@@nazarettos6987 no problem brother. Thanks for the helpful video. Unbelievable I spent so much money for this suv and yet they can't provide good lighting inside. Lol.
I am going to have to return mine to Amazon. My Rav4 is a 2021 and they have changed to different kind of bulbs, not like the one you are showing. The LED's won't fit. Oh well, worth a try. Great videos.
Thank you for this tutorial video, helps me know what to do and what not to do as well as what to purchase. I been struggling to find a video of how to remove the map light section since one of my light bulbs been flickering and finally went out,I have a 2019 Camry SE btw.
Does it matter how you install the bulbs? I'm considering doing this to my car but I'm scared I'm going to break things. The factory installed bulbs are so low light I still have a flashlight in my car. My car is brand new and only had 4 miles when I drove it off the lot but so odd how dimm it is.
no worry installing these lights ,as you see i did it in my Rav4.Do not install cheap Amazon lights go with LASFIT brand T10 LED lights. The only thing to be careful when removing plastic map light/vizor cover, do it carefully. Its been 2 years now since I installed these, still working great no issues.
The first video shows exactly how to get access to the bulbs. Others were not as detailed and clear and left me without success. I'm ordering Lasfit LED's. Thanks!
Thank you for positive feedback. I really like these LASFIT leds, good quality and you can also reach their customer service. I tried other brands of LEFs but they are not comparable in quality. I also upgraded my fog lamps to LED
@@nazarettos6987 Not really. There are some confusing videos out there. That talk about taking the center trim piece off first and then removing the light covers and replacing the bulbs that way. Your method of taking the whole Console out and replacing the bulbs is much easier. You just have to have the right tool and get a hold of the whole unit and pry it out from those red clips.
I believe it is,but check on lasfit website. Even if the bulb is little bit longer, yoi can slightly bend that metal connector and push in the bulb into place.
All you need is T10 for your interior lights for dome light get 31mm if you have issue plugging it in,you can bend that small metal pice that hold led in place and it will fit.
Your installs were the T10 Lastfit bulbs. But the dome light replacement was a bullet shaped Lastfit. According to my research that was the 28MM 194 168 that you can only buy in pairs like all Lastfit bulbs. Correct?
Great video, just wondering i have 2021 toyota rav4 , is lasfit compatible? And was checking lasfit site with the T10 led and it can be use with the dome light too, thanks
Please provide a link to these LED lights for purchase. The link provided took me to a generic page that asks for year/make/model. The problem is that it doesn't show the LED lights you highlighted here.
I have a 2021 R4 Prime, I have read in some forums where they say that you have to disconnect the car battery to change the map lights. Your map lights looked similar to mine and I noticed that you had no issues doing it live. Is the tool you are using part of a light package or did you buy that separately, I have some, but not that thin, if separate, can you please provide link. Great video.
I did not have to disconnect battery. You can just have your car shut off for this procedure. Also that yellow plastic tool that I used,I bought it Harbor Freight tools its called trim removal tool. You can also find this plastic parts trim removal tool at Menards or any home improvement store.. These T10 leds are great, click on the link in description and use my code. You don't really need that plastic tool kit,but why I'm using it is?because I don't want to damage trim with screw driver. Thanks for watching. www.harborfreight.com/nylon-pry-bar-installer-kit-4-pc-63594.html
@@nazarettos6987 sorry that am just getting back to your massage. Yes the gray part on the inside. I can get the back of the gray plastic up but the front of it Seems to be stuck, I don't want to brake it.
Thank you so much for your information and tutorials about how to install interior led lights and yes I did it exactly what you showed us but unfortunately I break one plastic red screw from the map light with flat body when I was pulling them out . I order everything from Amazon lastfit led lights. Liked and subscribed my fren. 👍🙏
When my LED did not work, I thought I blew a fuse. I just had the sun visor pushed too far forward. When I pulled the visor back halfway, they LED worked.
Do you have any problem with the LED interior lights? Since LED lights consume less wattage than halogen, have these LED caused any warnings from the Rav4 system?
I just got a rav 4. Right away I noticed how poor the lights was. I replaced all of them with leds. Now I'm going to get these. Thanks for the link.
Thank you for positive feedback
@@nazarettos6987 no problem brother. Thanks for the helpful video. Unbelievable I spent so much money for this suv and yet they can't provide good lighting inside. Lol.
Perfect - this is the best video on RUclips showing how to do this…thx very much!!! 👍
Thank you so much for positive comments.
I am going to have to return mine to Amazon. My Rav4 is a 2021 and they have changed to different kind of bulbs, not like the one you are showing. The LED's won't fit. Oh well, worth a try. Great videos.
It was kinda hard to push them in but it should work T10. Send me picture nazarettos@gmail.com
Thank you for this tutorial video, helps me know what to do and what not to do as well as what to purchase. I been struggling to find a video of how to remove the map light section since one of my light bulbs been flickering and finally went out,I have a 2019 Camry SE btw.
I am glad i was able to help. Just make sure to use plastic trim removal tool.
Great video Bud but the maps lights were more difficult than I thought thanks !
Thanks for positive comments
It was 😂 but I ended up using my pry tools . Good quality ones. They need to be strong. Just got to be careful
Thank you, very helpful. Just ordered my bulbs, the OEM lighting on my SE is very poor.
I love LASFIT products, good quality also their floor mats are good.
Does it matter how you install the bulbs? I'm considering doing this to my car but I'm scared I'm going to break things. The factory installed bulbs are so low light I still have a flashlight in my car. My car is brand new and only had 4 miles when I drove it off the lot but so odd how dimm it is.
no worry installing these lights ,as you see i did it in my Rav4.Do not install cheap Amazon lights go with LASFIT brand T10 LED lights. The only thing to be careful when removing plastic map light/vizor cover, do it carefully. Its been 2 years now since I installed these, still working great no issues.
I just installed my LED´s, thank you for your video and help
Thanks for positive feedback
The first video shows exactly how to get access to the bulbs. Others were not as detailed and clear and left me without success. I'm ordering Lasfit LED's. Thanks!
I installed the lights today thanks to your video ,great tutorial
God bless you 😊
Thank you for positive feedback. I really like these LASFIT leds, good quality and you can also reach their customer service. I tried other brands of LEFs but they are not comparable in quality. I also upgraded my fog lamps to LED
Thanks your video was the 1st I watched and the best! Everything went smoothly
Thank you for positive feedback, welcome to Rav4 club
Great video. Made changing out the lightbulbs in my 2021 RAV4 XSE a breeze.
Thank you for positive feedback. Was it difficult to remove map lights in the middle? Some people had difficulty
@@nazarettos6987 Not really. There are some confusing videos out there. That talk about taking the center trim piece off first and then removing the light covers and replacing the bulbs that way. Your method of taking the whole Console out and replacing the bulbs is much easier. You just have to have the right tool and get a hold of the whole unit and pry it out from those red clips.
Do these leds fit all the light sockets,Amazon only says map light ,would like to do all my interior lights
I want to install led lights on my 2023 rav 4, can you please show a video for a 2023 RAV4, 2023 is different from earlier years. Thanks
What so different they all use T10 bulbs.
Great Video! Do have a complete list of the Part numbers and exact quantity? Thank You!
All you need is 5 T10 LED and one dome light
@@nazarettos6987 Thank you!!
Thanks for the video and for disassembly hints. it is easy to break some parts if you do them from the wrong point
Thank you! Replaced all, but the cargo lights in just a few mins! What size is the cargo light in the back seat? 31mm?
I believe it is,but check on lasfit website. Even if the bulb is little bit longer, yoi can slightly bend that metal connector and push in the bulb into place.
Thanks you ✊🏼🤝 I changed all my lights in less than 30 min
Happy to help,thanks for positive feedback.
All same size for rav4 (2019)
what trim level of Rav4 do yo have? LE, XLE, Premium, Limited? Thank you!
Its xle front wheel drive 2019
@@nazarettos6987 thank you!
i ended up breaking 2 rivets for map lights in my 2021 rav4 prime? do you where i can find those rivets or type of the rivets?
I bought at my local autostore
Just ordered my lights! Thanks for the video!
You welcome,these arecgreat
Hello, I follow your link to lastfit and all I see was 31mm dome light not 28mm. Did you use the 31mm?
All you need is T10 for your interior lights for dome light get 31mm if you have issue plugging it in,you can bend that small metal pice that hold led in place and it will fit.
Can you please do a video on how to change puddle lights and what size bulbs I need?
My model does not have puddle lights, but i do believe you might need simple T10 bulbs
@@nazarettos6987 thank you 🙏
Great video help me a lot! 👏👏👏
Is the map light setup the same in the Highlander? 😅
Can you please tell the size (mm)of the C5W led ?
I will later, wife took my car
So i need 4 of the T 10 Led and 1 Dome type Led ??
Correct
Your installs were the T10 Lastfit bulbs. But the dome light replacement was a bullet shaped Lastfit. According to my research that was the 28MM 194 168 that you can only buy in pairs like all Lastfit bulbs. Correct?
Can you tell me if these replace Toyota part number 00234-00192 bulbs?. Is this T10 equivalent?
Yes they are T10
@@nazarettos6987 Thanks! Do you know if they replace Toyota part number 00234-00192 bulbs
ruclips.net/video/cfPcgMbhLOY/видео.html
Lasfit is one of the reliable brand
Is there any way to fix the shield of the light if you plucked it out from the wrong side?
Send me picture to nazarettos@gmail.com
What’s name of the back seat dome light
Great video, just wondering i have 2021 toyota rav4 , is lasfit compatible? And was checking lasfit site with the T10 led and it can be use with the dome light too, thanks
Thanks for positive comments. Yeah these lights are great,it's worth paying little bit more for them.
i also have 2021 rav4, there are no change from 2020.. I ordered 2020 mud guard and 2020 roof cross bar
Can I fit it in my future because it seems pretty dim right now.
Please provide a link to these LED lights for purchase. The link provided took me to a generic page that asks for year/make/model. The problem is that it doesn't show the LED lights you highlighted here.
www.lasfit.com/products/t10-194-168-led-exterior-interior-light-package-of-4?rq=na_led-bulbs~mk_toyota~md_rav4~yr_2019~zq_w-bi-led-headlamps~dz_map-light&variant=31256586125396
www.lasfit.com/products/lasfit-31mm-festoon-led-dome-trunk-map-license-plate-light-bulb-de3175-de3021?rq=na_led-bulbs~mk_toyota~md_rav4~yr_2019~zq_w-bi-led-headlamps~dz_dome-light
@@nazarettos6987 thank you!!!
I have a 2021 R4 Prime, I have read in some forums where they say that you have to disconnect the car battery to change the map lights. Your map lights looked similar to mine and I noticed that you had no issues doing it live. Is the tool you are using part of a light package or did you buy that separately, I have some, but not that thin, if separate, can you please provide link. Great video.
I did not have to disconnect battery. You can just have your car shut off for this procedure. Also that yellow plastic tool that I used,I bought it Harbor Freight tools its called trim removal tool. You can also find this plastic parts trim removal tool at Menards or any home improvement store.. These T10 leds are great, click on the link in description and use my code. You don't really need that plastic tool kit,but why I'm using it is?because I don't want to damage trim with screw driver. Thanks for watching.
www.harborfreight.com/nylon-pry-bar-installer-kit-4-pc-63594.html
Can you give list of the bulbs I need ?
For the interior you need T10 led 5 pieces and one dome light led L31. You can also click under my video description and the link will take you there.
@@nazarettos6987 perfect, where should I click
How many lumens does the Lasfit bulb have?
Great video, you explained everything, thank you 🙏🏽♥️🇸🇦
Thank you! This video was so helpful!
Hello, Thank You For Noticing Me. I got it. 👍👊❤️❤️❤️❤️
I try to reply to all my viewers
how many lights i need to this change in my car ? and are all the lights same except the demo light ?
For the interior you will need 5 T10 LEDs, 1 dome light which is NOT T10 and 2 T 10 Leds for back up lights.
I put my pry tool in and broke the little clip 😒
How did you get the gray peace off the rear trunk light without braking it?
You mean on the inside of the light that plastic cover? Well it's as just two point on each side you just lift it up.
@@nazarettos6987 sorry that am just getting back to your massage. Yes the gray part on the inside. I can get the back of the gray plastic up but the front of it Seems to be stuck, I don't want to brake it.
I have trouble getting that piece out also
Excellent video
Hi. What type of LED bulb size that you used for your trunk/cargo light? Thank you for the great video!
T10 leds from Las fit,check my link below. Thanks.
@@nazarettos6987 Thank you.
Thank you so much for your information and tutorials about how to install interior led lights and yes I did it exactly what you showed us but unfortunately I break one plastic red screw from the map light with flat body when I was pulling them out . I order everything from Amazon lastfit led lights. Liked and subscribed my fren. 👍🙏
Thanks for watching, appreciate your comments.
How can I avoid breaking it when I do this? He doesn't really explain in the video and I'm worried I'm gonna break a tab or two now
Gracias pondré en práctica lo aprendido y saludos desde Costa Rica
Thank you for positive comments
The T 10 are very tight does not go to easy,so be careful
Thanks for your video. I purchased a set of LEDS and used your promo code.
These are pretty good ones,much better quality than cheaper leds on Amazon
Thanks for this video! It helped a lot
Thanks for positive comments
If the sun visor is pushed too far forward the vanity lights will not work.
I haven't check it myself,but hen you open sun visor all the way,what's the point of that light if you can't see yourself in the mirror.
When my LED did not work, I thought I blew a fuse. I just had the sun visor pushed too far forward. When I pulled the visor back halfway, they LED worked.
Great Videos, how about footwell lights installation video, that would be awesome.
Thank you! I used your code so thanks for that as well.
Brilliant video, thanks.
Thanks,appreciate positive feedback. I got more videos in the works. Waiting for some parts shipment.
I'm gone do that in ice blue.
LASFIT still holding good, great LEDs had them over two years now.
Unfortunately they don’t send outside the US
Well its very sad,this is very good kayak. They are limiting themselves to US market only. Great product like this should be shipped allover.
Do you have any problem with the LED interior lights? Since LED lights consume less wattage than halogen, have these LED caused any warnings from the Rav4 system?
There are no issues with these interior LEDS. So far I had no problems with LASFIT leds, Toyota does not show any problems in any of the systems.
Can't tell any difference. You need to show both otherwise the camera rebalances the brightness.
Great video!
Thanks appreciate positive feedback
Super, thank you for your good video!!!
Thanks for positive comments
Raisik!!! Hell ya!
Great video. Keep up👍🏻
Thanks for positive comments
Thank you
Didnt know James Corden did car lighting installs too.
Kidding 🤣
@@sgtj0311 I like this joke good one
Great video..thanks
Thanks for positive comments
Thanks very helpful 👍
i have the amazon LEDS and its bright enough...lol
Are they? I’m planning on getting the Amazon ones
They won’t last
@@mubaddagammoh4912 it’s been over 2 years and they all still work just fine. What’s your definition of not lasting? 😂
@@internetabyss i got them about 3 years ago from my tacoma and they are not bright anymore the license plate ones are not working anymore
Thanks for sharing 😊
I think I missed it who makes the LEDs? Jk thanks for your video!
Lasfit
Lasfit
Most my stiff has broken I wouldn't take more advice from him again
What did you break?
So wait ,what's the name of the LED you're using???? 😆 🤣
Lasfit
Thank so much!
you need a manicure
What’s the size of bulbs I need for interior rav4 (2019) … all bulbs are the same ?