most people cant appreciate all the work and the fact its a real tank now on a bike that had a fake one just like it to begin with unless they see the video VERY NICE
Thank you so much for these videos I am a retired locomotive engineer and one of my missions is to fix lawnmowers for those that can’t afford the high cost God bless you Tayrl keep the videos coming
Taryl - All of your videos are really good and entertaining. I have a small leaf blower that will not start anymore. I could not fix it and had to buy a new one. I kept the old one knowing someday I would find someone who could help. I think you are it Taryl. You mentioned something in one of the weed eater videos that if you have spark, fuel, compression the only thing left is that the crankshaft key is sheared off. I did not think of that. My sons help me with lawn care and I am thinking one of them broke it. I have confirmed spark with a spark tester. Confirmed compression with compression tester and am squirting starting fluid into the air intake. I ordered a shirt and bing watched all of your videos. You are really helping us out here Taryl!!
The craftsman could have 3-problems 1-stuck piston ring very common. A air cooled engine reaches it highest temp when you shut it off. No air moving past the cooling fins to cool the engine. So the ring will get stuck in the piton groove resulting in low compression. Customers will say it ran when I shut it off now it won't start. 2- the cylinder bolts loosen & it will cause a vacuum leak & possibly blow out the gasket or o-ring depending on when it was manufactured Some models used a gasket, some used a o-ring type seal. 3- carb. manifold comes loose. Check those 3-things.
Hi Taryl, Your channel is great! As a matter of fact, it's my favorite. I watched all of your videos this past weekend! Very good info and not boring at all. Very entertaining. That one with Slippers setting up a tent in your garage was so funny I couldn't stop laughing! Could you please do a video on friction disc replacement? I need to replace the disc on my Ariens platinum 24. Keep up the good work. You should be on tv, you are better than any of the shows that are on now. I am dead serious. Mike
Nice job making that into a real gas tank. I use a product called "Red Kote" for gas tanks, the tank doesn't even have to be totally clean for it to work. I did my 1978 Honda 550K tank 10 years ago and it still looks good, as well as many others.
Taryl, you are the man! Thanks for the explaining and hands on operations on videos. I myself turn to you to get r done. A shout out from Crystal City, TX.
Another "You-Can-Do" video from Daryl. You can use a Ziploc bag to contain them odd shaped pieces and the Evaporust chemical. You'll get 100% coverage. Yeah, bringing down skill level is just as cool as doing it with a TIG. ...or brazing....but brazing introduces another "barrel of monkeys" in the welding/metallurgy arena... Yeah, working with simpler processes (that work just as well) makes successful projects even MORE SATISFYING! Hat's off to ya Daryl.
Hi Taryl Great show always waiting for your next video you are a great presenter I have learnt so much Working on A Briggs in my workshop at the moment , keep up the great work Regards Kerry
For the tank sealers or any POR 15 cans, put a piece of saran wrap on top of the can, then put the cap on. This prevents the cap from sealing to the can and helps extend the shelf life
To keep your can of sealer fresh I heard that you could take your argon gas from your MIG welder and let the argon gas get into the can and then seal it up so the argon gas will take the place of the oxygen instead because it's heavier.
When someone comes in when he’s filming I wonder if he leaves in those teeth or not if not I wonder if he left them in by accident and wondered why he was getting funny looks from the customer lmao
wonder if you could save the excess by putting a little mineral oil or something else into the can? Gently pour it in, over the back of a paintbrush or old spoon? Any thoughts?
It would have been faster and easier to blast it. But the stuff you used looks just like Muriatic Acid you can buy at walmart for 8 bucks a gallon. But you have to neutralize it with baking soda and water or it just keeps on rusting it later on. And I use RedKote and it work really nice on my gas tank.
hey buddy, I have a 2013 craftsman riding mower it starts fine deck is fin but the tractor won't move forward or reverse, what can it be? it was working fine and I stop then it wouldn't move.
we tried that 3m body panel adhesive at work but we didn't have any luck with it the 3m rep even insisted we were doin it wrong n since they're right down the street he stopped by n did it, basically the same exact way we were, the way the directions say n still no success, its strong as shit ill give it that, but to compare it to a weld is a joke, im talkin about a real weld, not usin a 120v harbor freight on a cheap 100ft extension cord weldin over top of rust paint n grease with cheap Flux core
just like any knock off the KBS sucks do not buy and use. i had a 1/2 qt in por 15 gloss black did my back bumper sandblasted and use por 15 primer and metal conditioner and sprayed with a binks number 7 gun needed more for front bumper bought a quart of KBS and did the same way and the top coat didn't stick to kbs primer the primer stuck but the top coat didn't KBS said I did it wrong. I've been doing collision work for 35 years don't think I failed there product did and the cassie savior no better
most people cant appreciate all the work and the fact its a real tank now on a bike that had a fake one just like it to begin with unless they see the video VERY NICE
Thank you so much for these videos I am a retired locomotive engineer and one of my missions is to fix lawnmowers for those that can’t afford the high cost God bless you Tayrl keep the videos coming
Taryl - All of your videos are really good and entertaining. I have a small leaf blower that will not start anymore. I could not fix it and had to buy a new one. I kept the old one knowing someday I would find someone who could help. I think you are it Taryl. You mentioned something in one of the weed eater videos that if you have spark, fuel, compression the only thing left is that the crankshaft key is sheared off. I did not think of that. My sons help me with lawn care and I am thinking one of them broke it. I have confirmed spark with a spark tester. Confirmed compression with compression tester and am squirting starting fluid into the air intake.
I ordered a shirt and bing watched all of your videos. You are really helping us out here Taryl!!
+stevewpmac What brand of blower
I bought a Stihl. The old blower was a Sears Craftsman
The craftsman could have 3-problems 1-stuck piston ring very common. A air cooled engine reaches it highest temp when you shut it off. No air moving past the cooling fins to cool the engine. So the ring will get stuck in the piton groove resulting in low compression. Customers will say it ran when I shut it off now it won't start. 2- the cylinder bolts loosen & it will cause a vacuum leak & possibly blow out the gasket or o-ring depending on when it was manufactured Some models used a gasket, some used a o-ring type seal. 3- carb. manifold comes loose. Check those 3-things.
Hi Taryl,
Your channel is great! As a matter of fact, it's my favorite. I watched all of your videos this past weekend! Very good info and not boring at all. Very entertaining. That one with Slippers setting up a tent in your garage was so funny I couldn't stop laughing! Could you please do a video on friction disc replacement? I need to replace the disc on my Ariens platinum 24.
Keep up the good work. You should be on tv, you are better than any of the shows that are on now. I am dead serious.
Mike
+Mike Thanks for the kind words. That would be a good HOW-TO on the ariens I just need to get one in here for repair.
Nice job making that into a real gas tank. I use a product called "Red Kote" for gas tanks, the tank doesn't even have to be totally clean for it to work. I did my 1978 Honda 550K tank 10 years ago and it still looks good, as well as many others.
HAVE NOT HAD INTERNET FOR A WHILE AND REALLY MISSED YOU GUYS !
I know this is an old video, but the badge that says "Unsafe! Do not Use!" hanging around you neck really cracked me up..... Heh heh heh!
Taryl, you are the man! Thanks for the explaining and hands on operations on videos. I myself turn to you to get r done. A shout out from Crystal City, TX.
Thanks for watching Mark! And as always, there's your dinner.
Another "You-Can-Do" video from Daryl. You can use a Ziploc bag to contain them odd shaped pieces and the Evaporust chemical. You'll get 100% coverage. Yeah, bringing down skill level is just as cool as doing it with a TIG. ...or brazing....but brazing introduces another "barrel of monkeys" in the welding/metallurgy arena... Yeah, working with simpler processes (that work just as well) makes successful projects even MORE SATISFYING! Hat's off to ya Daryl.
Great video Taryl!! Thanks for the tips on the Tank Sealers !! I got a couple needing sealed.
+Ol James Thanks for watching!
Hi Taryl
Great show always waiting for your next video you are a great presenter I have learnt so much
Working on A Briggs in my workshop at the moment , keep up the great work
Regards
Kerry
nice job mr. taryl im already waiting for the next episode . you guys have a great week
dang I wish I saw this before my first attempts.
Live, learn, and adapt.👍
Loved the video taryl. Keep up the great work. One of my favorite channels on RUclips. Have a great day, and “there’s yer dinner!”
For the tank sealers or any POR 15 cans, put a piece of saran wrap on top of the can, then put the cap on. This prevents the cap from sealing to the can and helps extend the shelf life
I spotted a crankshaft straighten tool on your table. I used one many times. Stens has been good to me.
hi taryl u have the best videos i loved your mini bike videos it helped allot keep up the good work
Educational and entertaining . My new favorite channel
Great stuff. Looking forward to the next episode!
Great stuff . Good tips on welding and the tank sealer.
Awesome vid buddy. 👍👍
+STEVE ROB Thanks Steve!
To keep your can of sealer fresh I heard that you could take your argon gas from your MIG welder and let the argon gas get into the can and then seal it up so the argon gas will take the place of the oxygen instead because it's heavier.
You can use radiator and gas tank putty to seal the tank welds.
It holds up well and is acetone safe to seal your gas tank welds
A good start to a fun project.
Pretty awesome stuff Taryl ... had a good laugh mate cheers
Is that rust remover? CLR with a fancy label on it ? the gray container is identical .
Coooool headlite, Taryl on that BaHa mini-bike, has the 10 hP got a lite-ing mag or coil for the
headlite?
When someone comes in when he’s filming I wonder if he leaves in those teeth or not if not I wonder if he left them in by accident and wondered why he was getting funny looks from the customer lmao
another great video guys, thank fun the info and entertainment
love the Taryl sticker on the tank
Anyone like the song that taryl always plays an it goes like, BRAK FRAN YALLL?
He says "Grass Rats" in the song haha
Never mind. Taryl says its grass rats!
@@TarylFixesAll hahaha BRAK FRAN YALLL
Brilliant video thank u 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
You should check out the mini bikes at cars and cameras made with the 14 horse Briggs on it big block overhead valve motor
Nice calendar on your shirt haha haha
wonder if you could save the excess by putting a little mineral oil or something else into the can? Gently pour it in, over the back of a paintbrush or old spoon? Any thoughts?
Man Alive! That GRILL!
That's right, Taryl; good fit-up is very important when welding.
Nice Job! Great Video too!
Taryl your the greatest ever
You're my new hero.
great job. enjoying your videos, new subscriber here.
+Ozzstar If you haven't already, watch all 3 episodes of Grass Rat's Garage. I found them pretty entertaining.
+kd9bwi i'll check that out, thanks.
What's the advantage of running a torque converter instead of just a clutch?
Much smoother, transfers power more even and no slippage, but is more expensive than cent. clutch.
How about brazing the sheet metal on the tank?
It would have been faster and easier to blast it. But the stuff you used looks just like Muriatic Acid you can buy at walmart for 8 bucks a gallon. But you have to neutralize it with baking soda and water or it just keeps on rusting it later on. And I use RedKote and it work really nice on my gas tank.
Now that's entertainment.
For the most part, Taryl, gas valve is always on the left side.
Hey taryl why dont you bild a front end loader on a garden tractor that would be a cool vidow
Im really good at welderin, but I have a mint condition aluminum gas tank with a chrome cap off of a Hodaka 100
Hi Taryl it is Tony your friend on RUclips
Busch beer yeah right on brother
hey buddy, I have a 2013 craftsman riding mower it starts fine deck is fin but the tractor won't move forward or reverse, what can it be? it was working fine and I stop then it wouldn't move.
can you show me how to replace the pump in a cub cadet rear end? buglemouth1
+Dwight Marshall I wish it was that easy LOL
Hey I have a question l have a 797 Kawasaki FX 730v engine I have a problem find the torque specs for the engine and a 930m can you guys help
You should build a racing mower as a taryl toy!
Oh yeah sweeeet . except for the seat
i want to get tanked too taryl
nice beer cozies
Taryl you idjet put some rocks in that bucket and raise the level soes it covers better...
There are a bunch of cheap plastic and steel gas tanks for dirt bikes on Ama...
SWEET!!!
how do you no when dry Taryld?
The fumes from all that stuff I would have been dead years ago
we tried that 3m body panel adhesive at work but we didn't have any luck with it the 3m rep even insisted we were doin it wrong n since they're right down the street he stopped by n did it, basically the same exact way we were, the way the directions say n still no success, its strong as shit ill give it that, but to compare it to a weld is a joke, im talkin about a real weld, not usin a 120v harbor freight on a cheap 100ft extension cord weldin over top of rust paint n grease with cheap Flux core
Nice Kodachrome gas cap
I'd like to have one of those minie bikes with a 31 hp kawasaki engine on it
just like any knock off the KBS sucks do not buy and use. i had a 1/2 qt in por 15 gloss black did my back bumper sandblasted and use por 15 primer and metal conditioner and sprayed with a binks number 7 gun needed more for front bumper bought a quart of KBS and did the same way and the top coat didn't stick to kbs primer the primer stuck but the top coat didn't KBS said I did it wrong. I've been doing collision work for 35 years don't think I failed there product did and the cassie savior no better
How much for a tank
No one should drink REAL Mountain Dew either. :P
Lol little kid welded it.
the fake gas tank on mine is like is a glovebox
ooops thanks for, being up all night long with a 1 month old will make you type all kinds of weird stuff
"Do Not Drink. Not Mountain Dew."
Mopeds are road legal damn it mini bikes should be road legal.
Hi
Ya shouldaa tig weldered it......
WHY R U wearing a sport jacket? U look good but a sport jacket or suit jacket in ur shop?
I just found an old gas tank
My Ex Wife had teeth like that. I used to feed her Corn through a Picket Fence !!!!
what with those teeth lmao
Them fake tanks
They should have at least put a hose for the fake tank cap to go into the real tank