How To Fix Replace Small Keyboard Key - Toshiba Ultrabook Laptop Computer

Use this video to help you replace a broken key on a Toshiba Laptop. This video will show you how to replace one of the normal sized letter keys. If you need to replace a larger key, for example the Space or Enter keys, refer to this video; • How To Fix Replace Lar... . Check out the FAQ's and Related Video Links below !!
Please remember to Like, Share, and Sub if this video was helpful :)
To Donate, feel free to leave a Super Thanks by clicking on the Heart Button under the video.
Related Video Links:
Get Great Games at Humble Bundle: www.humblebund...
Computer Repair Tools & Supplies: www.amazon.com...
FAQ's:
Q: My Key Cap will not click down in place correctly. What's wrong?
A: If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
Q: My Retainer Clip will not fasten down correctly.
A: If the Retainer Clip does not fasten correctly to the Keyboard, there can be several reasons. The Retainer Clip could be orientated or assembled incorrectly. The Retainer Clip's pins could be broken or damaged. The metal pins on the Keyboard could be bent out of place or otherwise damaged.
Q: Where can I purchase replacement keys?
A: If you break or damage any component of the key assembly, you would have to replace it. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
Q: I have a Key or Keys that are not working. Will this fix them?
A: This video is a tutorial on how to replace a key. If your keys are not working but are not mechanically broken, troubleshoot them as seen here; • How To Fix Troubleshoo... .
Q: The hinge clip came apart into two pieces. How can I reassemble?
A: They fit together with a small plastic pin on the left and right of the inner clip. These fit into holes on the outer clip. To see exactly how the inner clip sits in the outer clip, remove another key cap and copy the clip under it.
Q: The rubber spring came off. How do I reattach it?
A: There isn't really a good way to reattach those. They are not meant to be replaced. Best advice is try to use a small amount of glue. If that does not work, you may have to replace the keyboard.
Q: The Hinge Clip came off with the Key Cap. What do I do?
A: Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.

[@PC_Monkey]

Thanks for watching! Please consider subscribing to my new channel here: www.youtube.com/@jamminpcs.
I'm trying to move the easier hardware stuff there so that I can focus on the more in depth troubleshooting and diagnostic videos here :)

[@lonniehendrickson27]

thank you, this was very helpful

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@Surendran858]

In My toshiba lap top inside the key board the ants are comming so som keys are not working so what to do
And this vedio is soo use ful to me thank u plz give an answer and that key is not working

[@PC_Monkey]

This video is a tutorial on how to replace a key. If your keys are not working but are not mechanically broken, troubleshoot them as seen here; ruclips.net/video/wqrchfpdJ_w/видео.html.

[@maelasohnaindi]

PLEASE HELP! I have a Bluetooth finitie keyboard and the space bar came off 😢 I have been looking everywhere for a tutorial on how to get it back on but no one has this model :(

[@abdelrahmanhafez9712]

ooof

[@abdelrahmanhafez9712]

Hey. I took the letter E out to clean inside and i putted it back, but sometimes it comes off while typing, i also took other letters and putted them back and they are completely fine, and checked twice if smth broke but everything is fine i don't understand the problem... can u help me out?

[@PC_Monkey]

If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.

[@abdelrahmanhafez9712]

@@PC_Monkey Thanks for replying, today i checked again and there was a tinny thing that was a little curved, and fixed it and it works now perfectly. Thanksfor your help!

[@PC_Monkey]

@@abdelrahmanhafez9712 Glad your all set :) Always here if needed !!

[@jennawostyn3271]

my white things wont go back into eachother, how can I fix that?

[@PC_Monkey]

The Hinge Clips? You can see that explained here in this updated video: ruclips.net/video/P_U_VzVxgK4/видео.html