In this video I do an updated comparison between the artillian hydraulicdiverter kit that I just installed on my tractor and using the Rear remotes for hydraulic third function Hydraulic 3rd Function Comparison - Hydraulic Diverter Vs Dual Rear Remotes on a Compact Tractor ruclips.net/video/YbCKsoh_I2s/видео.html Thanks for watching and check out our other John Deere 2038R compact tractor videos at ruclips.net/video/G9ccCrIRsgY/видео.html And subscribe to our channel at ruclips.net/user/Rockhillfarmandhomes Buy me a coffee - www.buymeacoffee.com/rockhillfarm
Great job, Brock! You'll love having that 3rd function control on the joystick and the Artillian diverter valve. I really like your method of connecting the electrical. Great that you found a way to avoid drilling through the fender. My install on the John Deere 2210 was simple also. The 2210 has a little different joystick system (and no boot), so running the line down it, and into the fender was easy.
@@RockhillfarmYT Thank you and yes we are. a lot of frustrations of course but I expect we will be relieved and happy. Covid did not make this easy at all!
My diverter kit will be here Wednesday. I'll try and remember to take the side panel off before installation. Mine will be a little different as I have a 3038E so my joystick is on the loader not the fender. It might make running the electrical a little easier.
Thanks for sharing. I hope the install goes smoothly As first I thought that the bolts We’re not long enough to clamp on my mast. After talking to customer service it ended up that they are just a tight fit and I wasn’t trying hard enough
Hey Brock, love your channel. I am ordering this kit, and am curious as the the size of hydraulic connectors on the front block. I see that they are both female connectors. Are they 1/2" couplers? Also, are you happy with the way your joystick switch turned out, or is it worth it to order the Artillian ball handle?
I'm just getting ready to install this, but have instantly ran into a problem. The clamps that came with the valve don't for the first side of the arms. Did you run into this problem? Thanks for the video, it's a great help!
I had a little bit of problem with that. I have the MSL loader and it requires longer bolts. They originally sent me the shorter bolts and then they had to send me the longer bolts Then it still didn’t seem like it was going to fit at first, But I just had to get the ears to bite into the mast a little bit
I’ll be putting together a universal diverted for my bobcat CT225 soon which will end up very similar to this. I might mount the valve on the loader arm rather than the mast, which will allow me to reuse the original hoses. I think the bulk of the install would be easier with the loader removed from the tractor.
Good video, I’m looking forward to getting mine one day, but I’ll be dealing with a cab.
In this video I do an updated comparison between the artillian hydraulicdiverter kit that I just installed on my tractor and using the Rear remotes for hydraulic third function
Hydraulic 3rd Function Comparison - Hydraulic Diverter Vs Dual Rear Remotes on a Compact Tractor ruclips.net/video/YbCKsoh_I2s/видео.html
Thanks for watching and check out our other John Deere 2038R compact tractor videos at ruclips.net/video/G9ccCrIRsgY/видео.html
And subscribe to our channel at ruclips.net/user/Rockhillfarmandhomes
Buy me a coffee - www.buymeacoffee.com/rockhillfarm
Will this work on a 2032r gen 1? looks fairly universal?
It is universal. For some models they may have different mounting hardware.
Great job, Brock! You'll love having that 3rd function control on the joystick and the Artillian diverter valve. I really like your method of connecting the electrical. Great that you found a way to avoid drilling through the fender. My install on the John Deere 2210 was simple also. The 2210 has a little different joystick system (and no boot), so running the line down it, and into the fender was easy.
Thanks for the feedback and thanks for watching
You must feel like you have a new tractor with all of your artillian gear
Very informative. I will remember what you did when I get ready to install one. 👍
It’s definitely a nice set up. Thanks for watching
Nice job!
Thanks. Is That house ready to move into yet?
@@RockhillfarmYT couple of weeks if everything goes as planned! Thanks for asking!
Congrats
I’m sure you guys are excited
@@RockhillfarmYT Thank you and yes we are. a lot of frustrations of course but I expect we will be relieved and happy. Covid did not make this easy at all!
My diverter kit will be here Wednesday. I'll try and remember to take the side panel off before installation. Mine will be a little different as I have a 3038E so my joystick is on the loader not the fender. It might make running the electrical a little easier.
Thanks for sharing. I hope the install goes smoothly
As first I thought that the bolts We’re not long enough to clamp on my mast. After talking to customer service it ended up that they are just a tight fit and I wasn’t trying hard enough
Hey Brock, love your channel. I am ordering this kit, and am curious as the the size of hydraulic connectors on the front block. I see that they are both female connectors. Are they 1/2" couplers? Also, are you happy with the way your joystick switch turned out, or is it worth it to order the Artillian ball handle?
Very cool info, big like
Thanks. The diverter seems like a big improvement over my previous third function set up was running the rear remotes up from the back of the tractor
I'm just getting ready to install this, but have instantly ran into a problem. The clamps that came with the valve don't for the first side of the arms. Did you run into this problem? Thanks for the video, it's a great help!
I had a little bit of problem with that. I have the MSL loader and it requires longer bolts. They originally sent me the shorter bolts and then they had to send me the longer bolts
Then it still didn’t seem like it was going to fit at first, But I just had to get the ears to bite into the mast a little bit
What made you go with this system over the wr long 3rd function?
I have a bunch of artillian products already and I love their company and their customer service
Doesn't the Long 3rd function essentially limit you to one rear remote, so that top and tilt, or Brock's stump grinder would not be workable?
Which stump grinder did you get?
Baumalight 3p24
I’ll be putting together a universal diverted for my bobcat CT225 soon which will end up very similar to this. I might mount the valve on the loader arm rather than the mast, which will allow me to reuse the original hoses.
I think the bulk of the install would be easier with the loader removed from the tractor.
Thanks for sharing