Radiomaster pocket crash course: How to setup and bind?
HTML-код
- Опубликовано: 28 авг 2024
- Just a quick guide of how to use the pocket and a brief introduction of the basic functions, this series will come in many short tutorials.
Looking for lipos? Check out CNHL (Affiliated but no extra cost for you) chinahobbyline...
Want to support me? I am running this channel fully self funded and it is a LOT of work, so if you feel like want to support my channel to keep me going? Please subscribe and hit the like button Or please buy me a coffee! Thanks in advance!
bmc.link/iflyx...
Thank you! I could not figure out how to get into turtle mode on my Meteor85! I really appreciate the video! 😁👍
Glad this helps! Happy flying
Thank you. This is helpful. Will be referencing this again shortly.
My friend! Great videos, the first two videos I’ve watched have been targeted to exactly what I need down to the exact components etc. usually when I search on RUclips, I get some video that might brush upon the topic I’m searching for, but yours have been very precise, and I appreciate your detail and the fact that you are helping us beginners out!
Glad that this is helpful to you!!! Good to know the video is hitting the spot
Great video!!
Glad you enjoyed it
I’ve got the CC2500 version & trying to bind to a Cinebee which has FRSKY XM+.. What is this on the Pocket .. I heard it’s FRSKY X2.. is this right .. Thanks for the tutorial 😀👍
Hi I have that radio ELRS VERSION. I want to bind three different quads. How do I do this without losing the one already binded? I only have the mobula 8 binded I want to add the tiny hawk 3 FS. Please help me
How to reset all setup
Are there programmable buttons/switches for this one?
*Im completely new to the hobbie pls give some pointers
Yes, most of the switches on top are customizable
hello, only the auxiliary does not work on my cineape 25 drone, what can I do, I have the same remote control?
the remote has paired with the drone and only the joysticks work, it shows in the betaflight program
ruclips.net/video/YW0AQgA9V6E/видео.html
Here is a setup guide, your welcome
@@iFLYXWings6589 thx
Hi, I found in your hand a Meteor6x , but in BF doesn't show the Binding option. Can you check if the Meteor65Pro has the biding feature inside betaflight please?
The Meteor 65 Pro has a serial based ERLS receiver, which you wont see the binding feature in BF.
For the binding process, please review below video
ruclips.net/video/6FOKzKZ34sg/видео.html
Is beta flight optional because I’m going to buy that and get a humming bird v3 from new bee drone and idk if it has the plug or not?
Betaflight is mainly the programing software for your flight controller and does not have direct relation to the radio.
I got a problem I tried setting up my controller but my ExpressLRS is not loading I think I left it for 10 minutes, and it was still loading what to do? I got the ERLS version built in. i also changed the Internal RF to CRSF and its still not loading
Go to models tabs make sure you only enable internal RF, external RF turn off
@@iFLYXWings6589 I have it off and it doesnt work still
@filipszachniewicz9776 I am having the exact problem. I left it loading overnight and still no luck. Did you find a fix for it?
Hi can you pls do a tutorial with the cc2500 version
I will keep this in mind, if i have a chance i will do it
I have been wondering if it works with any ELRS receiver?
Generally yes. You will need 2.4G receivers by default
@@iFLYXWings6589 so any Radiomaster receiver will work?
@@pyl19 You need ELRS RX that says 2.4G on the back. Radiomaster is only one of the brands.
I got my controller connected to my drone. How do I install beta light configurator on a Chromebook.
Good question, i dont own a chrome book so i dont know the exact answer, but since its a chromebook, my assuming is that you will be able to use android app? If so, try downloading the speedybee app, you will be able to make some tweaks off it. It is kinda like betaflight.
where you enter the binding phrase
You need to go to ELRS LUA script - Enable Wifi - Connect via PC - A Webpage will pop out for you to enter the binding Phrase
what if it doesnt leave the loading screen?
Your either do not have ELRS LUA script install correctly, or you enable the incorrect module (Internal/EXternal). These are the things i can think of for now
Then you bought cc2500 Version