I have your rotary chuck and love it. Wondering if it's possible to hook it up to the x-axis instead of the axis so it aligns with the left to right layout of my NEJE Master 2.
Hello How can I make the design align correctly to the center? I have everything correct according to your instructions and the measurements when recording the design come out well, the only problem I have is if I want to center the design For example: I have a 5 cm rectangle and when I center the laser on the design it is not the 2.5 cm it should be, it goes too long. I would appreciate your help ortur team, thank you
Hello, just need to set the parameters in the engraving software before using YRC, but need to send you the manual file or screenshot, you can contact support@ortur.net email, my colleague will help you you!
When i add the 1mm to the X & Y pos it positions my image to just outside the top left corner, instead of the inside of the lower left corner like in the video. What am I doing wrong
I have a Ortur Y-axis V 1.0 Rotary Chuck and a TwoTrees TS2 and command $141 is invalid. 120mm per rotation is no good and nether is 96. Testing and playing it appears that 117mm per rotation suits my configuration.
🤩🤩This is so cool, thank you for your patience in trying it. I'm really happy for you to hear that you were able to find the parameters which suits your configuration. I hope you can maintain your love and continue to enjoy the fun these things bring you.😘😘
Hola como puedo hacer para que mis trabajos no me salgan con rayas, es que mi rotatorio no hace bien fluido los trabajos y siempre me sale con rayas raras
Hello, please contact our tecjnical support for help, better to provide with pics or videos so that they can comfirm the problem more easily: support@ortur3d.com
I have done the $22=0 and I still get an error 9 I have the LM2 Pro. I have had my chuck device for months and havent really got it working properly. I had t working once last nite but could not get it to work everything was backwards (even though I turned on mirror in the rotary setup section
🥺🥺I am so sorry to hear this. If it is convenient for you, you can record a video of the relevant issues. Send the video with the email to our email 👉support@ortur.net. We have professional technical staff to help you check the video to determine the cause and help you solve the problem.🤗🤗
Si el motor de la máquina de la que hablas es también un motor paso a paso de 42, el ángulo de paso del motor tiene que ser de 1,8 grados y la resistencia de 10 ohmios, para que se pueda adaptar
Have a nice day. i want to ask would this rotary roller also fit my Swiitol e24 pro?
I have your rotary chuck and love it. Wondering if it's possible to hook it up to the x-axis instead of the axis so it aligns with the left to right layout of my NEJE Master 2.
Hi, I'm sorry, but the YRC can't be connected to work on the X-axis
thankyou so much,,, it kept leaving lines so i copied your settings,,, brilliant
Glad that everything goes well.
Is it compatible with atom stack s20 pro?
I have the Ortur Master 3 and Ortur Master 2 connected to Ortur chuck rotary. How do I navigate both lasers without disrupting settings in Lightburn?
What is the correct mm per rotation setting - or how do you find this out ?
Please check 9:44 of this video, mm per rotation=96
@@orturnet that's for the 3, does not work for the lm2 pro
@@StravidesUk The setting is the same for all machines on LightBurn.
@@orturnet Apologies - I should have read the manual better - in the manual it states that OLM2 AL1 AL2 I need to enter 120 - so I followed that ;)
Hello
How can I make the design align correctly to the center?
I have everything correct according to your instructions and the measurements when recording the design come out well, the only problem I have is if I want to center the design
For example: I have a 5 cm rectangle and when I center the laser on the design it is not the 2.5 cm it should be, it goes too long.
I would appreciate your help ortur team, thank you
Hello, just need to set the parameters in the engraving software before using YRC, but need to send you the manual file or screenshot, you can contact support@ortur.net email, my colleague will help you you!
When i add the 1mm to the X & Y pos it positions my image to just outside the top left corner, instead of the inside of the lower left corner like in the video. What am I doing wrong
Change the job origin to the left corner.
Hello, is this rotary compatible with LM2?
Yes, it is compatible.
Buenas, sabeis si el eje de rotación es compatible con Máquina de corte y grabado láser CO2 Flux Beambox
Sorry, we can't make sure that.😔😔
i have the Ortur Master 2 the normal one not the pro, is this axis compatible with it?
Yes, it is compatible.
Es compatible con la cortadora láser de Unit Electronics CO2-4040?
Sorry, we don't know much about Unit Electronics CO2-4040
I have a Ortur Y-axis V 1.0 Rotary Chuck and a TwoTrees TS2 and command $141 is invalid. 120mm per rotation is no good and nether is 96. Testing and playing it appears that 117mm per rotation suits my configuration.
🤩🤩This is so cool, thank you for your patience in trying it. I'm really happy for you to hear that you were able to find the parameters which suits your configuration. I hope you can maintain your love and continue to enjoy the fun these things bring you.😘😘
Dears, a have to TTS 2 pro 20 W , this is compatible us?
Thank´s so much!
Sorry that we are not familiar with TTS 2 pro 20 W, better to use the same brand.
Hola como puedo hacer para que mis trabajos no me salgan con rayas, es que mi rotatorio no hace bien fluido los trabajos y siempre me sale con rayas raras
Hello, please contact our tecjnical support for help, better to provide with pics or videos so that they can comfirm the problem more easily: support@ortur3d.com
I have done the $22=0 and I still get an error 9 I have the LM2 Pro. I have had my chuck device for months and havent really got it working properly. I had t working once last nite but could not get it to work everything was backwards (even though I turned on mirror in the rotary setup section
🥺🥺I am so sorry to hear this. If it is convenient for you, you can record a video of the relevant issues. Send the video with the email to our email 👉support@ortur.net. We have professional technical staff to help you check the video to determine the cause and help you solve the problem.🤗🤗
I'm trying to figure out if the Ortur Y-axis Rotary Chuck will work with my NEJE 3 max v2. Can anyone help me out?
Sorry, don't know about the details of NEJE 3 max v2.😢
Es compatible con atom stack s20 pro??
Si el motor de la máquina de la que hablas es también un motor paso a paso de 42, el ángulo de paso del motor tiene que ser de 1,8 grados y la resistencia de 10 ohmios, para que se pueda adaptar
i use the LM2 Pro S2. Are the settings in lightburn the same?
You're right, it's the same.
ES COOPATIBLE CON LA SCULPFUN S10 ?
No.
yes compatibel mit S10 Sculpfun,Adapterkabel A!
I Need tutorial for software láser grbl
Hi,you can watch this:ruclips.net/video/xm1Qyz1c5IY/видео.html