A two inch EDC micro ratchet radically improved the performance of my mini everyday carry tool Kit
HTML-код
- Опубликовано: 5 сен 2024
- In this video, I upgrade my EDC mini tool kit by replacing the 3.66" (93mm) mini bit driver with a much smaller 2" (53mm) ratcheting bit driver. Watch as I test each driver using a torque wrench to see which one handles torque better. Surprisingly, the smaller 53mm driver outperforms the 93mm driver! This switch not only improves the performance of my kit but also frees up space in my EDC kit for additional tools, enhancing its overall functionality. Perfect for anyone looking to optimize their everyday carry tools.
------
#edc #EverydayCarry #ToolReview #BitDriver #EDCUpgrade #edctools #edcgear
------
Share photos of your EDC with us on Reddit! Goto: / earthling_edc
------
🔗 Watch Next:
1. The Human Maintenance Kit in a Mini EDC Pouch - • The Human Maintenance ...
2. Low Cost Everyday Carry (EDC) Mini Pouches -
• Low Cost Everyday Carr...
3. Micro EDC Marvel: Testing the Limits of a 1/2oz Organizer -
• Micro EDC Marvel: Test...
👍 Like, Share & Subscribe for more content on urban EDC
------
As usual, there is a free PDF that gives you links to all of the items that appear in this video (including the 3D STL file for the printing your own Pocket Rack) . The PDF can be downloaded from here --
bit.ly/ToolsJe...
I have not been compensated for listing the items featured in this video. I include these links and the discount codes (where applicable) as a service to my viewers. Enjoy!
------------------
- POCKET RACK™ GIVEAWAY ! -
For those interested in participating in our Pocket Rack™ EDC organizer giveaway, we are going to be giving away one Pocket Rack™ mini. It is the same design that was featured in this video: • Latest Mini Pouch & Po...
It will include a set of the new custom made elastic bands that were featured in this video. To enter the giveaway:
1. Subscribe to the EarthlingEDC channel at / @earthlingedc
2. Then submit your email address at earthling.com/...
If you have entered one of the previous giveaways, you are already entered for this one. Giveaway entries will close on Aug 31th 2024. The winner will be randomly selected on Sept 1st 2024 and notified shortly after. One entry per person.
What are your thoughts about the 711L mini ratchet? Post them here in the comments.
ALSO, be sure to check us out on Reddit. Go to www.reddit.com/r/Earthling_EDC/ you can post images of your EDC!!!! I'd love to see what you carry and why. Thanks for taking the time to stop by today!
Don't forget a fresnel lens 👍
You could easily fit a short pencil and some magnets too.
Is your charger cable also a uSD card reader ?
Rovyvon are superb flashlights.
Two challenges I've been working on, inspired by this channel: compact and light enough kit to carry every day on my body with zero hesitation due to weight or bulk; and designing the card (which I've found can be made old school, with a drill and a saw, since I don't yet have a 3D printer) to not require a bunch of fiddling and puzzle piecing to easily access and replace the tools. Like the channel does, I continue to refine. (While also trying not to lose myself down the OCD rabbit hole, LOL) Love the content, and find that while I have a huge arsenal of tools, the little EDC pack is always my go-to due to the ultimate convenience of it. Psychologically, the tool that you already have on you is always the most likely one to get used, if it can do the job. No matter how many others you may have that require foot steps to get. Recycling an old phone case back for the card raw material, that would otherwise be tossed, is another brilliant idea from this channel. Thanks!!
@bkanegson - Thank you SO MUCH for taking the time to share your thoughts about this channel. It's nice to hear feedback about where subscribers are taking the ideas I've shared and are refining them even further. If you feel up to it, take some time to post some of your completed projects to our Reddit page located here: www.reddit.com/r/Earthling_EDC/ All the best to you and thanks again for posting .
This video was where I started watching you, and learned what "EDC" meant. Now my RUclips feed has too much.
I have found the 711L ratchet with the Steinwhale extension and bits to be very compact, light, and useful. I had been skeptical because the bits are so short, but they have worked in most cases I've tried, including several bicycle repairs and adjustments. In cases where I would prefer a locked setting for the ratchet, the bit in the handle with the extension in the ratchet for leverage works well.
The small tin the 711L came in fits the whole set with all the bits, with a little cotton to keep it quiet.
Im a woman but i have so many edc pouches with different things in it…and i love this tool!!!…small…compact…perfect….keep it comming…i enjoy your content….
@heathkinn - Thank you for taking the time to post your comment. It is sincerely appreciated. I can assure you there are many more EDC videos on the way :-)
I just came across this video by accident. I find the way to carry all the useful items well organized in the smallest space really ingenious. There is also a PDF with details and links to the tools. It's really great! Thanks for this great post!
@Trixman101 - Thank you so much for your feedback. It is sincerely appreciate !
this is hands down my favorite EDC channel. you have original ideas, and a more realistic approach than most other EDC creators on youtube. keep up the great work and thank you for the out of the box ideas on how to EDC!
@I_Of_Providence - Thank you so much for that very kind feedback. It is sincerely appreciated.
Just looking at the packaging I realize with what love and thoughtfulness all of these things were put together. You can see that a person is deeply interested in it.
@artemgoncharenko646 - Thank you so much for your feedback. It is very much appreciated!
That’s the exact ratchet I got a good while ago to carry with my Leatherman and find it way more useful that the 711L that fits into the tool bit driver. I have an extension that fits into the Leatherman with my kit too and what’s great is you can just put it into the bottom of that 711L and boom you have a regular length 1/4in driver handle.
@The_RC_Guru - Thank you for taking the time to post. I agree with you. It's a great little tool and as long as you carry a bit extender with it, the small handle is really not an issue.
Hey Phil!
I think it’s time to re-think EDC as Everyday Carry to Evolving Daily Carry. This episode further strengthens this idea. What do you think? Keep on building 😊
@Olyphoto7 - That's a very good suggestion. Almost all the EDC videos I've published since starting this channel last year are about how to adapt and evolve your EDC. The tech keeps changing and the use cases keep changing so the kits we make evolve so that they can adapt to our needs. I like it... :-)
I have the 711L lollipop and Leatherman-compatible ratchet. I'll say right away I'm an industrial mechanic, working on everything from pneumatics to electric motors, hydraulics to HVAC, with some plumbing thrown in. I use micro/EDC sized tools for 95% of the jobs I do. If you want to work fast you have to. 711L makes some great products that I cannot recommend enough, the lollipop being my favorite carry-everywhere screwdriver and the bit-insert ratchet coming with to tighten up hex bolts holding small pneumatic cylinders or solenoid valves. Most of my jobs could be completely finished with those plus a couple knipex pliers. I'll have to get this ratchet, I know it will come in handy.
@Raeilgunne - thank you for your post. The Lollipop is an amazing tool. I'm going to include it in an upcoming video. I agree with you regarding the tools you mentioned. They are all solid, good quality tools that can do things that you would not expect from their size. Thanks again for taking the time to share this info.
I bought that little Knipex mini cobra, and I'm sorry to say I don't like it, between not much and at all, it may be the size of my hands (XL) but I cannot put enough pressure on the grips to do any meaningful work. But I can really recommend the 6" 87 01 150. you can get some power into these.
@@EarthlingEDC @Raeilgunne LOVE LOVE LOVE the Lollipop. Best pocket screwdriver I've ever used. And the Steinwhale bits fit. Can't wait to see your video on it, Phil!
@CrimeVid - This might be the solution to having small pliers that don't need sustained pressure....See: ruclips.net/video/xFD8tsJ5uWg/видео.html
@@EarthlingEDC Thanks for showing me this, I have a pair of small vice grip pliers that I often use, I think I'll keep them as they are though ! Small tools I like for their ability to be used in tight spaces, not because of their inherent portability. I'm perfectly happy with a tool box the size of a decent lunch box.
Thats an impressive amount of tools in not a lot of space. It's too big to EDC for me personally, but it's almost enough as a minimalist motorcycle kit for short trips
@martinfisker7438 - Thank you for taking the time to post. If you want a lighter carry, just load up one side of a pocket rack. It will keep the tools from banging around in your pocket and depending on what you keep on it, it can be a reasonably light carry as well. Enjoy!
Excellent, excellent video! Love this kit and you do a great job describing it. Only thing I’d recommend is to become an Amazon Associate so you can make money off your recommendations. I bought both the NexTool and Steinwhale bit set from your video, but you could have made a few bucks off of me. Just a thought!
EDIT: Just found your PDF! That’s wonderful, but I bet putting the links right in the description would be quicker for people.
@LandmanEDC - Chad, Thanks for your feedback. The PDFs get a very significant number of views and my regular viewers seem to enjoy them. I do run product links in the description, but the pdf is another option that can be used alone, or in conjunction with the info in the description. I use both techniques. Many thanks again for sharing your thoughts here..
Algorithme brought me here. 🙏 Thx, this edc kit will improve my cycle touring set up
Thanks for being a new subscriber. I sincerely appreciate the feed back. Since you are a fellow cyclist, This video might interest you as well... ruclips.net/video/dhOmvDzmUf0/видео.htmlsi=PHrrK1BmGuoNsZ-Z all the best to you..
Great stuff, I like the idea of the card, so simple when you see it.
@tims728 - Thank you for your feedback. I sincerely appreciate your comments and hope you will have the opportunity to try one out for yourself.
super cool! I haven't seen anything like this before (EDC tool kit).
Normally, on vacation, I put together a small loose tool kit for items I would need. It's easy to lose the tools. I like the compact package idea and will try to assemble small purpose driven kits that stay togehter. Thanks for the great idea!
-- I just watched your bungee video. Excellent!
@dinwa276 - Thank you for your post and for being a subscriber - Purpose made mini EDC kits are interesting to put together with Pocket Racks. Checkout my "Human Maintenance Kit" video ruclips.net/video/MjCQekjDm2E/видео.htmlsi=wtkKp43J9d1huqMr
If you don't want to fight with pulling out the bits from the Steinwhale extension, get the Wera universal extension recommended by Todd Parker. It won't work with the Wiha double sided bits but beats pulling out the stubby bits with pliers.
@stephengaren2219 - Thank for taking the time to share that information. I need to take a look at that video . Thanks for suggesting it. Todd produces some great content.
Love this! Subscribed right away when I seen the video. I definitely want one of these! I’ll be researching your vids for more fun useful info. Thanks! 🤘
Personally, I own both the Steinwhale bits and the wiha bits, and prefer the wiha. The Steinwhales are too short and fit a little awkwardly in tools. I kept their bit holder and replaced them with wiha. I also own the 711L and love it, but bang for the buck am now interested in the Power Torque for other kits where size may not be as premium a factor. BTW - Steinwhale makes some really good tools at a great price. I have another set of bits and ratchets I use for knife maintenance that is fantastic.
@egbluesuede1220 - I agree. I like the WiHa bits a great deal. They have always worked well for me. I'm just starting to get into the Steinwhale bits, but have not had any issues with them so far, so that's been going well for me. I've got another video coming out sool that features another style of the 711L mini ratchets, working with a Nextool multitool. Interesting use case... Thanks for posting!
Credit to Todd Parker’s channel for the steinwhale 711L combo, he even sawed the extender down to be more compact
@rogerp.2442 Thanks for taking the time to post. Todd does excellent videos. I have not seen that particular video, but will check it out. Based on the test that I had with the torque wrench in this video, I would not cut down the bit extender for my use. My hands are too big and a longer handle on the 711L ratchet is going to give more even distribution of pressure allowing me to apply more torque if needed. For those not familiar with Todd's channel, be sure to check it out here: www.youtube.com/@todd.parker his table top videography is exceptional.
Great stuff! I’m a big fan of minimalism.
@urbancarvers8974 - Thank you for your post. I sincerely appreciate your feedback.
Your Kits are Beautiful. Well done Sir!
@youcanthide004 - Thanks for your feedback. It is sincerely appreciated.
Great video, Phil! I knew you'd love the Steinwhale kit.
Is that the Mini Sailor with the big scissors and small pliers? Or the regular pliers with the small scissors?
@ParkerBinion - Thanks again for sharing that info about the Steinwhale bits. I've had several viewers pushing me to get the Steinwhale bits and your feedback finally got me to pull the trigger :-) Much appreciated. The mini sailor featured in the video is the model with the large scissors. THE SCISSORS ARE EXCELLENT! I think there is a discount code for them in the PDF that is in the description. All the best to you...
Nice kit. I built one with an Ares 70040 mini ratchet and Knipex pliers also! It's been very useful but I'm always looking for items that will increase capability. A flashlight you might want to check out is the Skilhunt H150. It's a AA headlamp but it makes for an awesome right angle flashlight. I have two of them, one I use at work daily in server racks and under computer workstations. I can tail stand it and point it at what I'm working on and with the headlamp beam profile being wider its great for up close work. It's got a constant current driver so the brightness does not go down in each mode as much as typical flashlights and its the most efficient in terms of runtime for a single 14500/AA flashlight I've seen. It's slightly longer than the Rovyvon A5 though but adds more side lighting brightness. I got both the 519a 4500k and XM-L2 6500K versions and the XM-L2 is just more impressive with 10-20% more brightness depending on the mode for the same battery life. For something so small I prefer to prioritize brightness over tint.
@practicalguy973 - Thanks for your post. That's a nice little light. The dimensions are good for a pocket rack as well. www.skilhunt.com/portfolio/h150-aa-14500-usb-magnetic-charging-led-headlamp/#1543941458975-87e9d02d-f32d I might reach out to them to include one in a future video. Many thanks for the suggestion.
@@EarthlingEDC Awesome. The only thing that is large for EDC is the magnetic charging cable. I dont worry about taking it with me since I have AA alkaline in most places I go and NIMH rechargeable batteries at work if I run out of power. I like the design of the headlamp band to, its pretty compact. You can get away with just one strap if you really want to save a little more space. I carry the headlamp band on night bike rides and will take it backpacking/ bikepacking for sure.
Thanks again for bringing this to my attention. I have one being shipped to me. Depending on how it tests, I will include it as part of a kit build in an upcoming video.
@@EarthlingEDC Awesome. I've owned a lot of AA flashlights over the years, its been the most useful one for me. Good luck with testing! For backpacking/bikingpacking I was looking for a small water proof, impact resistant power bank to charge flashlights like the H150 and my phone. I ended up going with the Wurkkos WK15 which is another flashlight! I actually got two of them and that gives me a really packable 10'000mah of powerbank and follows the one is none rule so I've got a complete backup if one fails while out for a weekend. Also for camping it has the most low modes out of any high power flashlight and a decent UI for $30 each. Its not a perfect flashlight as the beam has the fried egg look but for what I bought it for I like it a lot and having redundancy for lighting is good.
@practicalguy973 - Thanks for sharing this info on the WK15. I'll check it out.
Greetings Earthling. On this planet we hae often wished for a life form that would show a clean small EDC kit for off terra and on... K I'm done... But seriously, Subbed and liked because you approached the new gear as "we will see" and the rest of the carry was, well, what I do. Great job and TY for introducing me to a potential change up. Those bits are freakin' TINY. but so are my pockets. "I'll be back"
@turtlepoi - Many thanks for taking the time to post your feedback on this video. I also appreciate the sub :-) looking forward to hearing more from you..
There are a bunch of great tiny ratchets now out by Wiha, Wera, Icon, and even Klein. In practice tiny ratchets like the 711 can be pretty hard to use and gain any leverage with. I recently bought the Icon set and really like the versatility of the tiny flex head ratchet as well as the fact that the bit extension can be used as a t-handle, or handle extension to add a bunch of leverage. The Wera kit feels the most "premium" but lacks some of the bitholding versatility. It looks like the 711 has come down a lot in price, I remember looking at them before and seeing the prices up towards $80.
@JohnDoe-df2zz - I'm seeing the same thing with the ratchets. There are some nice ones on the market. I agree with you regarding the 711L prices have dropped quite a bit. Many thanks for posting!!
OUTSTANDING 👏🏼👏🏼👏🏼👏🏼👏🏼
@behindthespotlight7983 - Thanks for your feedback and for being a subscriber. It's a very nice compact setup that actually works really well. It's rare to get that combination :-)
Watching the video, the Steinwhale stubby screwdriver intrigues me the most. I have been on the hunt for something like that for a while now. Of course I will likely pick up the 7-11 too;) Great content as usual. Getting some more cards printed soon to fill up.
@cgolf100 - Thanks so much. The Steinwhale setup is very nice. I've enjoyed testing it's abilities. I thin you will too. You need to do some more videos that include Pocket Racks on your channel :-)
@@EarthlingEDC just so happens a friend at work delivered 2 new pocket racks to me today and yesterday I cut some stainless cards slightly bigger then the micro card to better fit the smalls containers. Next video up is converting my EDC key chain to a pocket card, fingers crossed it all fits:)
@@EarthlingEDC I find the Steinwhale bits to fit too well in the ratchet, so much that I have to use my knipex to really pry the bits away. Do you find that experience to be similar to yours? If so, what do you recommend?
@deathpunchrigby1664 - I've inserted both sides of each bit into the 711L ratchet section. Some of them can be quite tight, but I can insert and extract all of them on both sides of each bit. The larger bits are easier to insert into the ratchet than the smaller bits. When I look at them closely it appears that the center hex portion of each bit needs to transition down to the the smaller size of the bit head. For the small bits that transition can be quite steep resulting in a sharp edge that can hang up on the 711L locking mechanism that engages with the bit. If you want to make the bits easier to insert into the ratchet, I'm going to get a small flat jewelers file or maybe a small piece of emery cloth sandpaper and see if taking down those sharp edge will make them easier to insert into the ratchet. To extract a tight bit, don't pull it out, push it through from the opposite side of the ratchet. That's what has consistently worked for me.
Ironically the steinwhale bit extender is perfect for wiha bits (the leatherman bit extender works great too) and the steinwhale bits work way better in a standard bit extender like one from wera.
@AdaHan - thank you for your post. I've been trying various extenders with the Steinwhale bits and may even add a a few Wiha bits into the mix now that the Steinwhale extender works for both. It just creates more options, which I like. thanks again for sharing your info here.
I carry basically full size versions on most of your things like I carry a 21700 flashlight and a kraftform kompact plus lots of other stuff just in my pockets everyday
@james10739 - Thank you for your post. If that works for you, then you have the perfect EDC setup for your needs. My preference for my needs is to keep my EDC kit as compact as possible with good quality tools. Everyone is going to have a different set-up based on their daily needs and how they like to carry. thanks again for taking the time to share what you carry.
Really liked your video. Well done. Project Farm on YT can provide some ideas on how to test the strength of those ratchets.
@wpherigo1- Thank you for the info and for being a subscriber - I;ll be sure to check out project farm. The testing that I was doing was more about how my hand would hold up to the handles on the ratchets. For that purpose I thought it worked out pretty well :-)
Great video, I’ll have to look in to that bit set. Have you ever considered replacing the mini bic lighter with a clipper peach/ clipper mini? It’s substantially smaller and round, almost the size and shape of a tube of chap stick.
@joshz5714 - Thanks for your feedback. YES! I've been meaning to try that out for quite some time. Thank you for reminding me.
Wow, great kit
@benterwellen - Thank you, it was an enjoyable build for me to do. I appreciate the feedback and thanks for being a subscriber!
Love your channel! Thank you for sharing your videos! Have you have used a Gerber dime? I was wondering your thoughts and also have you used a lighter bro? I love having one on my lighters great scissors.
@Byaaah1282 - I've never used a Gerber dime. The "lighter bro" is interesting looking thanks for brining it to my attention www.amazon.com/LighterBro-Stainless-Lighter-Sleeve-Titanium/dp/B00HEPK0DG/ref=asc_df_B00HEPK0DG/ And thank you for being a subscriber !
@@EarthlingEDC I use my lighter bro often. The scissors are very sharp from the factory and they are spring loaded. Also the Gerber dime is very tough and spring loaded. They even have mini tweezers
thanks again for sharing these...
Nice kit, thanks for sharing it with us.
JT
@scenicdriveways6708 - You are very welcome. Thank you for your post.
Some of the bits from the steinwhale are too small for the 711L. This is due to the locking mechanism for the bits in the 711L is at the top of the wratchet socket/bit holder and not in the middle.
I currently have the T6/T8 Stuck in the 711L.
@paddypat - thank you for your post. I'm not having that issue with that bit or any of them for that matter. You might have something in the either the ratchet or on the bit that may be preventing it from being removed. Might try some very light oil to loosen it up. Best of luck and let me know if you got it out.
I had the same issue with the steinwhale bits. I ended up ordering 2 711L and 2 sets of the steinwhale bits to confirm it wasn’t a one-off situation. I ended up returning the steinwhale bits and will probably order the LTT bits at the expense of a slightly larger footprint.
That’s interesting. So it could be either one causing the problem. I’ll try the Steinwhale bits with some other drivers that I have and see if there are any issues. Thanks for sharing that information.
Nice little Edc Kit
@AntonioClaudioMichael - Thank you for the post and for being a subscriber. It is sincerely appreciated
@@EarthlingEDC no problem at all on being a subscriber good video I would make one of these kits but I don't have a 3d printer pretty cool setup
I am a edc addict ❤❤❤ i find your set up superb but I can't get the card can you help 😂😂😂
@pamodousawaneh - Great question that I get often. This should help. See: drive.google.com/file/d/1Qqvq3WIo0F5qmE4Ee7HY9md08XJqg8Sq/view
Do those mini double ended bits fit in the ratchetingpart of the 711 ratcheting driver good enough?
Like do they 'lock' in or seat deep enough into the ratcheting head to stay in and work properly?
Do the back end tips stick out thru the back?
Great vid nice advice, and thanks for sharing these lil pieces....
lol soo many lil bits n pieceson Amazon I see and want, but never get cuz they don't ever give u full details for like bit sizes or whether they work in reg. bit holders or what haaaa... but these vids are exactly what we all need
@dabmanian_devil - Thank you for posting your questions.
1. Do those mini double ended bits fit in the ratchetingpart of the 711 ratcheting driver good enough?
Yes, they sit very tightly in the ratchet
2. Do the back end tips stick out thru the back?
Yes, but that was the case with the WIHA bits as well. I have had no issue with them because of that.
Keep in mind that depending on where you purchase them, you can return them if they don't work as expected for you. I sincerely appreciate your feedback.
Why not try the flat Leatherman bitkits?
IMHO
@Freddy-Da-Freeloadah - I probably will try them out one day, but I think they will take up considerably more space on a pocket rack, than the Steinwhale bits. Thanks for asking.
Why not stick something in the end of that screwdriver bit holder as a spacer so the bits fit better?
@theunknownatheist3815 - Thanks for the post. I could probably drop a small magnet into the bottom of the tube, but getting it our would be problematic. Adding some type of spacer is no a bad idea though. Thanks..
Good stuff thanks
@tdg0101 - Thank you for the feedback and for being a subscriber.
Can you provide Amazon alternatives to your temu and Ali Express links? I'm wanting to get this stuff within my lifetime. The tubes especially and the cases please!
I had done this in a previous video. see: drive.google.com/file/d/1QqYObcr0BKQyvSREEp7yzexcPw4MHpUf/view
I don't see the same neoprene pouches available on Amazon though. But take a look at: www.amazon.com/s?k=neopren+pouch&i=electronics&crid=1CZD0PV2U75BN&sprefix=neopren+pouch%2Celectronics%2C63&ref=nb_sb_noss
I wish I had a 3d printer. I want an edc card.
These Pocket Racks™ come in different versions and are an open source 3D print design, so anyone can print one or customize the design. The only major restriction is that you can't sell them. There is a utility patent pending. To make one for yourself, go to: www.thingiverse.com/search?q=Pocket+Rack+EDC&page=1 and download any of the six versions that you would like to print. You can then go to a website like printathing.com, or a local 3D printing service in your area and have them make one or more of them for you. This PDF has more details on sourcing the elastics that are used with them. See: bit.ly/MicroEDCOrg and this video shows how to make the elastics bands that are used on the Racks: ruclips.net/video/ir9DbaY8P8Y/видео.html Enjoy !
In this video are you using the pocket rack or the mini pocket rack?
@kechidonick Thank you for your question. In the video I'm using a mini pocket rack, but a standard pocket rack will work just as well and give you a bit more room to work with as well.
So much better than the Stein 🐬 Dolphin. 😂
@StarDarkAshes - Thanks for your post - Do a search on Google for SteinDolphin . :-)
Sits deeply in the ratchet 😂 you said socket 5:30
@AntonioClaudioMichael - Good point. That particular wrench has a socket in the handle as well as ratchet in the head. When you drop a Steinwhale bit into the handle, it sits very deeply into the socket. The wiha bits that I was using previously don't do that. Many thanks for your post!
@@EarthlingEDC you were talking about the ratchet head when you said socket that's why I thought it was funny. I understood what you meant. Good video
Is there anywhere that one can buy a pocket rack with cords? Not many 3D printers or elastic cords here in Colombia.
@michaeleber4752 - Than you for your post. These Pocket Racks™ come in different versions and are an open source 3D print design, so anyone can print one or customize the design. The only major restriction is that you can't sell them. There is a utility patent pending. To make one for yourself, go to: www.thingiverse.com/search?q=Pocket+Rack+EDC&page=1 and download any of the six versions that you would like to print. You can then go to a website like printathing.com, or a local 3D printing service in your area and have them make one or more of them for you. This PDF has more details on sourcing the elastics that are used with them. See: bit.ly/MicroEDCOrg and this video shows how to make the elastics bands that are used on the Racks: ruclips.net/video/ir9DbaY8P8Y/видео.html Enjoy !
Do you plan on selling the pocket rack, for those of us that don’t have access to a 3d printer..Ty
@benterwellen - Thanks for asking. The best answer for me right now is not at this time. However, it is pretty simple to have one printed for you. These Pocket Racks™ come in different versions and are an open source 3D print design, so anyone can print one or customize the design. The only major restriction is that you can't sell them. There is a utility patent pending. To make one for yourself, go to: www.thingiverse.com/search?q=Pocket+Rack+EDC&page=1 and download any of the six versions that you would like to print. You can then go to a website like printathing.com, or a local 3D printing service in your area and have them make one or more of them for you. This PDF has more details on sourcing the elastics that are used with them. See: bit.ly/MicroEDCOrg and this video shows how to make the elastics bands that are used on the Racks: ruclips.net/video/ir9DbaY8P8Y/видео.html Enjoy !
I have no way to print out the rack cards. Do you know any supplier that sells them? Thanks
@rodsmyth - Thank you for your post and for being a subscriber. These Pocket Racks™ come in different versions and are an open source 3D print design, so anyone can print one or customize the design. The only major restriction is that you can't sell them. There is a utility patent pending. To make one for yourself, go to: www.thingiverse.com/search?q=Pocket+Rack+EDC&page=1 and download any of the six versions that you would like to print. You can then go to a website like printathing.com, or a local 3D printing service in your area and have them make one or more of them for you. This PDF has more details on sourcing the elastics that are used with them. See: bit.ly/MicroEDCOrg and this video shows how to make the elastics bands that are used on the Racks: ruclips.net/video/ir9DbaY8P8Y/видео.html Enjoy !
Do you have links For each item on your Edc kit for Amazon
@AntonioClaudioMichael - Sorry, just the links that are in the PDF that you can find in the description for this video. You can take the item description in the pdf and cut and paste them into Amazon's search which should help you to find them.
@@EarthlingEDC oh okay thanks for letting me know it was the pdf
Is there a list of links for buying each item?
Yes, I always include a link to a pdf file that contains a list of all the items featured in each video. You can find it in the description for this video.
I got the 711L mini ratchet and the Steinwhale bits too. Unfortunately, the Steinwhale bits don’t work with the 2-in-1 extension (flips from a hex bit holder to a square socket holder) 😢. I can’t remember the name of the short bits I got instead.
Do those mini 2 in 1 bits work in 711l ratchet? Like the actual ratcheting head, not the magnetic bottom hex spot lol.
@@dabmanian_devil I think the largest flat head won’t fit but all of the other bits fit into the ratcheting part. The 711L and Steinwhale bits work great together. You can get around the large flat head not fitting by using the extension that comes with the Steinwhale set.
@dabmanian_devil - Thank you for your post. Yes they do. I can even get the large flat head bit to fit. Keep in mind that there might be slight variations in size between the bit driver and the bits, but the for the set-up that i have everything seems to fit.
@corbenj - Thank you for sharing that information. I also tried it with my 711L 2in1 extender and it did not work for me either, but I was going to use the Steinwhale extender anyway so its not an issue for me, but it is good to know.
@@EarthlingEDC I had to be careful with the Steinwhale extender. My FIL has a metal hip and I was worried the magnet would rip it out of his body 😂
Where did you get the pouch ? It’s a perfect size
@archerknightly779 - Thank you for your question. I post a PDF file in the description of my videos that contains all of the items and where you can source them from. Take at item #3 in this PDF file: drive.google.com/file/d/1rxgIBs_h92mpRAzbuHo6WBLZOcuM91AD/view?usp=sharing
@archerknightly779 - Thanks for your post. Check the description for this video. You will find a link to a PDF that lists everything in this video and where it can be sourced. See: drive.google.com/file/d/1rxgIBs_h92mpRAzbuHo6WBLZOcuM91AD/view?usp=sharing
Could you add links to these items?
@jessepatnaude5397 Thank you for your post. All of my videos contain a link to a downloadable PDF in the description for the video. That PDF has links to everything in the video. Enjoy..
would you recommend the nexttool mini over the gerber dime?
@kechidonick - Thank you for your question. The Gerber dime has pliers as the primary tool, The Nextool mini sailor that I featured in this video has a large pair of scissors as the primary tool. I specifically chose it for those scissors. They are great! Nextool also makes a mini sailor with pliers as the primary tool, but I have not tried it out yet, so I can't give you a recommendation for them. Thank you again for your post.
link please for tool
bit.ly/ToolsJewels
Any links?
Look in the description for this video. There is a PDF you can download that lists links to everything. Enjoy!
Love you ideals.
Put kits together and sell for $150 + shipping
Or crate affiliate links
If you're reading comment if you'd buy for feedback
@sgtdice - Thank you for your post. These are good suggestions and I may pursue them in the future, but right now I'm more interested in creating videos and sharing new EDC ideas with our viewers. Thanks for taking the time to share your ideas.
@sgtdice - Thanks for you ideas. Both of them would work just fine.
Your NOT carrying that around everyday in your pocket. Thats just silly. Im all for small micro tool kits but lets not pretend that is suitable to carry everyday.
@aussiehardwood6196 - Thank you for your post. You are correct. I absolutely am not carrying that in my pants pocket daily. However. I do carry it in a coat pocket, backpack, sling pouch, belt pouch, in my car and at my office. It's always within a few step or on my person in some way. If your definition of EDC is your pants pocket, you are correct it's not suitable for me to carry it that way and I would imagine other would feel the same way. I do know that there are viewers who use it as a pocket organizer with small tools mounted on just one side of the rack. That actually works and can be quite comfortable depending on what is on it. Thank you again for sharing your thoughts on this.
Isn’t it time to start selling the BRILLIANT cards and bands? I don’t have a 3-D printer but would buy a couple sets right now🫤
@behindthespotlight7983 - Thanks for asking and for being a subscriber. I do these videos because I sincerely enjoy the topic if I started selling these, I'd have less time for making videos and interacting with our viewers. These Pocket Racks™ come in different versions and are an open source 3D print design, so anyone can print one or customize the design. The only major restriction is that you can't sell them. There is a utility patent pending. To make one for yourself, go to: www.thingiverse.com/search?q=Pocket+Rack+EDC&page=1 and download any of the six versions that you would like to print. You can then go to a website like printathing.com, or a local 3D printing service in your area and have them make one or more of them for you. This PDF has more details on sourcing the elastics that are used with them. See: bit.ly/MicroEDCOrg and this video shows how to make the elastics bands that are used on the Racks: ruclips.net/video/ir9DbaY8P8Y/видео.html Enjoy !
Interesting. I ordered several of these items. Might I suggest also adding a small 4 inch Crescent wrench?
I have been a mechanic for forty five years and I have carried one of those in my pocket for the last twenty.
It has come in handy countless times.
@bustednuckles2 - Good suggestion. I've been using the Knipex xs or the 4" locking pliers which can double as a wrench in a pinch, but I might give the crescent wrench a go to see how it works out. Thanks for te suggestion.