made a difference. I can still hear the fan working but I can at least here the dialogue now
Mine is matted I’m dirt and grime. The rest of the cocnsole looks fine too me just the fan was absolutely filthy. I hope it’s all I have to clean. I have a Spider-Man ps4 pro and haven’t played it in a while do to noise and my console would overheat and crash
You don't need to remove the power supply wire, just use air duster and whatever you got to clean around, just pulled my pin off and now I have to replace that
😂😂😂 I've gone far in a different video named "PS4 PRO Deep Cleaning" but that's mostly if you also want to replace the thermal paste, in most cases a simple cleaning like this is enough
I don't think I would remove the power cable. From what I can see and have read in the comments, it's too easy to break it, especially in comparison to the PS3 slim. So I would leave it attached in my case. I wouldn't be using a vacuum either but instead, an air compressor. Way easier to blast away the dust on the fan and heatsink.
Cleaned it (it does have some rust or corrosion but thankfully on nothing more than the metal and plastic and nothing vital), thanks to watching this. I wish the PS4 Pro was as open friendly as the PS3 slim or even the PS4 slim. :(
Also if the cable from the power supply to the motherboard has never been taken out it will be a pain to get out at first so be gentle. My first time trying to clean my ps4 pro i accidentally ripped the cables from the connection and had to get them sautered back together at a electronics shop
It looks like you've used some cleaner with your cotton wool pads. If that is the case, could you recommend a cleaner that doesnt damage any of the plastics or electronics? I have some Isoprpyl cleaner, but im unsure if i can use it on the plastic.
I got as far as taking the power supply out. As he took the plug "as mentioned" out. I tried to to the same and ripped from of the plug base off. Please don't make the same mistake as me.
Good job explaining how the wires clipped to the board. I tried removing the power supply the way you demonstrated and the entire plug ripped off the board. Thanks, my ps4 is now useless you hack!
Bruh for my hard disk cover there is a screw that I can’t get to and every video I watch they say “ just pull the hard disc cover and it’ll come right out “ smfh
i need help, i think i broke mine out of place, in minuto 4:31 i was supposed to remove it and it all of it came off, i need help please i dont know if it’ll turn off, someone please answer
Bruh your not supposed to take it off. It's easily breakable and now you gotta buy yourself a soldiering kit which cost less than $20 and basically attached it back
CAREFUL!!! Power supply cable can be detached. As he pulls it, it looks easy. Mine snapped off. Don't fully pull the power supply out if you use this video. You can clean it without doing so.
I have the same issue. I accidentally pulled the connector completely off the motherboard and now it needs soldering to get it to attach and I don’t know how to solder. Did you find any solutions? 😢
Is there a technique to unplug the power supply cord? Because I've been at it for a little bit, and I don't want to force it too much to where it breaks.
Same, because instructions were wrong, some models apparently have this part glued, so you can't disconnect it. The other end needs to be disconnected.
Did you use a T8 screwdriver for the whole breakdown? Where did you get your screwdriver set from ? Link thanks. I need to do a deep clean and add thermal paste.
For a complete disassembly you’d need a Torx T8 and Phillips Screwdriver PH00, PH0 and PH1. There are plenty of PS4 tool kits out there, however, you should find them at any tool store.
It's actually security torx T8. But I disassembled the system with 1,5mm flathead screwdriver. Yes it can be bad for screws, but screw that. I know what I'm doing. Just for those who tend to stuck in the security bit thing. I sure did. Smallest SB TX's I had was 10's in every single toolset I have :)
I've cleaned my fan, it's hard to get all the gunked dust of the fan blades, and alot of it falls under neath. My CD player won't work not as a result of my cleaning, it's got the disc not recognised problem and no common fixes will work,. But I nowadays after being sick of the noise and the console over heating and thus causing games to crash more often, I now just play with the lid off, the sound difference is unreal and yes the console is then exposed to more dust. But the PS4 pro is so loud, once you take the lid off, after 20 seconds it goes so quiet. Funny when I first got the pro I remember thinking how quiet it wascompared to other console I'd had, then after about 3 months, it sounded like it was taking off to the moon.
If a mini vacuum cleaner is the handheld type, that won’t do much and is not powerful enough if your PS4 Pro got some really amount of dust in there. If you check this video ruclips.net/video/82V_kWSkgHA/видео.html you can see the large amount of dust is stuck on the other side of radiator so unless you wanna fully disassembly it, you need a powerful vacuum cleaner. If you’re ready for a complete teardown, then you don’t need a vacuum at all
The insides of my PS4 Pro looked a pit different and all but 2 of the screws had nipples in the center. But I was able to make do with what I had and this video was helpful. Thank you
It's ok to handle, but just don't put anything inside the casing. Capasitors could shock you even after dissabled, but it's actually virtually impossible to insert like your hands inside components.
Jesus Christ they put that top cover on like they hid treasure in there or something😂 spent almost 15 minutes trying to get it off I think… then wen I finally got it off I found out we don’t have screwdriver that fits in either of the two kits we have😃 so ig I’ll have to wait to clean it
I just got a pro a few weeks ago, 2 of the screws on the power supply piece are stripped out, any tip on how to get them out? I was trying to get inside to get to the radiator and make sure there isn’t dust and clean it out but now I can’t because of those screws. I think GameStop probably went inside of it and cleaned it before they resold it and stripped a few screws in the process 🤷♂️ it does look cleaned from what I can see but I still like to do it myself to make sure ya know
thank for the video bro! I had one scare once when I tried to pull the power supply like you showed instead of coming away like your it started separating and I was like WTF ... then I just looked at it a bit closely and just pushed it back in and it all clicked and it's working for years now and I just clean the fan and the parts beneath the plastic coverings ... I guess I didn't do something right but now I am afraid to try to pull the power supply again :D
Yeah, I heard about this happening a lot. It never happened to me, I dunno why on some consoles it breaks those cables. Usually I’m more afraid of ribbon cables than such cables
BE CAREFUL, I just did what he said and removed the bottom part of the power supply cord, RIPPING IT OFF. After further research you are supposed to remove it from the top part that connects to the power supply. I believe i have a different model, please add more warnings into this video, i have to get it repaired.
I tried but ended up not having too. I thought it was supposed to come out because it was hard at first but I figured out that you just pull out the supply and that rubber screw will come out alone
Thanks for this, just cleaned my ps4 pro for the first time. It was quite clean to be fair, but im hoping this will resolve slight glitches i started getting recently.
Thanks. Great tutorial. Fired up my Ps4pro since.. Don't even remember and noticed it being quite noisy. Decided to check out cooler and began to check iFixit tutorial, but very quicky got thought that this is overkill. I just need to get access to fan and cooler and what do you tell. YT saves the day. With this got system cleaned up and ready within like 20mins. However, it was in way, way better state than I though and looks (=sounds :) ) like I gotta began to consider possibly replacing compounds in it. But even so. Excellent tutorial in disassembling to get into critical parts, thanks...
It doesnt matter what i do my playstation is loud asf i cleaned it throughly and still it sounds like its about to take off it sounds like jett engines idleing
@@YesterdaysTech thank you sooooo much, I appreciate it very much, if you had to give me some advice, on what precautions to use in order not to ruin anything? I am really very scared
@@YesterdaysTech thank you soo much, I really appreciate your availability, if I ever have other problems can I ask you other questions? anyway thank you very much you have earned my membership !!
Just ask, why do you pull everything out so easily meanwhile, meet me for me. It’s just it’s like stuck as if they put cement in even though it looks like exact same is that a hole in that screwdriver you used for most of the stuff because I am just stuck. I cannot get some of this shit out because I don’t have that many tools with a hole inside. It’s supposed to have a hole in the end or not. But is the word out now I’m just gonna wait until like the cleaning stuff. I used those baby wipes they dry before I use it. Who the hell am I kidding?
This seems little more complex than my Xbox one x.. my newly acquired ps4 pro from a kid sounds like a jet engine... I'll be doing this aswell. Just completed this process. All worked like a charm! My newly acquired used ps4 pro is quieter than a kitten.
Thanks man! Cleaned it with the kids helping. One thing, while Pwrspply out of the way, hold vaccum cleaner with broader tip above fan, directed at an angle. At the same time blow air through grills, to clean them. Fan does not suck air from the back, but blowa is oyt the back. So radiator grills are congested from inside. When you vacuum from the PS side you just draw dirt deeper into grills.
DO NOT REMOVE THE POWER SUPPLY FROM THE MOTHERBOARD.
THE CONNECTION PINS CAN BE DAMAGED OR RIPPED OFF.
It is not needed if it is just a simple cleaning and it risks pulling the connection pins off the motherboard itself.
Wish I had read these comments before following this guys instructions. That's exactly what happened to me.
I was trying to pull it off, but when I read your comment I stopped. Let's hope it still works
Update: it's working amazing. Just like it's new! Thank God I don't have the airplane sound anymore 😂
@@grunge1677 I was about to pull it out until I read this comment too😂😂😂
Too late for me bruh I ripped out the whole white thing holding the cables anybody know a fix??
@@SandqMan no
Gosh i cant take off the front cover
Try taking it out while wiggling the whole ps4. Worked for me. Just wiggle the WHOLE ps4 up and down very fast while pulling up the cover
It happens the first time you do it
It is very easy with a spoon.
@@That-individual thats really risky
Just use a lot of pressure, dont worry u wont break anything. Same thing happened to me the first time and it all worked out nicely
Followed this guys instructions and this genuinely worked, I couldn't stand how much noise my ps4 made while playing red dead. There wasn't much dust in there but what came out really has made a difference. I can still hear the fan working but I can at least here the dialogue now
After watching this video, I know that you are a man of focus, commitment and sheer rocking will
baba yaga
There are different ps4 models, the first video I searched was different tear down. Thankfully I found you.
This worked perfectly! My ps4 fan was so loud it sounded like it was gonna explode lol. Now she quiet as a mouse
Mine is matted I’m dirt and grime. The rest of the cocnsole looks fine too me just the fan was absolutely filthy. I hope it’s all I have to clean. I have a Spider-Man ps4 pro and haven’t played it in a while do to noise and my console would overheat and crash
😂😂
Gon clean mine out right now too
Mine is the same I can't even play certain game, hopefully I can get it clean soon I can see the dust insofar already.
GG’S
I watched this and realized my Playstation is nowhere near his. His system had lungs like a smoker that's been smoking for 50 years.
😂
Same
That's how badly clogged up your fan was.😂😂😂😂😂
😂 same
Followed this tutorial throughly! Works like a charm!! No more loud airport noise! Thank you!
Where you from
@@hopenkosi937Your mom's house
@@HanzoWasabi bro you didn't have to do em that dirty 💀💀💀
Mine sounds like a freaking leaf blower, should I be concerned?
Yes@@ghepardo456
You don't need to remove the power supply wire, just use air duster and whatever you got to clean around, just pulled my pin off and now I have to replace that
Seems like a lot of people in the comments are having this issue. Maybe y’all just heavy handed?
Skill issue.
Same here😢
the moment u took out the battery I was "like ok I wont need to go further then that" funny neither did you🤣🤣
😂😂😂 I've gone far in a different video named "PS4 PRO Deep Cleaning" but that's mostly if you also want to replace the thermal paste, in most cases a simple cleaning like this is enough
I don't think I would remove the power cable. From what I can see and have read in the comments, it's too easy to break it, especially in comparison to the PS3 slim. So I would leave it attached in my case. I wouldn't be using a vacuum either but instead, an air compressor. Way easier to blast away the dust on the fan and heatsink.
Cleaned it (it does have some rust or corrosion but thankfully on nothing more than the metal and plastic and nothing vital), thanks to watching this. I wish the PS4 Pro was as open friendly as the PS3 slim or even the PS4 slim. :(
@@DarthDragon007I think there’s starting to form rust on the metal panel u see when u first take the top off… is that bad or is that ok?
@@line7596 I'd probably take it off and use soap/water maybe alcohol to clean it as best you can then dry it off thoroughly before putting it back..
@@DarthDragon007 I’ll try that! Thank you😊
Just done this about an hour ago and it sounds great 😂, earlier me and my brother were playing mw2 and it sounded like an airplane
I couldn't access the fan in mine, so I clean it from the outisde. Thanks, my ps4 sounds better now.
What happens if you take out power supply and when unplugging it it tears the connector piece off body and peels the green flakey stuff
That just happened to me :(
Yeah man me too I’m sad asl now
Skip the step where you pull the cord out, theres enough slack to clean whilst its still attached. Saves you risking damaging the pin
Also if the cable from the power supply to the motherboard has never been taken out it will be a pain to get out at first so be gentle. My first time trying to clean my ps4 pro i accidentally ripped the cables from the connection and had to get them sautered back together at a electronics shop
think i’ve just done the same
It looks like you've used some cleaner with your cotton wool pads. If that is the case, could you recommend a cleaner that doesnt damage any of the plastics or electronics? I have some Isoprpyl cleaner, but im unsure if i can use it on the plastic.
For the plastic parts you can simply use water
This is great thanks. Although one point is never let a fan spin as it will be like a generator and sending back unwanted voltage to the board.
No it won’t lol
It doesnt just run by itself. Lol
Just disconnected the power supply who'll clean a ps4 which is plugged in 😂
I got as far as taking the power supply out. As he took the plug "as mentioned" out. I tried to to the same and ripped from of the plug base off. Please don't make the same mistake as me.
Because you pulled too hard maybe
I also made this mistake. About to teach myself to solder so I can fix it. 😅😭
I followed the tutorial and it worked and there is no jet noise thnx bro❤
Great video. I heard that the fan should not turn while cleaning. Thanks
Yes or no
I can’t take the bottom cover off it’s so hard got a solution??
Try with a flat screw
I can't do it it'd hard opening the top I'm afraid I will break it.
Use the back of a spoon
help i cant do this
I wouldn't recommend a vacuum for cleaning a fan unless you keep the fan steady while doing it. Terribly bad on the bearings
Good job explaining how the wires clipped to the board. I tried removing the power supply the way you demonstrated and the entire plug ripped off the board. Thanks, my ps4 is now useless you hack!
Such thing never happened to me
For the fan cleaning, can i use a microfibric cloth instead of a cotton swab?
Yes, without problem
@@YesterdaysTech i did not expect you to reply that quick after a 9 months vid thanks alot ❤️
Bruh for my hard disk cover there is a screw that I can’t get to and every video I watch they say “ just pull the hard disc cover and it’ll come right out “ smfh
Nvm ima dumbass
i need help, i think i broke mine out of place, in minuto 4:31 i was supposed to remove it and it all of it came off, i need help please i dont know if it’ll turn off, someone please answer
Bruh your not supposed to take it off. It's easily breakable and now you gotta buy yourself a soldiering kit which cost less than $20 and basically attached it back
You pulled the cable off the motherboard
CAREFUL!!! Power supply cable can be detached. As he pulls it, it looks easy. Mine snapped off. Don't fully pull the power supply out if you use this video. You can clean it without doing so.
Thanks for these instructions! These were easy to follow and PS4 Pro is now nicely cleaned 👍
How do you remove the bit under the silver plate. Is the middle screw fake?
I can't budge it
Did you try turning it the other way
The screw driver I use just jumps off it. So it's a real screw?
@@SpoodinOot Yea I was using a t8 and it wouldnt budge bc I was turning it the wrong way🤦♂️ then I was able to remove it
Mine has never been open and that screw is a circle. Literally no way to get that off unless i just snap it. Just bs..
I tried putting out the cable from the Board and i didnt work. Now my ps4 wohnt turn on again 😢
Same 😢
How'd you take out that white cord? I'm having a tough time.
Just pull it, should not be that hard
@@YesterdaysTech I got it but thank you for replying! :)
You're welcome 🙂
Mine ripped the port off the circuit board
Really? 😳
Did you use alcohol with the q-tips well cleaning the fan?
Yes rubbing alcohol works and hydrogen peroxide
When I was gonna pull the cable out at 4:34 the base broke from the bottom is there anyway to fix this or is the whole ps4 trash now
I have the same issue. I accidentally pulled the connector completely off the motherboard and now it needs soldering to get it to attach and I don’t know how to solder. Did you find any solutions? 😢
Great vid, just cleaned our ps4 pro, thanks to this video! Thanks!!!
Is there a technique to unplug the power supply cord? Because I've been at it for a little bit, and I don't want to force it too much to where it breaks.
i pulled off the power supply from the circuit board, i was pulling where the guy in the video was pulling and the whole thing came off.
Same, because instructions were wrong, some models apparently have this part glued, so you can't disconnect it. The other end needs to be disconnected.
Did you use a T8 screwdriver for the whole breakdown? Where did you get your screwdriver set from ? Link thanks. I need to do a deep clean and add thermal paste.
For a complete disassembly you’d need a Torx T8 and Phillips Screwdriver PH00, PH0 and PH1. There are plenty of PS4 tool kits out there, however, you should find them at any tool store.
@@YesterdaysTech a
@@eduardobava5174 a
It's actually security torx T8. But I disassembled the system with 1,5mm flathead screwdriver. Yes it can be bad for screws, but screw that. I know what I'm doing. Just for those who tend to stuck in the security bit thing. I sure did. Smallest SB TX's I had was 10's in every single toolset I have :)
Got to ask,, Did you have it in a sawmill? That looks like wood sawdust, not normal dirt and dust.
1:18 one of the screws is stripped how would I go about getting it out
I've cleaned my fan, it's hard to get all the gunked dust of the fan blades, and alot of it falls under neath. My CD player won't work not as a result of my cleaning, it's got the disc not recognised problem and no common fixes will work,. But I nowadays after being sick of the noise and the console over heating and thus causing games to crash more often, I now just play with the lid off, the sound difference is unreal and yes the console is then exposed to more dust. But the PS4 pro is so loud, once you take the lid off, after 20 seconds it goes so quiet. Funny when I first got the pro I remember thinking how quiet it wascompared to other console I'd had, then after about 3 months, it sounded like it was taking off to the moon.
Instructions not clear, microwave has now taken over my bedroom and won't let me in.
Just kidding, awesome video, just what I needed.
Awesome 😂
Can you show how to open the cd rom of the ps4 pro as I have 2 discs stuck in by my little brother
I have a video for that, check my channel
can I use a mini vacuum cleaner and clean it away so it pulls a little and not break it
If a mini vacuum cleaner is the handheld type, that won’t do much and is not powerful enough if your PS4 Pro got some really amount of dust in there. If you check this video ruclips.net/video/82V_kWSkgHA/видео.html you can see the large amount of dust is stuck on the other side of radiator so unless you wanna fully disassembly it, you need a powerful vacuum cleaner. If you’re ready for a complete teardown, then you don’t need a vacuum at all
i did the samething as you did and omg this works %100 its so quiet when playing god not like a jet anymore
did you just clean the fan or did you clean everything including the heatsink
@@RosJ i clean out both of them that was in this video best way i can so it helps
Bro which screwdriver is needed to open the back screw that seal needed to be opened with dryer
Can you just clean the fan and be done with it there? I mean, will it stop being so loud by just dusting the fan?
The insides of my PS4 Pro looked a pit different and all but 2 of the screws had nipples in the center. But I was able to make do with what I had and this video was helpful. Thank you
Tbh I had one over the warranty but broke it off
Hello, im am wondering is it ok if i do not touch the power supply. Since its my first time doing it i am a little scared to touch it.
If the PS4 Pro is unplugged, there's no need to be afraid
It's ok to handle, but just don't put anything inside the casing. Capasitors could shock you even after dissabled, but it's actually virtually impossible to insert like your hands inside components.
Jesus Christ they put that top cover on like they hid treasure in there or something😂 spent almost 15 minutes trying to get it off I think… then wen I finally got it off I found out we don’t have screwdriver that fits in either of the two kits we have😃 so ig I’ll have to wait to clean it
I just got a pro a few weeks ago, 2 of the screws on the power supply piece are stripped out, any tip on how to get them out? I was trying to get inside to get to the radiator and make sure there isn’t dust and clean it out but now I can’t because of those screws. I think GameStop probably went inside of it and cleaned it before they resold it and stripped a few screws in the process 🤷♂️ it does look cleaned from what I can see but I still like to do it myself to make sure ya know
It’s pretty hard to deal with damaged screws, try using a rubber band, maybe it helps the screwdriver to unlock it
@@YesterdaysTech yeah I figured it was a bitch to get it out, I’ll just have to try what you said or look up different things to try, thanks.
I broke my ps4
Damm srry
me too ☠️
same
same
That's sad bro
Also, never use the air thing to spin the fan. It'll break the fan. Hold it in place with a q tip
I feel like all you need to do is the first part. After that it’s clean.
thank for the video bro! I had one scare once when I tried to pull the power supply like you showed instead of coming away like your it started separating and I was like WTF ... then I just looked at it a bit closely and just pushed it back in and it all clicked and it's working for years now and I just clean the fan and the parts beneath the plastic coverings ... I guess I didn't do something right but now I am afraid to try to pull the power supply again :D
Yeah, I heard about this happening a lot. It never happened to me, I dunno why on some consoles it breaks those cables. Usually I’m more afraid of ribbon cables than such cables
I will try this method at first but if my Jet engine carries on I might try replacing the Thermal paste
I have another video for replacing the thermal paste on PS4 Pro, Good Luck! 🍀
I dont have this special screwdriver is there any other way how i do it or i need to by one?
Big help after cleaning. Put an SSD drive in it. Get rid of the crappy disk drive. Creates too much heat.
I got the same tr8 screwdriver but those on the metal aren’t coming out it’s like slipping.. what else can I use?
Had same problem, I just used a tr9
BE CAREFUL, I just did what he said and removed the bottom part of the power supply cord, RIPPING IT OFF. After further research you are supposed to remove it from the top part that connects to the power supply. I believe i have a different model, please add more warnings into this video, i have to get it repaired.
To late i already ripped it
Tack!
Im actually really confused about the black plastic screw on the power supply, some videos show them taking it off but some don’t.
I tried but ended up not having too. I thought it was supposed to come out because it was hard at first but I figured out that you just pull out the supply and that rubber screw will come out alone
Bro, what? The thing won't budge, how do you open it so easily 😢
I can’t take off the screw on the right, there’s something in the way that won’t let me take it off, it’s in the middle of the socket
Same, I had to scratch out some of that material that's obviousely there to prevent you from opening up the device.
This dude sounds like a villain in a Steven Seagal movie. 😂
😂
I'm lucky it's only dust but it's the kind that is very hard to get off without water
You really helped with that video, but my ps4 is still so loud I don't know what to do
I have another video where I also replace the thermal compound, that may help
I am having problems trying to put the ps4 parts in, I am actually kinda stuck.
My cable was welded in to the mother board, i was never able to get it out, it's now very lose because of how welded in it was.
I want to clean my ps4 but i dont want to do alll of that. How often should i clean it?
Once every 2-3 years would be fine
i can not unplug this cable. it won’t come off 4:34
Thank you this was sooo helpful you just earned a sub
How you are repairing in your ps4 pro?
What do you mean?
@@YesterdaysTech but On next day I'll got to repairing my console ps4
Good
Thanks for this, just cleaned my ps4 pro for the first time. It was quite clean to be fair, but im hoping this will resolve slight glitches i started getting recently.
Thanks. Great tutorial. Fired up my Ps4pro since.. Don't even remember and noticed it being quite noisy. Decided to check out cooler and began to check iFixit tutorial, but very quicky got thought that this is overkill. I just need to get access to fan and cooler and what do you tell. YT saves the day. With this got system cleaned up and ready within like 20mins. However, it was in way, way better state than I though and looks (=sounds :) ) like I gotta began to consider possibly replacing compounds in it. But even so. Excellent tutorial in disassembling to get into critical parts, thanks...
Glad it helped
Bruh i cant get the middle screw out dawg, like theres a little pike in the middle and wont allow anything to twist it free
It's not normal Torx bit. It's security one. I opened mine with 1,5mm flathead screwdriver. I'm not suggesting to use it, but it can be done.
Do i have to download the data from my hard drive before cleaning my ps4 or i just take it out?
Just remove it while cleaning, no backup needed
It doesnt matter what i do my playstation is loud asf i cleaned it throughly and still it sounds like its about to take off it sounds like jett engines idleing
I have a deep cleaning video, maybe that helps
I heard that the hard disk will erase stuff if removed, that true?
That’s completely false
Are all the screws the same size?
Bro this vid made a my PS4 break it won't turn on no more
Same 😢
Yours comes off so easily. For me I’m using all my strength for it and it won’t pop open. Mine is jammed or something
That’s strange
Bro what type of Phillips PH0 do you use like what millimeters??
I think PH0 would be 3.0 mm
@@YesterdaysTech ok thanks
Hi, which torx did you use? what type of screwdrivers did you use?
Torx TR8 and Phillips PH0
@@YesterdaysTech thank you sooooo much, I appreciate it very much, if you had to give me some advice, on what precautions to use in order not to ruin anything? I am really very scared
Just follow the video, if you do it step by step, everything will be fine
@@YesterdaysTech thank you soo much, I really appreciate your availability, if I ever have other problems can I ask you other questions? anyway thank you very much you have earned my membership !!
Sure, feel free to ask anything, if I'm able to help, I will gladly do it
Just ask, why do you pull everything out so easily meanwhile, meet me for me. It’s just it’s like stuck as if they put cement in even though it looks like exact same is that a hole in that screwdriver you used for most of the stuff because I am just stuck. I cannot get some of this shit out because I don’t have that many tools with a hole inside. It’s supposed to have a hole in the end or not. But is the word out now I’m just gonna wait until like the cleaning stuff. I used those baby wipes they dry before I use it. Who the hell am I kidding?
I'm not sure if you're kidding. Regarding tools, I suggest to get the proper ones before starting
Thank you so much walkthrough explaining and showing slowly. Now my ps4 sound silent
I really cannot take off the hard disk cover. Any tips??
Just pull it gently it'll get off
I can take off the cover but i cant get to the fan 😢
Bit size on the first 4 screws?
Wait bus doesnt vacuum cleaners kill the motherboard?
This seems little more complex than my Xbox one x.. my newly acquired ps4 pro from a kid sounds like a jet engine... I'll be doing this aswell.
Just completed this process. All worked like a charm! My newly acquired used ps4 pro is quieter than a kitten.
I was trying to take the cover off but when I heard it was about to come off I thought I was gonna break it 😅
😂
Thank you i cleaned it but now it dosent sounds like a jet taking off😢
Can we use compressed air spray to clean it?
My thing is now destroyed could you help me in some way?
Thanks man! Cleaned it with the kids helping.
One thing, while Pwrspply out of the way, hold vaccum cleaner with broader tip above fan, directed at an angle. At the same time blow air through grills, to clean them. Fan does not suck air from the back, but blowa is oyt the back. So radiator grills are congested from inside. When you vacuum from the PS side you just draw dirt deeper into grills.
ive done it and it works thx but it was war tryna take the botom cover off man my fingers are peeling how much force i aplied to it lol
I broke that power supply connector is it will be fixable
Needs to be soldered.
@@jothain thanks bro I fixed it
Nice video, it helped me. Thanks bud
Glad it helped