Hey dude you earned a sub. I've been hearing great things about Siemitsu levers, especially ls-40. But then i realized it's extremely rare and hard to get with the old Panasonic switches FML. Thank you for this DIY solution, I'll try something like this 😀👌
@@mr.arcadefox8782 I've recently found that the Hori EX2 and the Tekken 6 Hori Wireless Fightstick both use AM51630's in the lever. I took apart the levers and now I have a few pairs.
Removing the hinge and using it as just the switch I think it would feel amazing honestly. I’ve not tried it in a JLF or JLX but I can only imagine it feeling great!
@@mr.arcadefox8782So, tried the Gesungs without the hinge, they were a bit to heavy at 180g. With this mod, I’ve learned that I’m an enjoyer of lighter switches.
The main dilemma you run across is Panasonic Switches levers are shaped differently than a Gersung switch. The lever slot is way further back. You wouldn’t be able to use the Gersung long lever cause it would be too short and could cause activation issues if used in a stick that needed a long lever switch. However if you had broken blood Diamond switches you could take the long lever from there and use it on the new switch.
@@mr.arcadefox8782 Thanks for the reply! Bit of shame then but I guess that would have been too easy. Might still give this mod try and see how the smaller levers feel
@@mr.arcadefox8782 I was able to do this mod yesterday thanks to your video. I got a slightly different model AM5s with the normal size switch levers for Korean levers. I'm so happy with them as they feel far more satisfying to click and activate than just the normal A3 switches. Thank you again for your guide ❤️
Thank you 🤗 Hypothetically yes… HOWEVER… you would need long Panasonic AM5 hinges because any other long hinge is not compatible. Could be an alternative to dead standard blood diamond switches to swap the long hinge.
Hey dude you earned a sub. I've been hearing great things about Siemitsu levers, especially ls-40.
But then i realized it's extremely rare and hard to get with the old Panasonic switches FML.
Thank you for this DIY solution, I'll try something like this 😀👌
I’m so happy to hear that! Thank you so much for the support! 🤗💪🏻🦊
Way more 'anatomy' than I was expecting 🤣
Bwahahah!!! I had to 😜🤣
Had to walk away listing to this at work on my blutooth, I was cracking up so hard my coworkers were getting worried lol!
I’m so happy my videos can have that effect 🥳 Thank you for your support 🤗
Hey Fox, I've also read about Short Hinge A5s. Do you know what pair of switches I need for it? Thanks
I am not familiar with the OMRON A5 switches unfortunately 🥺
How do I find the lever for the switch bought some one on switches but I don’t have the lever henge?
Try checking in some Fightstick discords. They have buy and sell areas you can connect with people that might have them.
How valuable are these blood diamond switches?
I’ve seen genuine Blood Diamond switches sell for $50 a switch NEW on the second hand market. Used for $25 to $30 a switch.
@@mr.arcadefox8782 wow. I have some, but they are attached to my K sticks lol.
@@mr.arcadefox8782 I've recently found that the Hori EX2 and the Tekken 6 Hori Wireless Fightstick both use AM51630's in the lever. I took apart the levers and now I have a few pairs.
Would you say this is a good switch mod for a JLF + Shuriken V2?
Removing the hinge and using it as just the switch I think it would feel amazing honestly. I’ve not tried it in a JLF or JLX but I can only imagine it feeling great!
Alrighty, will try that!
I would love your thoughts on it! Keep me posted on what you think!
@@mr.arcadefox8782So, tried the Gesungs without the hinge, they were a bit to heavy at 180g. With this mod, I’ve learned that I’m an enjoyer of lighter switches.
@Playa-V Everyone has different preferences for sure! Nothing wrong with enjoying a lighter switch.
He's back
Can you use the longer hinge from the A3? Wouldn't it feel different using the shorter hinge/activator on the A5? Great video!
The main dilemma you run across is Panasonic Switches levers are shaped differently than a Gersung switch. The lever slot is way further back. You wouldn’t be able to use the Gersung long lever cause it would be too short and could cause activation issues if used in a stick that needed a long lever switch. However if you had broken blood Diamond switches you could take the long lever from there and use it on the new switch.
@@mr.arcadefox8782 Thanks for the reply! Bit of shame then but I guess that would have been too easy. Might still give this mod try and see how the smaller levers feel
Awesome! Let me know how you like them! ALSO!!! Thank you for your support! 🤗🦊👍🏻👍🏻
@@mr.arcadefox8782 I was able to do this mod yesterday thanks to your video. I got a slightly different model AM5s with the normal size switch levers for Korean levers. I'm so happy with them as they feel far more satisfying to click and activate than just the normal A3 switches.
Thank you again for your guide ❤️
YAY!!! I’m so happy it helped you out! That’s great!!! ❤️💪🏻🦊👍🏻
Can you do this mod with a sanjuks v6? Great video by the way.
Thank you 🤗 Hypothetically yes… HOWEVER… you would need long Panasonic AM5 hinges because any other long hinge is not compatible. Could be an alternative to dead standard blood diamond switches to swap the long hinge.
@@mr.arcadefox8782 ahhh I think I have them just found out I have 20 am51652c5n and looking at the sanjuk v6 to try.
do you know durability of Panasonic AM5??
I don’t know the specific numbers but from experience they are a reliable switch.
i'm using am5 since 2015 and still works fine since first day