Blacking out headlight Porsche Cayenne Turbo 957 - DIY How to
HTML-код
- Опубликовано: 5 сен 2024
- DIY on how to bake open headlights from a Porsche Cayenne Turbo and step by step blackout of the headlamps and what items to use to seal it back up.
This method applies to all Cayenne, Cayenne S, Turbo, Turbo S models from 2003 to 2010 but is based on a 957 Chassis from 2007-2010.
Products used for this DIY:
Rust-Oleum Automotive 253365 12-Ounce Acrylic Lacquer Spray, Black Gloss
amzn.to/2KfdZm2
Rust-Oleum Automotive 253366 11-Ounce Acrylic Lacquer Spray, Clear Gloss
amzn.to/2WNY5QR
Turtle Wax T-240KT Headlight Lens Restorer Kit
amzn.to/2CVJziD
3M 03601 Plastic Emblem and Trim Adhesive
amzn.to/2KfOnFz
After this video, i had to reseal the lamps because moisture was getting inside the headlamp, so i had to use the following product to fully seal it.
RetroRubber OEM Grade Butyl Headlight Sealant, Black
amzn.to/2WTIcIN
If you are interested in doing the newer Porsche 4 LED Mod, you can use this kit while you are inside the lamp
amzn.to/2D02Pvt
Model used: Porsche Cayenne Turbo Techart Edition
=======================
Support This Channel on RUclips and Subscribe
tinyurl.com/y5...
Donate for Car Parts and Videos
www.paypal.me/...
======================
Follow me on Social Media:
Instagram
/ porschemacan95b
Facebook
/ porschemacan95b
======================
Direct Link to this Channel
saulv.com
/ saulv
& he did it all either sleepy or high, either way, love this guy.
& he's convinced me, thought my 1st Porsche would have tan interior, but black against the orange led lights & gold emblem, boss.
9:50
Saul! Talk about a throw back!
Lol I have 2 Turbo 957s. I can’t save to get away from expensive to modify/repair cars. 😁
A shop wanted $800 to do this !Good luck to me opening mine and doing it tomorrow !
Really appreciated this... And, thanks for the warning about wet sanding.
You should have upgrade the projectors lenses with the clearer one while you in there
Well just finish the mods on mine today and reseal them! Upgraded the lens to clear lens from retrofitsource.com , also I use RetroRubber Oem grade Butyl to reseal the headlights ! So far they look absolutely amazing , time to go slap them back on!!
Nice job
Hi mate, thanks for sharing.. Nice step by step video..
How did u put the staples back in? And how good was the resealing of the headlight lens? Any water leaks afterwards..
Thanks for your time
The staples are simply there to hold the rubber in place while it curates. A lot of people use clamps or you can staple new ones. To reseal them I use morimoto headlight sealant amzn.to/3E8L9KV
Thanks
Looks great afterwards. LOL
Where’s the second video? I wanna see the similar Panamera Porsche lights!
Helo Frend can you made a Video from your Beautiful Rear Lights! Thank you a Lot
Thanks for posting this video. Have you noticed your headlights projecting less light after this? Or just about the same as before? Looking back is there anything you would have done different? Besides the lens restorer, just looking for tips. I'm looking to do this on mine. Thanks. :)
As long as you do not paint the reflectors around the lamps and projectors you have no loss of brightness. The only thing I would had done different it's getter a better seal but I will redo it to retro fit the 4 led mod like the newer porsches. I'll do a video then as well.
@@SaulV Thanks Saul, I appreciate the response.
No less bright? I don’t believe it.
Thanks for the vid. How and where were you able to obtain the front bumper valance (with the dual fog lights)? It makes the car much more aggressive instead of that typical pointy front
poloboy that is part of the Techart Body kit. It can either be purchased at the dealer or many after market online shops
How is the silver housing (2:29) attached to the black headlight assembly? Are there any clips or screws? Or do they just slide off?
They simply slide off once the housing is off
Hey dude I have one broken headlight with a ballast on it and want to replace. I can only find another headlight that has no ballast. Will this work in my car? What do I do with the old ballast from the broken headlight?
You should be able to pick up a used one on eBay but you do have to make sure is one that has a Xenon HiD system and not hallogen. Once you get it you should be able to transplant all the internals to the new one
@@SaulV cheers dude. I’ll check ebay out
What temperature did you set the oven to?
How do we remove the headlights frame?
Bruhhhhh Loks like shit 😂
Because everyone wants worse visibility at night! 🥱
It literally comes OEM from factory as an option 😂