HOW TO GULLWING YOUR VAN
HTML-код
- Опубликовано: 2 июл 2024
- In this video we show you how we converted our slider door to a gullwing door.
THERE WHERE MANY QUESTIONS ABOUT THE HINGES ON THE INSIDE OF THE BODY.
we made a video explaining this further.
You can check that out here:
• THE MISSING HINGE // G...
The products I used:
Struds 400N each:
www.gasveerwinkel.nl/product/...
Hinges:
www.ebay.com/itm/254349425569
Bottom mount 2x:
www.gasveerwinkel.nl/product/...
Top mount 2x:
www.gasveerwinkel.nl/product/... 
Авто/Мото
Great video Sir.
Hey bud. Must have watched this video 20 times. Thanks to this video we were able to make our VW LT28 sliding door into a gull wing door. We made a quick video as LT enthusiast were asking. We also put your video in our caption. Thanks again.
That's awesome man! Glad i could help. If you post your link here I'll pin it! cheers!
That's great, I have lt31 and I want to do same thing,where can I see the video.thanks
@@ristoivanovski1 ruclips.net/video/H230_iETMXk/видео.html
@@Brochachichoppers ruclips.net/video/H230_iETMXk/видео.html
I am doing this IN 1/24th scale guys!! Thanks for the info!
Awesome! Send us a pic through our social media channels when it's finished. Really curious how it's gonna turn out!
Blij dat ik jullie gevonden heb. Zeer duidelijke uitleg. Daar heb ik wat aan. Ik ben zelf eigenaar van een gmc vandura tbi 1990. En heb uiteraard ook wat probleempje. Maar dankzij jullie duidelijke uitleg weet ik nu hoe ik de bus kan uitlezen. Dank daar voor. Ik blijf jullie zeker volgen. Gr uit het mooie zeeland
Leuk om te horen, Erik!
Als je nog ideeën hebt voor video's horen we het graag!
Beautiful door bro, eventually I want to take a bus and split the door in half like a jet, and make the bottom half, the steps to get in, and the top half polycarbonate, to use it as a window 😎👍🏼
That would be really dope!
Really good video. I’ve a Bedford rascal that I keep thinking about doing the same.
What’s keeping you from doing it?
Classic, I'm here because st90 carry van.
Highlight: Sergio screeches onto the sidewalk to save the day (2-man job.)
Takeaways: Don't listen to your angle grinder; Always do the safety squint (Safety 3rd.)
You got it!
Been looking for a video on this subject for a while...
Hello 👋
Nice job. That makes me rethink a sliding door van.
Thank you I'm so glad somebody else had the same idea that I did this is exactly what I want to do
Love your idea and instulation in the van!
Awesome video man.
Thank you so much. I genuinely appreciate this.
Thank you, Thomas!
This is so cool!!
I totally dig this, sure beats my piece of shit sliding mechanism that's been broke for over a year now. But I don't have any of the tools to do this. So this will remain a funny fantasy for me.
Thanks man! Best advice i can give is buy those tools.. don't have to be expensive ones, but just enough so you can learn it yourself. I started out like that as well. You're never too old to learn✌🏻
@@Brochachichoppers While I agree with you, I definitely don't have the money for that bending metal contraption you've got. It's far less expensive and time consuming for me to find a shop that can do it.
Sick man that's so cool
Wow!!! You made it look so easy. Seems alignment of the door to set the hinges is obviously most critical. Could you place hinges before you remove the door to ensure perfect alignment? (That would mean the hinges would have to be mounted inward.,opposite of the way you did).
Great mod to the side door!
Thank you. Been looking forward to this upload
I want to make my side sliding door open like a normal car door..
Gonna put some heavy duty hinges down one side of the door..
(The locking mechanism is on the other so should still work okay)
That would be really cool! Keep us posted if you do, I’d like to see the result!
Nice video. Would you be able to do that on my 1980 Chev G30van?
Love this video. It's right to the point.
My problem with this design, is that if a car is parked too close, I can't open my door.😢 is there a hinge design that would allow the door to pop out a bit, then slide up, with a similar motion as when it slides to the side???
Please make a video or send a link for some hinge designs that would make that possible.
You're talking about a Tesla style gullwing, which will take way more fabricating. The gullwing isn't very practical in crowded parking lots but it'll definitely get people's attention and probably a conversation or two.
Great video on how you shaped the hinges. What length are the struts you used and how much weight can each handle.
Hi Phil, thanks for watching!
The struts are 900mm(35,5") long with a stroke of 400mm(15-3/4") they each have a capacity of 400n
Hey brothers, great show!!!!did the white blocks in the door jam( alignment blocks) come from the factory??? And do you do anything to secure the bottom of the door for seal and to relieve the weight pressure on the door or just the factory door guide blocks??????
The guide blocks were in this originally. We did mount a temporary gate style slide latch on the inside to keep the door from rattling, but still working on a temp solution which will work with the original lock and handle
The ending is awesome.
Thanks for the upload because I have 1977 and most vandura vids are 80's-90s
I converted my 3rd gen E350 to dually so this is a must. I am gonna attempt to use hood hinges and springs from a Ford truck since I have them in spades. If it does not work well I'll come back and kiss ass 😄😄
I have double cargo doors on the side. I want to weld them together and cut them in the lower third, so the smaller lower section will open like a tailgate and the top bigger section will open up like gullwing so I can side on the tailgate section. I need help?
I want to do gullwings on a car of mine, but I can't figure out the weathering side of things...overhead doors gonna need some rain channels and stuff. How does the van handle the rain?
thats supercool, do you think i could take my barn doors and scrap em and then find a junkyard gullwing in do this?
Definitely! The gullwing will be 1/4inch too wide but you can cut a little bit of the edge and make it fit
I have a question where do I buy the original hinges so I can put it on a 2000 Impala
I want to to a 05 Honda Odyssey touring
Gullwing the sliders im having a lot of problems with electrical locks and cables
Nice man. Thinking about doing that to mine
And this works on any vehicle? Im thinkin bout doin this to a square body s10 blazer
Did you do anything to the latch?
Love the video. How long are the struts?
Thank you! The struts are 850mm(app. 34inches) total length with a stroke of 400mm(app. 16inches)
How does it latch shut?
Does the door still latch the same?
I like this idea. Gonna do it on my 1992 Dodge Caravan. What did you end up doing for a door latch? I was thinking of getting a rear hatch door off another minivan and using the latch off that, but if you have a better idea, I'm all ears.
I planned on taking a latch out of a suburban tailgate. But never got to it and probably never will
Hey man this is great! What’s the length of the gas strut?
I’m not sure about the total length but the stroke is 15-3/4” (or 400mm)
Hey mate, can the same method be followed on a VW Citi golf rear doors?
Please advice.
Nice vid.
From South Africa
Hey man, thanks for watching!
I don't know the specific details on the door and gutter, but the principle described in my video will work with every other make/model car.
@@Brochachichoppers Noted with thanks brother.
What length are your struts??
Dude my buddy in 80s had a g20 van with a gull wing........we hated it.
Very good job new subscriber here keep up the good work I also have a g20 and a chevy k5 jimmy square body great minds think alike
Yeah man! Squares and G-series vans are the best. Thanks for subscribing🤙🏻
How did you make the old sliding cover clear when opening door
We notched it on the top side
So badass!
Just don’t take out the car parked next to you
Would you ever consider selling hinges?I have a chevy van and the dimensions should be the same.
We are working on that. Keep an eye on our page for updates
Where did you weld other part of the hinge on the body dripwell
Please refer to our other video, Gullwing part 2. That's where i explain where and how the hinge is mounted on the body
What is the tire/wheel combination at the end of the vid - love the stance and exposure - nice job BTW
They are 10x15 with 265/70R15 in the rear and 8x15 with 245/50R15 in the front
What did you do to the hinge part that mounted on the inside of the door?
Hello, I filmed a video explainijg this, I've had more questions about it, it will be up end of this week
New video about the hinges is uploaded! Check it here:
ruclips.net/video/tvYak1Sadc8/видео.html
Are you using stock door latches and strickers
We've used the rear latch only. In the front i temporarily mounted a bayonet lock to keep the door from rattling. I'll post up a video on more details asap. Thanks for watching!
How do you open it if a car is parked next to you or in your garage ?
You don't obviously lol
Can this be done on a 99 safari GMC van
I have no experience with safari’s but i bet it’ll be just as easy.
How does the door latch work
Im using the original latch, but only cut the front one off
Hallo do have a link where in can buy IT ?
Most parts are linked in the description of the video.
If the part youre looking for isn't there please let me know
Where u located at I need mind done. What the price to do it. Thanks
We are located in the Amsterdam area in the Netherlands
Oh ok. We here USA. A little far from us would u be able to make the hinges mail them to me I’ll pay for it also the shocks.
@@Brochachichoppers or a kit to install it on mind.
Any pictures of hinge mounted to body
We'll be making a followup video with more details about measurements and good view of the hinges. Please keep an eye on our channel✌🏻
@@Brochachichoppers I'm current under build
New video about the hinges is uploaded! Check it here:
ruclips.net/video/tvYak1Sadc8/видео.html
How does the door latch shut
It still uses and operates the rear latch. I deleted the front latch.
Where are u located and how much do you charge to do an 1998 chevy astro
We're in the Netherlands. For inquiries please contact us through our facebook or instagram pages
How does the latch work
Kept the factory latch but Only latches at the rear now
Could I get some hinges
We are currently working on hinge sets to sell. Keep an eye on our Facebook or instagram page for updates
Where are you, geographically? I need this done to my van!!
We're in the Amsterdam area of the Netherlands
Does it leak tho???
No, the original seals still work
how did u lock?
The original latch in the rear still works. I'm currently working on a front latch that will work simultaneously.
Im about to gullwing my 79 g10. What are you doing for latching it? Just the factory?
Hey man, just using the rear latch for now. Still have to figure out a way to lock it good, but haven't gotten to it yet
I need kit part # info
No kit, i ordered all parts separately which are listed in the description. However customvanner.com sells a complete kit which will be similar to this setup
@@Brochachichoppers do you have a picture of where hinges mounted on body you show door Nicky but not body when mounted
joe heeft dat godsakkerss goed veur mekare hor! netjes hoor.
Thanks maat!
those hinges wont last very long with all that weight. id rather use ones made for automotive use as they are more heavy duty than the the wooden door hinges your using other than that very informative
Thanks Paul! At first i was sceptical about these hinges as well. But after seeing other vans running them succesfully for a while it was my best/easiest option.
Also, they're just a couple welds. If it doesn't hold up i can swap out a hinge.
@@Brochachichoppers I can't imagine these hinges ever breaking! I just hope I did a good job welding them!
"...safety squint..."?!?! is that what I heard??
Yes... the most common practice in the angle grinding business