Carpet cleaning company came through my place with this ancient looking beast and it pulled about 2lbs of fine dust out of my carpets before they steam cleaned it, simply amazing!
My CMS 2000 cost me $1000 in 1993 and it is still working well with no major repairs ever required. It would have cost me approx $200 for service and replacement of belt and hose - the suction of dirt and sand out of old flattened carpets is amazing. The carpets have always looked better than when we moved in with pile lifted.
My Grandparents were Amway dealers back in the 90’s. They purchased the ClearTrak when it first came out. This machine is still used weekly nearly 30 years later with proper care and maintenance. I have taken their machine to other people’s homes and pulled out mass amounts of fine dust and debris. Sometimes I forget it works so well until I take to to another home with a box box store branded vacuum cleaner. One modification I made from a video I saw on here from Ron Werner, put some weatherstripping around the filter tray where it slides into the body of the vacuum. I found the filtration to be much better. Long hair used to slip between the plastics and get caught in the exhaust. That does not happen anymore.
How’d you do this? Can you upload a picture of what you mean? I’ve never found hair in their before, I’m the filter tray yes but not the motor air way under the tray.
Thanks for the great demo and commentary. Fyi, the little white filters below the black sponge filter is in fact a HEPA filter. Responding to your comment (approx 19:00) "...lack of HEPA filtration...". Have used these for decades & love them. Easily the best vacuum we've ever owned.
Also the CMS comes with an optional helmet that stores 2 tools, I use it for the dusting brush and the crevice tool. Also the white filter is a HEPA filter.
It’s about time we had these back in the uk. We had them for a very very short period and were sold through kleeneze, that was many years ago, I’ve tried to get one sent over from WMJ but no luck they don’t even respond to my emails. They have never once replied to me, I use an American 110 volt vacuum in my house most of the time ( we have dual voltage in our house 120 volt and 240 volt ) the brushrolls on American vacuums are so much better and you have a better selection of vacuums over there, we hardly ever see canisters with powerheads over here and I really like them, but I really want a workhorse
It's a great machine, and I agree that canisters with powerheads tend to clean carpeting much better than models without. I hope you're able to get a Workhorse someday!
@@VacTech1 just bought myself the new UK shark canister vacuum with duo powerhead, it’s not bad but it’s not great, still think the workhorse would do better in my house. I can keep dreaming though, still no response from Cleartrak about me buying one and having it shipped it over, Think it’s left to me trawling Ebay now and finding someone to ship it over, Hows yours going
@@davedebang-bang6168 still works like the day I bought it! Just have to perform occasional maintenance on it. Good luck, I hope you're able to get one someday!
@@VacTech1 awesome. Not many machines nowadays that you can say that about, I’m gonna hound them some more and make some late night calls I think, well it will be late night for me here in the uk lol
@@davedebang-bang6168 you may want to try joining a vacuum forum/group, pretty sure someone would be more than willing to send a Workhorse Cleartrak off to the UK to you. May have to forward the cash to buy it and have it shipped, though it may be a bit expensive, probably will be a good investment since it’s a proven design that’s been out for awhile along with good performance on dirt and dust pickup. Not sure these aren’t sold in the UK, more than likely was something to do with the beef they had with Dyson many years ago along with it not looking as posh and modern since the design of this is from the mid 80’s, though someone like me probably cares more about the reliability and durability than the look/styling since reliability and durability are the most important factors in anything really.
Owning both machines, I'd take the Workhorse or ClearTrak (same machine) over any Thunder. They're better made, more simpler to take apart and repair, cleans better, energy efficient, and I like that they're made in the USA. The only thing I do like better about the Thunder is having a filter after the motor. But the first defense should be before the motor. Thunders don't have premotor filters. There is however a motor suppressor filter on the Workhorse that the Thunders don't have which makes it kinda forgiving. Just keep in mind that it doesn't have HEPA filtration if you have severe allergies.
@@panasonicvac4036You can also get parts for the Workhorse, where as parts for the Fantoms are extinct now. Yes the Workhorse is made in the USA, whereas the Fantoms are made in Canada.
I love my Workhorse vacuum, however I am having an issue with it being clogged up and I can't find anything on how to take it apart to unclog it. Any help would be appreciated.
There's a few spots to check. Check the base (hose and the brushroll area), remove the rug/floor dial and make sure that area is clear as well. Remove the cyclone (twists and drops down), and make sure the air inlets for the cyclone are clear. Lastly, check the two pre-motor filters. Wash the sponge filter, and the white filter can be vacuumed off or replaced. I hope this helps!
@@vacuumsensation I've had it for years, and got it from a vac shop. You can buy similar brushes from online vac shops, and it's a just generic tool. Just make sure the fitting is 1 1/4" (the right size for the Workhorse wands).
Thanks! Yes, I'm glad I bought new, but it sounds like their refurbs are top notch too. I imagine both would work identically. I can't remember if the new one comes with a longer warranty, and if it does, it may be worth the extra investment.
With all the hype I've heard about this vacuum from other carpet cleaners I'm a little surprised it got the Silver vs. the Gold rating from the CRI. Although I believe their actual test don't really represent real world cleaning so I'm not sure I'd make much of that Silver rating. You really cannot test in a lab what cleaners run into on a daily basis. I'd place more stock in what a number of cleaners who've actually used it more than a year have said than what someone in a lab said after maybe a few hours of testing in totally unreal circumstances.
I like both, but Sebo makes some of the best vacuums available. I would say sebo products are built better, filter better, and (generally) clean carpet better, but they're also more expensive. I like bagless, and use my workhorse more than my sebo, but sebo is a great brand.
Well, it's very different than those. Remember this is a very early bagless design. I would say it cleans carpeting much better than the DC33, but doesn't vibrate the carpet quite as well as Ball Animal 2, but grooms far better. Thanks for watching!
I would say that it is better than both. The DC33 has good parts, but carpet cleaning is not one of them. The overall design of the passages of the DC33 makes it a good canister and excellent at filtering fine dirt with the cyclones, but it lacks in performance in upright mode. The biggest difference between the Dyson Ball Animal 2 and the Workhorse is that the Workhorse rarely breaks and is meant to be repaired if it does. The Dyson Ball models are notorious for breaking and are basically meant to be trashed when they inevitably do break. On top of that, their cleaning performance is pretty mediocre.
Hey Sir, I do apt. Rental turn overs. Paint/ Clean .Currently have 2 Kirby G6's . Would You Say This is a better machine for my Situation ? I Truly Appreciate Your Videos and Your Opinion. Thank You .
Hard to say. When working properly, the Kirby G6 is a better carpet cleaner. However if you want something bagless, something with a hose on-board, and don't mind the filter maintenance that comes with bagless (as opposed to changing a bag), I think you'll really like the Workhorse.
@@VacTech1 Thanks A lot for responding, I appreciate it. A Vac Shop Guy I deal with is closing, He has a nice one that he serviced, but has been in his shop for over a year. Told me yesterday, $150. for it, with a bunch of filters . Im gonna grab it . Cant hurt I figure. Thanks Again. Merry Christmas !!!
@@1painter4hire that's a great deal! Merry Christmas as well, and I hope you enjoy it! Make sure you have the dial on the side set correctly for carpets or tools when you use it. A couple times I've had it on the wrong setting.
Kirby is By far a better cleaner 132 cubic feet per minute and 30 inches of lift.. Blows these plastic junk vac away .. So tell me how much air flow ?? Guarantee it is not 50 % that of Kirby ..The King of all vacuums 😂
@@christhevancura9113 the Kirby is a better carpet cleaner, but both machines have their pros and cons. The Workhorse is one of the best cleaning bagless vacuums around.
Carpet cleaning company came through my place with this ancient looking beast and it pulled about 2lbs of fine dust out of my carpets before they steam cleaned it, simply amazing!
My CMS 2000 cost me $1000 in 1993 and it is still working well with no major repairs ever required. It would have cost me approx $200 for service and replacement of belt and hose - the suction of dirt and sand out of old flattened carpets is amazing. The carpets have always looked better than when we moved in with pile lifted.
My Grandparents were Amway dealers back in the 90’s. They purchased the ClearTrak when it first came out. This machine is still used weekly nearly 30 years later with proper care and maintenance. I have taken their machine to other people’s homes and pulled out mass amounts of fine dust and debris. Sometimes I forget it works so well until I take to to another home with a box box store branded vacuum cleaner.
One modification I made from a video I saw on here from Ron Werner, put some weatherstripping around the filter tray where it slides into the body of the vacuum. I found the filtration to be much better. Long hair used to slip between the plastics and get caught in the exhaust. That does not happen anymore.
Glad to hear theirs is still working well! I'll keep that tip in mind regarding improving the filter gasket. Thanks for watching!
How’d you do this? Can you upload a picture of what you mean? I’ve never found hair in their before, I’m the filter tray yes but not the motor air way under the tray.
@@JoshSmith-ek5gk ruclips.net/video/v72ma8mJerg/видео.html
This is a good vacuum cleaner
Glad they are more popular than ever
Thanks for the great demo and commentary. Fyi, the little white filters below the black sponge filter is in fact a HEPA filter. Responding to your comment (approx 19:00) "...lack of HEPA filtration...". Have used these for decades & love them. Easily the best vacuum we've ever owned.
Best vacuum cleaner I have ever used! Wish I could buy another one in Australia. My $1200 Dyson is useless.
That was fascinating! I can't believe that a forty year old design is still on sale. Well, I can, because... America.
Would love to own one of these
You can also press the foot release again to make it go even lower, helps get under beds really well.
Also the CMS comes with an optional helmet that stores 2 tools, I use it for the dusting brush and the crevice tool. Also the white filter is a HEPA filter.
@@JoshSmith-ek5gk The white filter is not a HEPA filter.
This is an excellent in depth review. Thank you for sharing
If I had to guess, I am pretty sure these have Ametek Lamb motors in them. This is based off of how it sounds.
It’s sounds like a fantom thunder with a good motor
It’s about time we had these back in the uk. We had them for a very very short period and were sold through kleeneze, that was many years ago, I’ve tried to get one sent over from WMJ but no luck they don’t even respond to my emails. They have never once replied to me, I use an American 110 volt vacuum in my house most of the time ( we have dual voltage in our house 120 volt and 240 volt ) the brushrolls on American vacuums are so much better and you have a better selection of vacuums over there, we hardly ever see canisters with powerheads over here and I really like them, but I really want a workhorse
It's a great machine, and I agree that canisters with powerheads tend to clean carpeting much better than models without. I hope you're able to get a Workhorse someday!
@@VacTech1 just bought myself the new UK shark canister vacuum with duo powerhead, it’s not bad but it’s not great, still think the workhorse would do better in my house. I can keep dreaming though, still no response from Cleartrak about me buying one and having it shipped it over, Think it’s left to me trawling Ebay now and finding someone to ship it over, Hows yours going
@@davedebang-bang6168 still works like the day I bought it! Just have to perform occasional maintenance on it. Good luck, I hope you're able to get one someday!
@@VacTech1 awesome. Not many machines nowadays that you can say that about, I’m gonna hound them some more and make some late night calls I think, well it will be late night for me here in the uk lol
@@davedebang-bang6168 you may want to try joining a vacuum forum/group, pretty sure someone would be more than willing to send a Workhorse Cleartrak off to the UK to you. May have to forward the cash to buy it and have it shipped, though it may be a bit expensive, probably will be a good investment since it’s a proven design that’s been out for awhile along with good performance on dirt and dust pickup. Not sure these aren’t sold in the UK, more than likely was something to do with the beef they had with Dyson many years ago along with it not looking as posh and modern since the design of this is from the mid 80’s, though someone like me probably cares more about the reliability and durability than the look/styling since reliability and durability are the most important factors in anything really.
Where can I buy one and does it come with the extra attachments or do I have to pay separately?
Workhorse sells the machine directly on their website, cleartrak.com. The tool kit is an extra option they offer.
@@VacTech1 thank you for your reply 🙏🏻
Loved the demo 😍
I could give one of these a try. How does this thing compare to the Fantom Thunder?
Owning both machines, I'd take the Workhorse or ClearTrak (same machine) over any Thunder. They're better made, more simpler to take apart and repair, cleans better, energy efficient, and I like that they're made in the USA. The only thing I do like better about the Thunder is having a filter after the motor. But the first defense should be before the motor. Thunders don't have premotor filters. There is however a motor suppressor filter on the Workhorse that the Thunders don't have which makes it kinda forgiving. Just keep in mind that it doesn't have HEPA filtration if you have severe allergies.
@@panasonicvac4036You can also get parts for the Workhorse, where as parts for the Fantoms are extinct now. Yes the Workhorse is made in the USA, whereas the Fantoms are made in Canada.
Hey, how would you compare the work horse to a Kirby?
I love my Workhorse vacuum, however I am having an issue with it being clogged up and I can't find anything on how to take it apart to unclog it. Any help would be appreciated.
There's a few spots to check. Check the base (hose and the brushroll area), remove the rug/floor dial and make sure that area is clear as well. Remove the cyclone (twists and drops down), and make sure the air inlets for the cyclone are clear. Lastly, check the two pre-motor filters. Wash the sponge filter, and the white filter can be vacuumed off or replaced. I hope this helps!
Can you tell me the weight of this? I currently use cordless vacuums simply due to my modern day Dyson being too heavy.
Back filter is missing where can I get a replacement? New Zealand
They have a website, cleartrak.com. I’m not sure they ship internationally, but they carry all the replacement parts.
I have been waiting for this Thank you!! 😍😘😁😁 I want one so bad 😁😁
Thanks for watching!
Question at 17:08 Where do you buy the bare floor soft brush tool? I don’t see it in the clear track shop.
@@vacuumsensation I've had it for years, and got it from a vac shop. You can buy similar brushes from online vac shops, and it's a just generic tool. Just make sure the fitting is 1 1/4" (the right size for the Workhorse wands).
Vac Tech Thank you for the reply 👍
Would you recommend the new workhorse for $100 more than the refurbished one? Great informative video.
Thanks! Yes, I'm glad I bought new, but it sounds like their refurbs are top notch too. I imagine both would work identically. I can't remember if the new one comes with a longer warranty, and if it does, it may be worth the extra investment.
you can smooth out those bubbles on the sticker with a credit card
I'll give that a shot!
very good video thanks
Thanks I appreciate it!
With all the hype I've heard about this vacuum from other carpet cleaners I'm a little surprised it got the Silver vs. the Gold rating from the CRI. Although I believe their actual test don't really represent real world cleaning so I'm not sure I'd make much of that Silver rating. You really cannot test in a lab what cleaners run into on a daily basis. I'd place more stock in what a number of cleaners who've actually used it more than a year have said than what someone in a lab said after maybe a few hours of testing in totally unreal circumstances.
Was given one have no idea how to use it...help please
Sure, what would you like to know? Did you see how to operate and empty it in the video? I also go over how to tune it up.
@@VacTech1 yes and I am missing the filter piece at the back of the vac
@@donnacassidy2993 I see! You can order spare parts from their website, cleartrak.com. You’ll need that filter piece for the vacuum to work.
Love your video. I love this kind of vacuum.
Thanks for watching!
How is this compared to Sebo vacuum?
I like both, but Sebo makes some of the best vacuums available. I would say sebo products are built better, filter better, and (generally) clean carpet better, but they're also more expensive. I like bagless, and use my workhorse more than my sebo, but sebo is a great brand.
How does the Workhorse compare to the Dyson DC33 & Dyson Ball Animal 2? I am curious.
Well, it's very different than those. Remember this is a very early bagless design. I would say it cleans carpeting much better than the DC33, but doesn't vibrate the carpet quite as well as Ball Animal 2, but grooms far better. Thanks for watching!
I would say that it is better than both. The DC33 has good parts, but carpet cleaning is not one of them. The overall design of the passages of the DC33 makes it a good canister and excellent at filtering fine dirt with the cyclones, but it lacks in performance in upright mode. The biggest difference between the Dyson Ball Animal 2 and the Workhorse is that the Workhorse rarely breaks and is meant to be repaired if it does. The Dyson Ball models are notorious for breaking and are basically meant to be trashed when they inevitably do break. On top of that, their cleaning performance is pretty mediocre.
What happened to the dc27 vid
I had to make a correction on it. It will be back up shortly!
Vac Tech OK
How's it holding up?
It’s holding up great! Just replace the stretch belt every year or so, and keep the filters and brushroll clean, and it should last for years.
Hey Sir,
I do apt. Rental turn overs. Paint/ Clean .Currently have 2 Kirby G6's . Would You Say This is a better machine for my Situation ? I Truly Appreciate Your Videos and Your Opinion. Thank You .
Hard to say. When working properly, the Kirby G6 is a better carpet cleaner. However if you want something bagless, something with a hose on-board, and don't mind the filter maintenance that comes with bagless (as opposed to changing a bag), I think you'll really like the Workhorse.
@@VacTech1 Thanks A lot for responding, I appreciate it. A Vac Shop Guy I deal with is closing, He has a nice one that he serviced, but has been in his shop for over a year. Told me yesterday, $150. for it, with a bunch of filters . Im gonna grab it . Cant hurt I figure. Thanks Again. Merry Christmas !!!
@@1painter4hire that's a great deal! Merry Christmas as well, and I hope you enjoy it! Make sure you have the dial on the side set correctly for carpets or tools when you use it. A couple times I've had it on the wrong setting.
@@1painter4hire how’d you go? How’d the workhorse compete with the G6?
Do you. Have a fantom in your collection you can make a video of
I have both the Dyson DC33 & Dyson Ball Animal 2. I don’t have the Workhorse.
Should try one! They wipe the floor with Dyson’s! No pun intended 😅
great video!
Thanks!
If John Mayer did Vaccum reviews
Awesome vacuum. If only the sebo automatic would dig into carpets more like this vac.
Let me guess lamb motor in it
Is that a good or bad thing?
@@kimberlybrookes5844 It is a good thing. Many high-end vacuum cleaners over the years have used Lamb/Ametek motors.
At least it's made in America
It's always appreciated!
Ours is a cms
It has no HEPA?
So all the small bits get flown all over the room? LMAO
Kirby is
By far a better cleaner 132 cubic feet per minute and 30 inches of lift.. Blows these plastic junk vac away .. So tell me how much air flow ?? Guarantee it is not 50 % that of Kirby ..The King of all vacuums 😂
@@christhevancura9113 the Kirby is a better carpet cleaner, but both machines have their pros and cons. The Workhorse is one of the best cleaning bagless vacuums around.
Lol it looks like a Fantom capture