Thanks. I bought one off the street, and putting a new blade on it was killing me until I saw this. Evidently, the guy I bought it from put the inner washer for the blade on backwards, but after watching this, it's all good. You have very good camera angles and explanations.
❤😂 Love it brother this is so helpful I've actually had that exact saw for gosh 7 or 8 years and unbelievable. I must have made 2 or 3004 1000 cat zoo knows and replacing the blade now. Just incredible technology thanks again for the quick video and PS. I sometimes have trouble getting it in the hole as well smiley face😅😮😊😊😊
Ay bro I swear I saw extra bolts in your box it passed me that you said you took the security bolt off I was about to give it to home depot 💨 🌳 good video tho helpful 👍🏽
You had to tell the people to make sure to install the blade in the proper direction, this is important.. you would see an arrow on the blade and it should be in the direction of the rotation, which is counter clockwise if looking at the blade emplacement from the water bin side
I’m having a problem with my blade. It’s installed the right way, with the bolts and nuts as instructed but it’s hitting the left side of the metal motor cover. Is there something wrong with my blade? Or am I trippin? 😬😂
@@naturesthumb New , looks like the blade has to be super tight , it’s better now but still not clean cut I am cutting 1/4" Mediterranean ceramic tiles
Bought this yesterday and the manual is not helpful, really appreciate it. 🇨🇦💯
Great to know I wasn’t the only one that thought the same thing 😭 was convinced I was mentally challenged 😂
It’s not helpful at all!
Yeah that manual is insulting, you shouldn’t have to find a RUclips video for proper assembly!
Thank you!! This was really helpful. The instructions that come with it suck. But your video was awesome.
Excellent set-up guide, thank youuu!
Thanks. I bought one off the street, and putting a new blade on it was killing me until I saw this. Evidently, the guy I bought it from put the inner washer for the blade on backwards, but after watching this, it's all good. You have very good camera angles and explanations.
Very helpful video in all set up
Thanks, man. Definitely helpful!
THANK YOU, THANK YOU, THANK YOU!!! Showing the close up are great!
❤😂 Love it brother this is so helpful I've actually had that exact saw for gosh 7 or 8 years and unbelievable. I must have made 2 or 3004 1000 cat zoo knows and replacing the blade now. Just incredible technology thanks again for the quick video and PS. I sometimes have trouble getting it in the hole as well smiley face😅😮😊😊😊
Thank you. Helped a ton.
Thanks for the video but it would have been nice, if they would include all those instructions in the book they sent me.
Thank you for the video
Much appreciated sir
Thank you so much- this was really helpful.. !!!
Ay bro I swear I saw extra bolts in your box it passed me that you said you took the security bolt off I was about to give it to home depot 💨 🌳 good video tho helpful 👍🏽
Thank you so much, bruh. 👍🏾
There are holes on the part of the stand that the table sits on. You can put set screws there to keep it in place.
Just a tip you don’t have to take the two screws out. Just The one single
Screw. Then slip the bracket under the screws.
Good video.
Thank you!
Me ganastes y me suscribo gracias
Thank You
I’m trying to figure out how to put the stand together. All I got was two all thread screws and four nuts.
Well I jumped the gun on that comment 😂 it wasn’t four nuts, just two. I figured out how to put the stand together.
“Sometimes I have a hard time getting it into the hole.... but that’s just me” 😭
haha
Awesome, thanks dude! The manual instructions suck!
Thank you Sir
Thank you so much
You had to tell the people to make sure to install the blade in the proper direction, this is important.. you would see an arrow on the blade and it should be in the direction of the rotation, which is counter clockwise if looking at the blade emplacement from the water bin side
Thank you so much. The written directions are awful so figuring out which is the inner nut, etc is impossible without the video!
No problem
I’m having a problem with my blade. It’s installed the right way, with the bolts and nuts as instructed but it’s hitting the left side of the metal motor cover. Is there something wrong with my blade? Or am I trippin? 😬😂
I would return it, but make sure your safty release is starting off in correct location when opening and closing first.
Desde puerto Rico las instrucciones no sirven para nada,muchas gracias por el video ahora puedo usarla....
Thanks. The directions were not helpful
Vibrate like crazy and the blade is touching the metal it’s garbage
Did you buy it used. If you having that many issues take it back asap. Mine still works great after use and several years.
@@naturesthumb New , looks like the blade has to be super tight , it’s better now but still not clean cut I am cutting 1/4" Mediterranean ceramic tiles
@@naturesthumb blade is too thick and not sharp at all
@@Entrepreneurusa tough out there. mine works excellent.
Well that sucked, didn't see how it works...