THANK YOU SO MUCH. i was having a hard time scaling my plates these past few months since i couldn't find any tutorial video with clear explanations, yet i'm so glad I find this
bro thank you so much, i have always found scaling so confusing but you literally just taught me. other youtubers complicate the whole thing, now i hane no issue with scaling on autocad
So, our CAD subject starts next week (Wednesday) I'm just here to see if I can learn some basics before entering a war 😇👌I love your work space, and thanks for the tips on how to scale
Please make a tutorial about perspective points with difficult house models :( Other youtubers are hard to understand but hopefully I'm learning from you :D. I've watched your previous videos and I learned a lot! I am looking forward for your next videos :)
I swear the Layout tab is the bane of my existence. Spent two hours trying to put plans on paper the proper way through layouts. Nothing works. Thank you for showing me it's completely fine to just stick to the Model tab lol
I can help you to do your layout by easy way: if you draw by: Mlm just put the scale in page setup 1/1 Cm 10/1 M 1000/1 then you can change your draw in view port with any scale you want it Ex:( 1/100 or 1/200 ..... etc)
GREAT VIDEO MAN!! I'm still hoping for a video on how to get the proper proportions in perspective :(( but anyways great video and very helpful!!! Flying peace!!!
You're good in sharing tips and techniques to other I salute you bro keep it up God bless and more blessing to come!! Btw incomingarki student ako hehehee
Llyan i can't get my paper size and printable area to match up and i've copied exactly everything you have done. What am i doing wrong? It comes up with paper size: 420 x 297, but prit rea is 410 x 263. If i click fit to paper, underneath comes up with 1mm= 56.46mm automatically? And if i unclick fit to paper and put in scale 1:50 it still comes up with the same margin! So frustrating.
This is a good tutorial video. Ive graduated already. And ive been working as an apprentice. But im so scared to ask our boss about scales. Because honestly. I passed my exams based on nerves only 😂. Ive been figuring out scaling on paper space. .and im not quite sure with the results. .so my drawings is really questionable. .im always scared if my boss would take out his metric scale and measure my prinouts. .these one feels easieeer. . .and looks easier. .❤ its funny but i think this is a very common problem and one of the things arki peeps would search for hahahaha. .including me.
What unit set-up you use when you draw? Is it in meter unit? I see when you draw a straight 8.5x11 size looks too small compare to the bed shown on workspace when in fact the bed sizes is like 2 meters lenght, how can a number 11 is too small compare to number 2, im a bit confuse
Ask question again sir. What if my drawing Units is Mtr. And my drawing is mtr also, Then i want to put my drawing in that same your way to plot it but it is set into mm. How i gonna do that? Tnx!!
In certain occasions it is, like when you need to print just one page. but when doing plans that require repetitive title blocks and pages, using layout is faster:) It just depends on what you're printing.
Dude... please explain about the line weights according to thicknes.. so that we can create our own template for regular and professional use for all the drawings.. coz it is not possible anyone to create every time for each file. Please..
When we print the drawing to the selected paper, the printer adds a margin. This makes the drawing shrink down so that the scale of the drawing ruins. How to correct this?
Hello! I have a problem. Im trying to print out a 1km x 1km site on A3 paper. My model space for this site is 1:1 too. I tried your method to try to put it on an A3 paper (what was required of us in school) but the model is too big for the paper. how do i squeeze it in the a3 paper? i cannot use any other paper sizes since a3 paper is what is required to be used
Hey, bro can u plz help me, how should I keep all new updates like in software, construction techniques, all News related to architecture and construction. Is there any app or any thing to do this
Hi! I have something to ask. I hope you will help. I am using layout in plotting. The bad thing is, having plotted the drawing at my desired size of paper, the preview of the layout in autocad is perfectly on center of the paper. But when I saved and opened it as PDF file, the drawing was off-centered. It was plotted nearly below the left side margin of the paper. Have you experienced this before? Thanks in advance to those who would help.
@@LlyanAustria Yes. Sometimes I use the model space when I print it directly and there's no problem with the margin. But same thing when I saved it as PDF file. :( Maybe I should use an updated version of cad??
Working with buildings I find it convenient to use meters. I'd use mm if I designed small machinery or something. I mean it'd be silly to type 10,000 or 50,000 all the time when that's the kind of input I keep needing.
Sir tinuturo din po ba ang ganyang mga software's sa college? At anong year po mag sisimula pag gamit nyan, manual palang po kasi ako marunong sangayon balak ko pong mag archi next year.
Hi sir llyan 😁 ask ko lang po if you can teach us about Revit kahit basics po.... isa po kase ako sa di alam mag revit at gusto ko matutunan. Thanks po More power po sa channel nyo and thanks po sa lahat nang vids ♥️
Goodmorning sir ask ko lng po sana ma pansin nyo. Practicing Draftsman po ako. Tanong ko lng po. I have a house plan with 10x10 meter Sinubukan ko 1:100 pero sobrang liit na ng drawings. A1 nga pala size ng paper. Sinubukan ko rin po 1:50 halos kalahati rin sa laki. Sana po maka reply kayo. Nga pala. I subscribed to your chanel because of thoes good content. Marami kaming natututunan sa inyo. GOD BLESS!!😄
Good day po. Pano po kung yung dimensions ko sa drawing are in meters.. kailangan ko rin po ba e convert ang dimension example A1 into meters? Print scale po kasi naka lagay lang ay inches or millimeters. Salamat po.
How do I search for information? Whenever I search on Google or RUclips for something, I have something else that does not relate to that thing that I want 😢😢😢
Fantastic little tutorial! But I suggest reducing the level of your background audio a bit, or at least choose a more chill or slower pace music. I found it a little distracting while I was intently listening to your instructions which was a little on the fast side. Regardless, thank you for sharing your knowledge
Llyan Austria It's the paper layout setup. A whole lot easier to scale and text and dimensions are done on paper space so they are consistent throughout all the sheets. None of that being done on the model space. I used to do what you are doing 20 years ago, but I found paper space (layout) text and dimensioning more efficient.
You can scale me anytime in AutoCad baby! ❤️❤️❤️
How about no... haha!
@@LlyanAustria Is it because you want to do it in rl not in AutoCad ?
THANK YOU SO MUCH. i was having a hard time scaling my plates these past few months since i couldn't find any tutorial video with clear explanations, yet i'm so glad I find this
kanina pa akong 7pm naghahanapng ways to properly scale my model and put it on an A3 size paper, sakto yung content mo
Ahhh that's my problem like my whole lifetime. Now I know the techniques. Thanks brother! You're awesome
Glad i could help pal!:)
bro thank you so much, i have always found scaling so confusing but you literally just taught me. other youtubers complicate the whole thing, now i hane no issue with scaling on autocad
Llyan, great and simple way of scaling. Thanks.
Good video! I love Autocad, this is why I created my channel to help more people.
That's great pal!!:) Keep doing what you're doing, you are a big help!
@@LlyanAustria Thanks for good wishes. Hope we can collaborate in the future. You’ll do great!
collab please!
Woah no comments ? Notif squad of arkis squad
Thanks for the tips kuya!!
It will be our topic next sy( our school starts at aug)
Good luck on your autocad classes pal!:)
Thank you sir..direct to the tutorial.. no time wasted👍👍
So, our CAD subject starts next week (Wednesday) I'm just here to see if I can learn some basics before entering a war 😇👌I love your work space, and thanks for the tips on how to scale
Glad i could help!:)
Ohh my Gosh😍😍😍 thank you so much for this I've been struggling on how to plot my cad drawings for months now. Thank you soooooo muuuccchhh😍😍😍
You're welcome!:)
Your way is Great, and really it's fast, it works even if we don't do layout .. Thnx because you gave me new information :)
mas madami pa ata akong natututunan sa youtube eh. hahaha thank you Architect Llyan!
Early!
I clicked your video so fast but the signal is only the hindrance! Another helpful tips! Thank you pal😍
Haha thank you for clicking it even though your signal is lagging haha!:)
@@LlyanAustria of course I will pal!
Please make a tutorial about perspective points with difficult house models :( Other youtubers are hard to understand but hopefully I'm learning from you :D. I've watched your previous videos and I learned a lot! I am looking forward for your next videos :)
Thank you for your suggestion pal!!:) I will add it to my list!
hi liyan really excellent method for scalling for print latout method is confusion but this method is faster than that thanks for your tutorial
Thanks for the very helpful tip master. Avid viewer here.👍
Thankyou for your tutorial mah dudues!
Perfect timing for this. Thanks!
You're welcome pal!:)
thanks that u make such a big effort to create these videos ! i hope a lot of people will learn from them
You're welcome! Thank you for appreciating my efforts pal!:)
I like the way you deliver our videos.
I really like the way you explained I did actually same as you but my scale not match with print scale what is the reason
I swear the Layout tab is the bane of my existence. Spent two hours trying to put plans on paper the proper way through layouts. Nothing works. Thank you for showing me it's completely fine to just stick to the Model tab lol
I can help you to do your layout by easy way:
if you draw by:
Mlm just put the scale in page setup 1/1
Cm 10/1
M 1000/1
then you can change your draw in view port with any scale you want it Ex:( 1/100 or 1/200 ..... etc)
but his way is very good and fast
A guide video that I was desperately seeking last sem and learnt it by experience... Now people like me do not need to struggle like me
I struggled with this as well:)
@@LlyanAustria 😁😅
Really good tips and easy to follow! Thanks man!
That is far a lot better and easier and faster to what i used to. Thank you lodiii 😄😉😍
You're welcome!:)
GREAT VIDEO MAN!! I'm still hoping for a video on how to get the proper proportions in perspective :(( but anyways great video and very helpful!!! Flying peace!!!
Thank you for the compliments pal!!:)
Very useful videoo Sir lots of love from India
Thank you pal!:)
You're good in sharing tips and techniques to other I salute you bro keep it up God bless and more blessing to come!! Btw incomingarki student ako hehehee
Llyan i can't get my paper size and printable area to match up and i've copied exactly everything you have done. What am i doing wrong? It comes up with paper size: 420 x 297, but prit rea is 410 x 263. If i click fit to paper, underneath comes up with 1mm= 56.46mm automatically? And if i unclick fit to paper and put in scale 1:50 it still comes up with the same margin! So frustrating.
VERY HELPFUL, THANK YOU!
This is a good tutorial video. Ive graduated already. And ive been working as an apprentice. But im so scared to ask our boss about scales. Because honestly. I passed my exams based on nerves only 😂. Ive been figuring out scaling on paper space. .and im not quite sure with the results. .so my drawings is really questionable. .im always scared if my boss would take out his metric scale and measure my prinouts. .these one feels easieeer. . .and looks easier. .❤ its funny but i think this is a very common problem and one of the things arki peeps would search for hahahaha. .including me.
what do i do if my printable area and paper size dont match?
Good explanation llyan still some tips of scaling plz show us
What unit set-up you use when you draw? Is it in meter unit? I see when you draw a straight 8.5x11 size looks too small compare to the bed shown on workspace when in fact the bed sizes is like 2 meters lenght, how can a number 11 is too small compare to number 2, im a bit confuse
@ 5:32, what we called that thing you used?
How we can set A3 size sheet when we are use 1unit =1cm
I do it in layout plot. Easy. 👍👍
Melvyn Joseph mas madali sa layout, fastest way
I use layout to plot out Plans and drawings that require title blocks and multiple pages, but for making scale model things i use this method haha:)
Another spectacular video kuya!!!!🙌🙌🙌
Thank you pal!!:)
Sustain the awesome job !! Lovin' it!
Thank you pal!!:)
Ask question again sir. What if my drawing Units is Mtr. And my drawing is mtr also, Then i want to put my drawing in that same your way to plot it but it is set into mm. How i gonna do that? Tnx!!
hello sir Austria! just want to ask what is default units?
Nice video bro need need some more similar kind videos !!
Hello sir. What unit are you using before u start drawing?
Do you think this is faster than making plotting sheets and scaling the VP?
In certain occasions it is, like when you need to print just one page. but when doing plans that require repetitive title blocks and pages, using layout is faster:) It just depends on what you're printing.
@@LlyanAustria Yeah makes sense, thanks for the alternative solution!
When I saw ur post I was like:press immediately
Thank you for pressing immediately pal!!:)
Dude... please explain about the line weights according to thicknes.. so that we can create our own template for regular and professional use for all the drawings.. coz it is not possible anyone to create every time for each file. Please..
I'll add your suggestion to my list pal!:)
When we print the drawing to the selected paper, the printer adds a margin. This makes the drawing shrink down so that the scale of the drawing ruins. How to correct this?
i like your videos, very helpful
Thank you sir. Big help!
Hello! I have a problem. Im trying to print out a 1km x 1km site on A3 paper. My model space for this site is 1:1 too. I tried your method to try to put it on an A3 paper (what was required of us in school) but the model is too big for the paper. how do i squeeze it in the a3 paper? i cannot use any other paper sizes since a3 paper is what is required to be used
cool ...this helped so much ...thankyou
You're welcome!:)
You're right! Sharing is caring😆 btw thanks for sharing😅
You're welcome pal!:)
what if the drawing is already on meters and not in mm sir?
I have a question... Do i have to buy a drafting table for college? Is it necessary or its just personal preference?
You can use any table with a smooth and straight edge, i don't even have a drafting table right now haha!:)
Thank you
Another nice video tutorial idol..👍👍
Yung photorealistic exterior rendering nman using vray 2.0,hehehe 🙏🙏🙏🙏 please..
I made one right here pal>> ruclips.net/video/ATRkdT7mg14/видео.html
Gosh how did I forget it's Friday!!!
Too busy with drawing projects i guess haha!:)
THANKK YOU SO MUCHHH
Can you make a video of plotting in the layout for floor plans! Thank you!
Hey, bro can u plz help me, how should I keep all new updates like in software, construction techniques, all News related to architecture and construction. Is there any app or any thing to do this
I just visit, archdaily.com and reddit for my architecture news:)
Hi! I have something to ask. I hope you will help. I am using layout in plotting. The bad thing is, having plotted the drawing at my desired size of paper, the preview of the layout in autocad is perfectly on center of the paper. But when I saved and opened it as PDF file, the drawing was off-centered. It was plotted nearly below the left side margin of the paper. Have you experienced this before? Thanks in advance to those who would help.
This has never happened to me before, have you tried using a different plotter?:)
@@LlyanAustria Yes. Sometimes I use the model space when I print it directly and there's no problem with the margin. But same thing when I saved it as PDF file. :( Maybe I should use an updated version of cad??
@@lyndseymojares6949 Hi! Have you solved this problem? I'm also having the same issue on this one even though my cad is updated. Thanks!
Love the video and thanks for the help
Glad i could help pal!:)
A3 - 2:05
Thankyou so much you saved my day😂
Do I need to change the unit to mm from the units tab?
Yes you do pal:)
@@LlyanAustria Thanks Arch! Papakyaw naman sa projects mo hahaha flying peace!
Thank you❤
Where were you when I was taking my Building Design class? We've been doing it wrong that's why it was never exactly 1:100 in real life 😂
Underrated!
Thanks
Working with buildings I find it convenient to use meters. I'd use mm if I designed small machinery or something.
I mean it'd be silly to type 10,000 or 50,000 all the time when that's the kind of input I keep needing.
Centimetar is standard for civil engineering
Salamat ❤
Make AutoCAD Basic Tutorial please . I always forgot Autocad Command , maybe you can give Tip/Tricks.
I'll add this to my list pal!:)
Just use the layout tab, it gives you a choice of paper size and then scale of the model in the bottom left
I use it from time to time too:)
if the unit already in mm, is it still need to scale it in 25.4? i'm still a newbie
I think if its mm its going to be 2540? Not sure because i think u used M.
No need to scale it pal:)
idol! maraming salamat
Same method tayo sir. May konting difference. Math don't lie. Haha. Layout kasi ambagal ko. Haha.
Haha yeah, mahirap nga sa layout, minsan confusing pa:)
Sir tinuturo din po ba ang ganyang mga software's sa college?
At anong year po mag sisimula pag gamit nyan, manual palang po kasi ako marunong sangayon balak ko pong mag archi next year.
Usually po 3rd year tinuturo yung AutoCad sa College.
Yup around 2nd year or 3rd year may AutoCad na subjects:)
Hello sir? the scale doesn't match when I try the steps ;(
Hi sir llyan 😁 ask ko lang po if you can teach us about Revit kahit basics po.... isa po kase ako sa di alam mag revit at gusto ko matutunan. Thanks po
More power po sa channel nyo and thanks po sa lahat nang vids ♥️
I suck at revit unfortunately haha:) Hanggang basics lang ako. Try watching The Balkan Architect, he has lots of revit tutorials:)
Thank you so much!!!
thank you lods!
hi kuya llyan, you are one of my biggest inspirations with pursuing architecture. would it be possible to interview you for a school homework?
I'm kinda super busy haha:) You could just email me, my email's at my channel description:)
aaaah!!! 😳 will do kuya llyan! thank you so much!!
Thank you bro
You're welcome pal!:)
hi kuya llyan! can you do an autocad tutorial for beginners?
I will add this to my list pal:)
It’s a hp envy 13 laptop with i7 16gb of RAM 512 SSD good for architecture?
Yup it's good enough:) Just make sure to get one with a gtx1050 ti or higher:)
Goodmorning sir ask ko lng po sana ma pansin nyo. Practicing Draftsman po ako.
Tanong ko lng po.
I have a house plan with 10x10 meter
Sinubukan ko 1:100 pero sobrang liit na ng drawings. A1 nga pala size ng paper. Sinubukan ko rin po 1:50 halos kalahati rin sa laki. Sana po maka reply kayo.
Nga pala. I subscribed to your chanel because of thoes good content. Marami kaming natututunan sa inyo.
GOD BLESS!!😄
Thank You Po Sir!
Good day po. Pano po kung yung dimensions ko sa drawing are in meters.. kailangan ko rin po ba e convert ang dimension example A1 into meters? Print scale po kasi naka lagay lang ay inches or millimeters. Salamat po.
Hi pls make a video on how to use tech pens and how to avoid bleeding of tech pens in tracing paper. thank you! ☺☺
I made a video a while back about tech pens pal >> ruclips.net/video/3cb5hqRHCFs/видео.html check it out here
How do I search for information? Whenever I search on Google or RUclips for something, I have something else that does not relate to that thing that I want 😢😢😢
Just try digging around and eventually you'll find what you need:)
Sir pano po palitan yung units to mm? required po ba or you just draw the measurement na gusto mo?
Dwgunits select millimeter
Fantastic little tutorial! But I suggest reducing the level of your background audio a bit, or at least choose a more chill or slower pace music. I found it a little distracting while I was intently listening to your instructions which was a little on the fast side. Regardless, thank you for sharing your knowledge
I totally agree pal!!:) the music was a bit too loud on this one haha, anyways thank you for the constructive comment!! It helps me out a lot:)
Awesome!!😱
Thank you!!:)
Have you tried scaling in Layout VP??
I have tried that and found it a bit harder haha!:)
Oh thank you ! I am more interested to learn about AutoCAD, but the problem is I don't have laptop😑
Gotta get that laptop pal!:)
😍
What about Paperspace scaling..?
I don't know what that is haha!:)
Llyan Austria It's the paper layout setup. A whole lot easier to scale and text and dimensions are done on paper space so they are consistent throughout all the sheets. None of that being done on the model space. I used to do what you are doing 20 years ago, but I found paper space (layout) text and dimensioning more efficient.
Great Video
Thank you pal!:)
Using paper space is much easier & faster
True, but in certain tasks like making a scale model thingy this is faster:)
@@LlyanAustria can you show how to scale in paper space
2:41 was a good one Bro felt this videos bit fast as I am not able to understand
I'll make it slower next time pal:)