A roll up garage door installed sideways would be a better gate. And takes less space at the corner. Would require a wheel at bottom of gate to roll on floor. Could be motorized or manual.
We are located in Melbourne Australia but if you are located elsewhere then We now sell all our hardware through our distributors www.ssinnovators.com and this allows all other gate companies to fabricate and install our system.
Hi Estrella, We now sell all our hardware through our distributors www.ssinnovators.com and this allows all other gate companies to fabricate and install our system.
Salam Luhar very good tacnic please. Show all parts desine and where it available.if possible please tell appromextly Price .also send me your number so I can contact you
Good night. I made a gate inspired by your model. I would like to put an engine on the gate. Which engine would you recommend? I ask the characteristic technical information, power, these things.
Hi Luis, We now sell all our hardware through our distributors www.ssinnovators.com and this allows all other gate companies to fabricate and install our system. We are in talks with someone in San Francisco that may become a licensee.
Now you can buy the hardware to make the turning gate from:
www.ssinnovators.com
A roll up garage door installed sideways would be a better gate. And takes less space at the corner. Would require a wheel at bottom of gate to roll on floor. Could be motorized or manual.
Really nice job! We are glad to see our Saturn Sliding Gate Operator installed so well!
Oi fabricação
nice
Good tell about courve digree
Is there manufacture here in the philippines
Any gate company can make this gate using our hardware. If you would like further information, head to www.sidcon.au
Is it possible for the collapsible door?
You have music playing . Are these gates noisy and will it annoy the neighbours over time?
Where can i get this dome how much does it cost
We are located in Melbourne Australia but if you are located elsewhere then We now sell all our hardware through our distributors www.ssinnovators.com and this allows all other gate companies to fabricate and install our system.
How long is the radius of the curved bottom rail? Thanks
Do you service in Sanford fl
Hi Estrella,
We now sell all our hardware through our distributors www.ssinnovators.com and this allows all other gate companies to fabricate and install our system.
@@SidconGlobal nice but this was a year ago requesting info
Do you guys create this type of gate in miami?
Wonderful work 👍 great
JOY HENRY बहुतही बडीया
Salam Luhar very good tacnic please. Show all parts desine and where it available.if possible please tell appromextly Price .also send me your number so I can contact you
Very good, congratulations.
Keren
Can you please sell me the layout of this gate?
Namaste, super concept of sliding gate, but how to make locking system to this gate, please tell us about locking system, tq
vanaja kumar : it's reverse of what we normally see. Rollers are on ground and channel moves with gate. There is another video that explains it.
Good night.
I made a gate inspired by your model.
I would like to put an engine on the gate.
Which engine would you recommend? I ask the characteristic technical information, power, these things.
BFT 1000kg any model really,
also set the sliding speed to 50% or lower,
Good Job..!!!.... But I think the speed is not enough for security!!!
That’s the normal speed for all sliding gate motors
Mohon diterangkan, kenapa pagar sliding gate di roboh, sedangkan TDK ada penyangga ditengah,TRIms,
Good job...
good job
I can’t find anyone who can do this in California
Hi Luis,
We now sell all our hardware through our distributors www.ssinnovators.com and this allows all other gate companies to fabricate and install our system.
We are in talks with someone in San Francisco that may become a licensee.
awesome. IP protected?
Very good joss lah
very good
Good job sir I want machine for this gate
2cm snow or little ice and you never open this gate! - sux
жаль, что не для северных регионов..... снег...
Bhai apna number send kr dijiye, mujhe bhi esa banwana hai
👍👍👍
Le ruote sono girevoli se mi puoi rispondere in italiano grazie
Thank you very much all 👍😊
Where can I get blue prints?
Usually you have to buy them from a company or have engineer make you some. U can also buy blue prints off ebay.
Nice, rat cannot in
Check out our latest Turning gate, 3.5 Mts height and turning twice
ruclips.net/video/eNCui8Xltpk/видео.html
TDK roboh
Yb