2020 RAV4 Interior LED 💡How to Replace ALL Interior lights w/LED lights under $11.00 under 30 Min

Поделиться
HTML-код
  • Опубликовано: 15 окт 2024
  • If i can install these ANYONE can. The cheapest best MOD u can make. Here is the link to the lights on Amazon below. Buy now and save with coupon for only $11
    AUTOGINE White LED Interior Lights Kit for Toyota RAV4 2016 2017 2018 2019 2020 2021 Super Bright 6000K Interior LED Lights Bulbs Package + Install Tool www.amazon.com...

Комментарии • 99

  • @dmak81
    @dmak81 Год назад +4

    Man, thanks! I watch 5 or 6 other videos. None showed to do it the right way. I appreciate you!

    • @okiefoodieking
      @okiefoodieking  Год назад

      Glad to know my video is the right way and thanks for stopping by. I would appreciate if u subscribed !

  • @MV-fv9rm
    @MV-fv9rm Год назад +3

    Brother, you are the man!!!
    I did everything exactly the way you say to do it and I am so happy that I follow directions. Thank you again thank you thank you thank you.

    • @okiefoodieking
      @okiefoodieking  Год назад

      You bet !!! It’s probably one of the best mods I can make to your RAV4! The LED lights are a game changer!

  • @truthhurts228
    @truthhurts228 2 года назад +4

    I've been putting off doing mine, now that I've seen your video, I'm going to finish it today! Great video, thanks much!

    • @okiefoodieking
      @okiefoodieking  2 года назад

      Man I appreciate it! Glad it helped ! Let me know how it turns out!

    • @frappeboynyc7247
      @frappeboynyc7247 2 года назад

      How or should I say where did you purchase the led blue strip light beneath dash board?

  • @richsellskc
    @richsellskc Год назад +2

    Nice job, OFK. Love your attitude in life and your "Love Wins Attitude". What a man, what man!

    • @okiefoodieking
      @okiefoodieking  Год назад

      Thank you for your kind words ! I appreciate it ! Life life to the full !

  • @SydneyRLynn
    @SydneyRLynn 28 дней назад +1

    This helped out, especially with the trunk light!

  • @chadmarkley
    @chadmarkley 3 месяца назад +1

    Lol, great video and funny to boot. Thanks for helping me swap the lights to the wife's car!

    • @okiefoodieking
      @okiefoodieking  3 месяца назад

      @@chadmarkley absolutely! 👍🏼 thanks for watching and glad to help !

  • @evadjg
    @evadjg 7 месяцев назад +1

    Yes, the rear one was a pain! It does enhance vision at night!

    • @okiefoodieking
      @okiefoodieking  7 месяцев назад +1

      Absolutely! Live the more light it gives off in the back. Especially in the hatchback area at night

  • @hectorblanco2179
    @hectorblanco2179 День назад +1

    Gracias amigo por el video me sirvio de mucho

  • @1chrissypaterson
    @1chrissypaterson 4 месяца назад

    Hello. Why didn’t you show taking out the light bulb from upper center console ?
    This step is very difficult.
    I need guidance.

    • @okiefoodieking
      @okiefoodieking  4 месяца назад

      I took it out like the rest I believe.

  • @KnobbysShop
    @KnobbysShop Год назад +1

    I've always hated that the 4 black buttons between the map lights are not illuminated. Is this the same as yours? I can't find the button for the lights in the dark

    • @okiefoodieking
      @okiefoodieking  Год назад +1

      I just put the setting to door so light comes on when door is opened. Is that what u are talking about ?

  • @whistlingtomb3299
    @whistlingtomb3299 4 месяца назад

    How did you get the map light bulb out? Did you twist and pull or just pull

    • @okiefoodieking
      @okiefoodieking  4 месяца назад

      I think I just wiggled and pulled firm but slowly

  • @juhva
    @juhva 2 года назад +1

    0:55 I also tried to remove the map light, or what you call it. I have seen also other video where they remove this clear plastic. But when I tried to remove it, it is very difficult. If it would be cold weather you might broke the plastic. I think you should first remove the grey bigger plastic part around the clear plastic. Then removing clear plastic part is easier. I did it that way.

    • @okiefoodieking
      @okiefoodieking  2 года назад

      I was too scared to remove the gray plastic part and just did it the way I did it. But that is good to know that u can do it by taking the gray cover off. Did u feel it was easier that way ?

    • @juhva
      @juhva 2 года назад

      @@okiefoodieking yes it was easier. Now I found also video for it ruclips.net/video/Wo69pmbBgVs/видео.html look at 5:30

    • @westonwarner363
      @westonwarner363 Год назад

      Yes! It was waaay easier. There are four pull plugs. One one each corner. Pull one side down and the rest will follow. I had a hard time getting the bulbs out so I had to pull the whole piece off. Twist off the bulb cap from above was easier for my weak fingers

  • @Brimoe18
    @Brimoe18 Год назад +1

    I bought the same kit for my 2022 xle premium so let’s hope it works 🤞🏼

    • @okiefoodieking
      @okiefoodieking  Год назад

      I bet u will be good to go ! And hopefully this will help u !

    • @Brimoe18
      @Brimoe18 Год назад +1

      @@okiefoodieking it did help but unfortunately those lights aren’t 2022 compatible, even though it says up to present years :-/ I just tried to do it lol

  • @aladalussi1151
    @aladalussi1151 Год назад

    Thanks mate, this was great , where did you get the led bulbs?

    • @okiefoodieking
      @okiefoodieking  Год назад

      I bought them off Amazon. Thank u brother I appreciate u !

  • @bigfudge20
    @bigfudge20 Год назад

    what are the purple lights called? the ones around the gear shifter/glovebox. great video, i’ll be doing this to mine in the next day or two

    • @okiefoodieking
      @okiefoodieking  Год назад +1

      Thank u! They are blue ambient lights and make a big difference and looks cool! You can go to my other video on nine simple, cheap mods that shows you what they are in the link is in the description

  • @steelcrusher
    @steelcrusher 2 года назад +1

    How do you change the license plate lights?

    • @okiefoodieking
      @okiefoodieking  2 года назад +2

      I am going to change that one sometime but haven’t got there yet

  • @aakashpatel1621
    @aakashpatel1621 Год назад

    Removing the bulb from map light is trouble some. Is it twist and turn or just pull?

    • @okiefoodieking
      @okiefoodieking  Год назад

      Mine was just a pull. Wasn’t bad at all. But I think I had one stubborn one that didn’t want to come out

    • @peggykight8722
      @peggykight8722 8 месяцев назад

      Don’t do what I did. I turned the whole thing and it went up through the hole

  • @shintaro1835
    @shintaro1835 2 года назад

    Nice video. When removing the map light, did you just pull or have to twist it? Thanks

    • @okiefoodieking
      @okiefoodieking  2 года назад

      Thank you ! I think sitter way works . But I think I pulled and twisted :).

    • @peggykight8722
      @peggykight8722 8 месяцев назад

      Well, my bulb went back up through hole and now I have a big hole and can’t fix it

  • @ronaldvintage5776
    @ronaldvintage5776 Год назад +1

    Thanks Okie King !

  • @litopostadan1049
    @litopostadan1049 2 года назад

    Hi, your interior lights look really bright, I also have a RAV4 and I wanna try change my bulbs too. Can you tell me which brand of lights you got, from Amazon too?

  • @janky831
    @janky831 10 месяцев назад

    Where can I find those blue lights for the dash?

    • @okiefoodieking
      @okiefoodieking  10 месяцев назад

      I can’t remember. Check out my other video about 9 simple cheap mods and it has a link in the description

  • @burjis24
    @burjis24 Год назад

    You didnt show well what brand and what size of led bulb is required...

  • @CorradoPicarelli
    @CorradoPicarelli Год назад

    OMG I couldn’t get past the first one! Couldn’t get the lens free and the orange pry thing was bending 😢

    • @okiefoodieking
      @okiefoodieking  Год назад

      Yeah it was scary but I just pushed through it and it worked

  • @alldayrangerover
    @alldayrangerover 2 года назад

    What is the tool you were using? Can I get that from a specific place?

    • @okiefoodieking
      @okiefoodieking  2 года назад +1

      Trim removal tool. Here is the kit u need
      ABN Premium Auto Trim Removal Tool Kit - 11 Piece Pry Bar Set, Fastener Remover, No Scratch Trim Removal Set

    • @okiefoodieking
      @okiefoodieking  2 года назад +1

      Not sure why the link didn’t post its on Amazon. Look for the red set

    • @alldayrangerover
      @alldayrangerover 2 года назад +1

      @@okiefoodieking thank you!

    • @okiefoodieking
      @okiefoodieking  2 года назад

      @@alldayrangerover u are so welcome 🙏🏼

  • @nickbellomo3093
    @nickbellomo3093 3 года назад +1

    Good stuff. Just ordered lights..

  • @datlam2903
    @datlam2903 2 года назад

    Thanks for the video king !

    • @okiefoodieking
      @okiefoodieking  2 года назад

      U are most welcome! Glad it helped u out !

  • @JimFantazzia
    @JimFantazzia 3 года назад

    Just ordered these as well!

    • @okiefoodieking
      @okiefoodieking  3 года назад

      Right on bro! U are gonna love em !

    • @okiefoodieking
      @okiefoodieking  2 года назад

      Hey brother I accidentally deleted your comment 😤🥴 I am sorry that happened. Also did u say a light broke off in the map light and swirling around?

    • @JimFantazzia
      @JimFantazzia 2 года назад

      @@okiefoodieking no, I installed the light into the dome and noticed the bulb spins around easily in the holder and the metal grill part on the bulb winds up facing down in the holder, making the light very dim

    • @okiefoodieking
      @okiefoodieking  2 года назад

      @@JimFantazzia man I am not
      Sure brother. I wish I could look at it. Hard to understand without looking at it. I am sorry the install did not go well

  • @jamescdean9010
    @jamescdean9010 11 месяцев назад +1

    im a fixin to do dis tomorroe

    • @okiefoodieking
      @okiefoodieking  11 месяцев назад

      This will show you the way. U will love it ! It takes some time. But if I can do it anyone can do it. I hope it helps u

  • @agostinodibella9939
    @agostinodibella9939 Год назад +1

    I can’t understand with all the modern technology in these new cars that they keep using incandescent bulbs. LED’s can’t cost that much more for the car companies to install.

    • @okiefoodieking
      @okiefoodieking  Год назад

      I agree as much as we pay for these vehicles why do they not put LED lights in as standard???

    • @agostinodibella9939
      @agostinodibella9939 Год назад

      I was going to order these LEDs for my nephew’s new car. It has a black interior and the incandescent bulbs are so weak. Could you please tell me how they are doing in your car after a year?

    • @murasakifjc
      @murasakifjc 5 месяцев назад

      Toyota has a “buy our top trim model or expect to replace basic things yourself” mentality and it’s only getting worse.

  • @checkitout611
    @checkitout611 4 дня назад

    Just want to save people time here. If you have a 2024 Hybrid XSE (maybe others?) the lighting is built into the PCB boards so you can not do a lighting upgrade.

    • @okiefoodieking
      @okiefoodieking  4 дня назад +1

      @@checkitout611 oh wow. Good to know for the hybrids

    • @checkitout611
      @checkitout611 4 дня назад

      @okiefoodieking yep I bought the lights and just went to do it and . . . No bulbs just LEDs built into the circuit board themselves. It was a bummer.

  • @JosephOlson-ld2td
    @JosephOlson-ld2td Месяц назад +1

    W16W LED reverse lights are 3X brighter, access panel on hatch, but 2024 doesn't have access to license plate liggts, must remove all hatch trim....WTF Toyota ?

    • @okiefoodieking
      @okiefoodieking  Месяц назад +1

      @@JosephOlson-ld2td yeah the factory lights they put in there are are pretty bad

  • @dj3114
    @dj3114 2 года назад +2

    You thought you broke it, I definitely would break it. Therefore, going to pay someone else to do it.

    • @okiefoodieking
      @okiefoodieking  2 года назад +1

      Yeah u will think u broke it taking it off. Can be tricky. But just be kinda forceful with it. However, Toyota want to charge an arm and a leg. And don’t feel like giving those up right now

  • @cherinordstrom3442
    @cherinordstrom3442 2 года назад +1

    You go Boomer Sooner!👍

    • @okiefoodieking
      @okiefoodieking  2 года назад +1

      Haha! Every day I Am boomer Soonering !!! Boooommmerr!!!

  • @cycloopnl
    @cycloopnl Год назад

    The first lights are donr wrong.

  • @speltier1965
    @speltier1965 2 года назад

    I have made SEVERAL attempts to change the map lights & I CANNOT get either cover off. You make it look soooo easy.

    • @okiefoodieking
      @okiefoodieking  2 года назад

      Hahaha it was not easy by any means. I thought I was going to break it!

    • @speltier1965
      @speltier1965 2 года назад

      @@okiefoodieking you made it look easy.

    • @okiefoodieking
      @okiefoodieking  2 года назад

      @@speltier1965 lol thank you. One side was easier than the other. I thought I was going to break the other one I was worried

    • @speltier1965
      @speltier1965 2 года назад

      @@okiefoodieking I have 4 different plastic tools. They are thick & don’t seem strong enough. They fly outta my hands. 😩

    • @okiefoodieking
      @okiefoodieking  2 года назад

      @@speltier1965 Oh man I’m so sorry to hear that I bought my utensils they are red and I bought them at O’Reillys I’m not sure if you have those or not

  • @jgstevens5169
    @jgstevens5169 Год назад +1

    BOOMER!!....

  • @zerofungus
    @zerofungus 2 года назад +4

    First light is incorrect. Gonna snap off plastic tabs doing it this way. Source: I just snapped mine. Need to remove the whole grey piece to do it correctly. Don't be like me and follow this guides directions.

    • @Brimoe18
      @Brimoe18 Год назад

      Sounds like YOU did it wrong lol. How can his be incorrect when he didn’t break anything and the light works lol. Blaming someone else for your issues smh

    • @zerofungus
      @zerofungus Год назад +2

      @@Brimoe18 no, this is not the correct way. Just because it worked in this video doesn't mean there isn't a waaaay easier and less risky way (aka the right way). Find another video. Remove the whole grey piece from the front middle. If not you risk damaging the lense. This comment is to help people not damage their stuff. Feel free to follow that step if you want even after reading this 🤦‍♂️

    • @megawatts-jq5xm
      @megawatts-jq5xm Год назад

      Hey just wanted to tell you that Plz read everything btw Jehovah and his son Jesus Christ love you so much that God would send his one and only son Jesus Christ to die on the cross for our sins and rose from the dead 3 days later Get a relationship with God and Jesus and confess for your sins and Live for Christ and not the world and allow God and Jesus into your hearts. God and Jesus are trying to save you from going to hell.
      HELL IS NOT A JOKE. Jehovah and Jesus are all of our Gods and Lords and Saviors✝️✝️✝️✝️SPREAD THE WORD✝️✝️✝️✝️✝️✝️✝️Pray to Jehovah and his son Jesus Christ get saved today ✝️✝️✝️✝️SPREAD THE GOSPEL✝️✝️✝️✝️✝️✝️✝️

    • @peggykight8722
      @peggykight8722 8 месяцев назад

      My builb went up through the hole

    • @peggykight8722
      @peggykight8722 8 месяцев назад

      I cant get it out and don’t even see it