DIY: Programming a Dodge Keyless Remote
HTML-код
- Опубликовано: 17 дек 2015
- Video tutorial on how to program or add a new remote to your Dodge. This particular Dodge product I am working with is a 2003 Dodge Dakota, but this procedure does apply to other Dodge models, as well as Chrysler, Plymouth, and Jeep models. In order to add or program a keyless remote, you must have a working existing one. Up to four keyless remotes can be programmed to one vehicle. When adding or programming remotes, you must add all the extra remotes within 30 seconds during the programming sequence.
Website: 4diyers.com
Facebook: / 4diyers
Google Plus: plus.google.com/+4DIYers
Twitter: / 4diyers
Instagram: / 4diyers
Tumblr: / 4diyers
Pintrest: / 4diyers
Tools/Supplies Needed:
-working keyless remote
-new keyless remote
Procedure:
-to program a remote, turn the ignition switch to the ON position but not with the engine running
-press and hold the unlock button on a currently working remote for 4 to 10 seconds
-while pressing the unlock button, press and release the panic button
-release the unlock button which should be followed by a chime
-this will indicate that the module is in programming mode
-within 30 seconds, press and release the lock or unlock button on the new remote at the same time
-then do this same step for any other remotes you wish to add to the system
-successful programming will be indicated by a single chime
Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author. - Авто/Мото
Excellent video!! Only took a few minutes to program the new remote to our Jeep Liberty. Saved us a small fortune at the dealer for something so simple to do.
Thank you so much and happy to hear I could help!
How to program fob don't have old one 2001 dk
Thank you so much I follow your instruction on my 2000 Chrysler town and country on my fob keyless and glad to say it works great,,,, everyone remember the 30second window to program the other remote
Glad to help out and thank you for sharing your feedback :)
I tried a BUNCH of other suggestions BUT THIS ONE ACTUALLY WORKS!!!
Mahalo
Happy to help! Thank you for the feedback.
Thank you for this video. I just bought a spare remote from a local dealer and they told me it takes 45 mins for it to program. I just followed your instructions and it worked. it saved me $90 of unnecessary labor. the dealer tried to rip me off.
Glad to help out and awesome to hear you saved money too! The remote used here was actually purchased from the wrecking yard from a scrap vehicle.
@@4DIYers Wow, Just bought my Chrysler Neon fob from eBay today and i was worried cause it is not new... But my worry is, unlock button just didn't work today.... I suspect it is torn rubber button
I used your method on my 2006 ram 3500 and to my surprise it actually worked.
Thank you so much.
Saved me time and money.
Excellent to hear and thank you for the feedback! Don't forget to subscribe :)
Dave Van Meter your a typical keyboard bully.
Dude. Thank you very much! Watched one video, gathered nothing from it. Watched this video, now I have a second fob. Thank you very much.
Awesome to hear, happy I was able to help!
Worked perfectly. Thanks for making the video.
Worked like a charm on my 2005 Dodge Caravan. Thanks!
I have a 2003 Chrysler Voyager. After purchasing two new keks and two new fobs I began looking for any programming help the internet might offer. I was happy to find out that owning two programmed remotes and keys, I can perform a DIY process to get things working. Another video helped me get the keys working. This video really helped me get the fobs working. It was the only one I could find that mentions "you have to reprogram ALL the fobs once you get the car into a "learn" mode. The other videos never mention this. It's critical to know this. Because even the original fob has to be programmed during the sequence. If you don't, that original fob WON'T WORK. So program all fobs new AND old during the "learn" mode. Thanks for clarifying that! JJ 👍
Thanks for the heads up, I tried multiple times to program 3 remotes, but after programming two, The third one didn't program and was unusable.
I finally tried your method here and lo and behold, All three remotes worked fine.
I didn't hear any chirps or chimes so I just ignored it. Thanks
Your video is Quick and to.the point! And it worked! Thanks!
thanks. the instructions that came with the remotes i got from amazon were wrong. i tried "chatting" with the vendor and then came here and when YOUR sequence worked PERFECTLY i sent them this youtube link. chat is useless and the gal in bangalore suggested i disconnect BOTH batteries on my ram and wait 20 minutes. youtube is so handy!
for me your instructions worked , thanks!
Excellent to hear :)
I love this video just made my self 2 extra fobs incase I lock them in the truck. Took the length of the video to complete your a life saver❤
Glad it helped and thank you for the feedback!
Didi this today and it worked perfectly. Thank you!
No problem, happy I could help!
What kind of vehicle do you have?
GREAT!! Worked perfectly!!! Awesome!!!!!
Glad it helped and thank you for the feedback!
worked awesome thx for posting
Thank you. My FOBs came with incorrect instructions. Your instructions work.
You're welcome!
@@4DIYers I have two of these for less than 2 months and they both stopped working suddenly. Are you familiar with these items? Are they junk? I changed the battery and still don't work. Does changing the battery require reprogramming? I tried that and they still don't work.
Great, simple, clear and accurate!!
Thank you!
Thank you so much that was so simple to do
You're welcome!
Thanks this worked for my 2005 neon srt4!
You're very welcome!
Thank you for posting
You're welcome!
I tried the procedure and worked great thanks
Awesome to hear and thank you for the feedback!
Did you press the panic and lock on the keyfob inserted in ignition or the new keyfob??
@@Momma2Many The existing working remote!
Had no luck. Unfortunate. Maybe I am.just.not doung things right.
Worked As your Directions said!
Thanks for the video! Just took a couple minutes and a couple trys!
Ignore all the not so smart questions you answered in the basic video...
Happy to help out and thank you for the feedback :)
4DIYers how would you program one if you don't have the original remote?
Unfortunately a dealer or locksmith is needed for that to access the vehicle's computer.
Thanks buddy, you're the best! Very easy instructions worked perfect, thank you!
No problem, happy I could help!
How can I program my new remote I dint have the old one
@@helenvuittonet9561 your beat. Go to dealer
Thank you
I followed your instructions for my 2003 Dodge Ram. The new remote now works for locking and unlocking the doors but the headlights no longer blink and the running lights no longer come on. This is also now true when using my original remote. How can I get the lights to work correctly as originally? Very important at night.
What about changing the CTM or BCM and and programming your original remote to the new module? Dealer required?
WOOAH BUDDY YOU JUS SAVED Me some 💰🔨💸
Right on, awesome to hear!
Perfect. Thanks man
Happy to help :)
Awesomnimity!!!!
Thank you :)
It's works with 2003 Chrysler Voyager 2.5 Crd European Version, but after you reprogrammed the new one you have to reprogrammed also the old one at the same time, if you don't do this, will work only the new one.
Unfortunately if the remote accessing the programming sequence isn't the original, then it will need to be reprogrammed along with the new remote.
My fob dead on me have to buy a new one, after watching this video now I can do this my self 👍
i just got my 2005 Dodge Neon, yesterday. and it doesn't have a remote thing, will it work if i buy one and program it?
What happens if you don't have the original key remote. The past owner never gave it to me.
That’s what I wanted to see
@@ricardodesouza7229 me too...I lost my only key fob and need to program 1 from scratch
Seems like no one have the answer to that
Me to
You can buy a doorman programmer that plugs into the obd2 port. Then follow the instructions included. That's how I did mine. Cost about $50.
Did it on my 2005 dodge ram works perfect
Awesome to hear!
I have a 2004 dodge ram 1500 without a remote. I bought one at AutoZone not knowing I needed the original. I had called the dealership they told me they can program it with the scanning tool, they needed the key. There is not a guarantee that it would work considering it is an aftermarket truck but would still charge for the service.
Dorman part#99164 worked for me and I didn't have a key fob to copy hopefully this helps and I did order on Amazon. I have a 2004 dodge ram 1500
Thanks, seems like a valid option I'll try.
I bought a 2006 dodge stratus sxt from a private owner. So I don’t if my car Is equipment with keyless entry. On my manual says It does but Never had one for this car. Can I still get one to try to see of it works? Thank you.
Hi, does this method work for 2017 Dodge Charger? My friend wants to be able to unlock her trunk n car door keyless. Nice explanation btw! Thanks
Will this work on a 2000 dodge dakota?
does this work for a 97 intrepid the instructions included with my fob say to connect pins on bevel behind my middle vents
Is it the same procedure for the Jeep with the key & remote Fob in one unit ?
Hi I have a keyless fob that works for look and unlook but also have a fob for the remote that was installed by a different company. My remote fob it is not working so I bought the same kind but I can not program it. I tried to do what you did in this videos but my key fob when I turn on the ignition the panic button goes inside the ignition so can not press and hold that button.
worked to the point of original remote does not work .. but new one does.. try re doing process ,but cant get a chime now .. any suggestions ?
Quick question. Will this work for a 2014 Ram 2500 longhorn fob? I have two, but one isn't working and I would like to buy another and possibly program it myself. It would be greatly appreciated if you could get back to me on this. Thanks in advance.
Want do you do if you have no panic button but a rear lift door button thanks Jeff
Do you think this would work on a 2016 Ram 1500 key fob??
Will these methods work on a 2014 didge ram 1500 keyfob?
I just bought a 01 Dakota and my keyless entry isn't working, I've tried this multiple times, checked my remote at AutoZone so I know the battery's good, but the truck also has a remote start that doesn't work so I'm guessing it might have something to do with that?
Hi, I have a chrysler voyager 2007, but have no panic button. It,s a five button fob. Thanks
This video save me $80 from having to have my other remote program whoever did this video thank you
Awesome to hear and happy to help out :)
I have a 3 button remote for my 2003 Jeep Cherokee 2.8 CRD which does not have a "panic" buttom just a rear hatch button as well as the lock and unlock ones - can this be used to reprgramme a new fob and how?
Hello... I have a Dodge Caravan 2007.. I tried this, and really wanted it to work, but, sadly, it did not. I followed all the steps too. Is there any advice you can give me as to why?? I really wanted to do this myself. Please do let me know if you have any ideas. Thanks. :)
update i get a beep in my charger 07 after doong the unlock plus panic and release
I dont know what went wrong. I have a 2001 Intrepid. I followed your instructions, but now my car wont start. The 3 fobs lock and unlock the doors, but now it's like the alarm is triggered and ignition is interrupted when I turn the key.
Dash lights flashing, parking lights flashing, etc.
Can you help?
Looks like a fairly easy process. I couldn't see what you were doing too clearly, because of the way it was being held.
I have the process also written in the description too.
I have the original fob but the unlock button doesnt work but everything else does. Is there another way other then a locksmith or dealership?
Will this work if the buttons are on the remote?
I can get the first chime but I can’t get my new remotes to chime?
Got a 2002 dodge caravan going to get key made tomorrow how do I program it it just a normal key but I think has lil chip in like the key u got here in video
Is there a way to disconnect the oem alarm and use an aftermarket one?
Can’t believe this worked on a mexican Cirrus
Damn, thank you!
You're welcome!
Wondered what I was doing wrong. Was holding the unlock button down for ten seconds or more then the panic. Went back and did it for six seconds and it worked just fine. Thanks
No problem, happy to help!
THIS WORKED!!! Thank you so much, this worked on a 2001 Dodge Durango with the exact same key fob that you used.
Excellent to hear and glad to help out :)
Hello went to dealer to have 2 new fobs programed on my 2005 town and country . . they could not get buttons to work on new fobs and original does still work except when I press the lock button I no longer get a chime arming the alarm . Please help .
I have a 2012 Dodge journey with keyless push button start. How do i programa new remote start key fob?
I just bought a dodge 1500. Didn't get the original keyless remote. So I can't add 1 myself?
I have a programmed key but no key fob. Will this method work if I follow these steps with an unprogrammed fob?
Will this work on 09 dodge avenger?
I have a 2012 Dodge Durango SXT n my only keyless remote just unprogramed cause my wife changed the battery in it...what can I do to reprogram it again? I need all the help...
Hello what if i domt have an existing remote is there any way i can program a new one without it?
If I had a working fob,I wouldn't need a fucking new one
2004 Dodge 2500. I lost my original key-less remote so I can't simply add one to it. How do you set up a new remote?
Call a locksmith.They are much cheaper than the dealer.
still need help programming a new key without an existing one?
@@jesusnavarro5456 Yes sir I do 2003 Durango and I have no working remote but I have a new one.
@@randydriggers6757 You can either hire a locksmith to program it for you or you can buy a programmer online.
check this link out for the right product for your vehicle.www.dormanhdsolutions.com/p-21699-99164.aspx?year=2003&make=Dodge&model=Durango&parttype=Key%2520Fob&origin=YMM
They don't sell it but you can buy it off of Amazon for 45 dollars, or ask around and see if a locksmith will program it for less then the 45. If you order it online just follow the instructions on the packaging and you should be set
I actually didn't need my old remote to set this one up... I will try and post a video this week on how to do it. Please check for it and comment if I can help you further..
1999 Dodge Ram Van 3500. Fob does not have a panic button, just lock and unlock. I have one working remote and one I just bought that I need to program. Can it be done if neither fob has a panic button?
What if I dont have the original fob? I have a fob i bought but it doesnt have a panic button. Will this still work?
I have a question for you. I have a working remote. But when I try to put it in programming mode it will not do it. Or at least I don't hear a chime. SO I can't go any farther so far. Any advise?
same same same same fk chrysler Corp and their incompetence
my Dodge Dakota 2001 didn't had a keyless remote so what do I do
Can this work for newer models like 2013
Does this work for a 2013 Dodge Grand Caravan ... please help!
I got a 97 dakota it has no panic button it just has lock n unlock. Any idea how to help
will this work for an '09 Ram?
what can I do to get a different key fob because I think someone is tampering with my vehicle when I know the day before it's has been locked the next morning to get into the vehicle it's unlocked knowing I've locked the day before.
How would u program one if the current one is not working
What happens if you don't have a working remote? Can you still program it or do you need to go to a dealer?
My question exactly 😅
Did y’all ever find out. I have this same question.
I have the exact model. And only the panic button works. But the lock and unlock doesn't work. How do I program another one?
Will these instruction work on a 98 dodge stratus
Will this method work on a 2018 Dodge Ram 1500 eco diesel ???? Thanks
I have one key with remote, it doesn’t have panic button (lock-unlock-trunk), the new key has panic button, is there a way I can program the new key?
I am trying this on a 2005 Dodge Grand Caravan and I just can’t seem to get it into programming mode. The keyfob and the key are one piece. I’m turning the key to Run, waiting for the dinging to stop, holding Unlock to the count of six, press and release Panic and then unlock and I just can’t get that red light to come on. What am I doing wrong?
What about if you lost your original one. An you are trying to set a new one
2003 Dodge Grand Caravan. Followed the instructions with an old (programed) and a new FOB. The new one works, the old one doesn't. I tried to reprogram the old FOB, and then the new one again within 30 secs, but only the new one continues to work. Also, no chimes after the first time when the new FOB was programed.
Make sure the battery is in good condition. Even if it was replaced recently, the battery maybe old and have a poor charge.
Is there a way to remove keys that have been activated in the past that we dont have anymore?
2010 dodge ram 1500 how can I program a remote control
Chat can you let me know if it works for a 1999 Dodge Ram
I have an 'o9 Patriot with one original working combination ignition Key / remote entry. I see in the video that you have a separate key and remote-entry fob. Will this method work for a Dodge/Jeep key like mine which has the cut key shaft attached to the electronic remote lock and unlock fob? My key has three buttons: lock, unlock, and panic.
If it's the same remote as this, then the procedure is in the video description ruclips.net/video/KL7vrANXhkM/видео.html. Don't forget to subscribe!
My key is worn can I just cut a new key? Or does the key need some kindbof programming
Where can I get new key fob for 2004 jeep grand Cherokee limited edition? Will any I order off eBay work?
Will this work on a 2001 jeep XJ Cherokee?
Doesn't work for 2001 dodge 1500 van. There is no panic button on the remote, only lock and unlock
I have a car key, a Dodge Avenger, 2014 model year. The key turns the car engine. But the Remont does not operate the battery. New is the way to program the Raymont Dodge Avenger
Once I use my existing key fob to enter program mode is it true that you’ll have to re-add the original key fob to the program as well once any additional key fobs are programmed?
Add them both at the same time. It doesn't sound like either is original to the vehicle.