Pioneer GM D9605 5channel power amp
HTML-код
- Опубликовано: 17 ноя 2015
- THE COMPLETE PACKAGE
Pioneer’s 5-channel amplifier produces impressive power in an all-in-one solution designed to deliver big sound without sacrificing space. Ideal for any vehicle including compact vehicles and pick-up trucks with limited real estate, the GM-D9605 also offers installation flexibility for a variety of other applications including boats and ATVs/UTVs.
PACKS A PUNCH
The 5-channel amplifier is rated at 2000 watts max with the A and B channels rated at 75 watts x 4 (RMS) and the subwoofer output rated at 600 watts at 2 (RMS). Compared to similarly priced multichannel amplifiers, the variable crossover networks on the GM-D9605 offer increased flexibility and give listeners more control. Block terminals for a cleaner installation and direct wire contact minimizing resistance.
VARIABLE LOW PASS FILTER
For extra flexibility, a variable LPF makes audio frequency more adjustable according to subwoofer characteristics and personal listening preferences. The GM-D9601 LPF is adjustable from 40 Hz to 240 Hz.
TURN UP THE BASS
The GM-D9605 also features a Bass Boost Remote for optimal bass level adjustment according to listening preferences and music characteristics.
SPEAKER LEVEL INPUTS
What, you DON'T own a Pioneer headunit? Well, we won't hold it against you. In fact we'll even help you build onto your system. The GM-D9605's speaker level inputs allow simplify integration into existing aftermarket or factory installed (OEM) integrated entertainment systems so you can connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you've got a Pioneer amp in your vehicle.
VARIABLE LOW PASS FILTER
For extra flexibility, a variable LPF makes audio frequency more adjustable according to subwoofer characteristics and personal listening preferences. 
Авто/Мото
Per Dean's request, I bought this amp and the similar Kenwood 5ch and will test and compare both soon! 5ch amps are a great and clean way to power a complete system, but we will see how they perform vs rated.
BigDWiz waiting on your review before I purchase big d💪
Which one do you like better?
Yo yo whats the results
Hello, On gain control do you recommend to set the amp at H setting since the RCA preouts are 4v on the pioneer AppRadio 4?
Question. I recently bought this amp with a pioneer hu and I now can't control fade using Eva outputs on hu. Does this amp allow you to retain fade/balance controls?
Could i run a Bluetooth dongle (rca type) and a factory radio through a lc7i with one of these amps ?? If so what would best set up be
Rookie question but for the sub output on this type of amp do you remove the rca ends and just put the wire in the output jack?
Thank you for this video!
Your comment on generating at 2:26 and autofilling at 2:58 is not in the manual.. Just saying. Or if it is I missed it.
My head unit does not have RCA. I have a PAC Amplifier integration interface AOEM-GM1416 converter but it only has 4 RCA outs. That's why I bought this amp to give power to the subs.
Actually there is a question, which way is better, using the interface or the SP input?
And I have heard of this amp popping and hissing, have you experienced either of these?
1983 Chevrolet Impala Sedan (box chevy)
Kenwood KDC-BR568U single din bluetooth cd player with built in crossover.
2) Clarion 30 watt rms 4x6 3-way dash speakers
2) Clarion 100 watt rms 6x9 5-way rear deck speakers
2) Clarion 300 watt rms 12" single voice coil subwoofer
1) Pioneer GM-D9605 5-channel amplifier
I am considering adding 2 more 5-way 6x9's. Is it a way to wire all 4 6x9's into the rear channel of the amplifier, and maintain a 4-ohm load. I am trying to keep a single amp system, while slightly increasing my vocals & midrange levels.
Also, would adding a Clarion EQS755 7-band graphic equalizer / crossover be a beneficial addition to my setup, or would it be "fighting" with the Kenwood's built-in crossover?
Any advice you guys could offer would be greatly appreciated. I respect your knowledge, and love the work you do.
What would be the best frequency to set my jbl 6.5 coax and my jbl 4x6 coax.....I'm also running the pioneer tsa300b loaded enclosure.....what frequency should I tune the amp for that. I'm also confused where to put the db slope.....thank you for your time
Will screwing the amplifier directly at frame create noise ? If so what can i do. I'm replacing my factory amplifier at the passenger rear cargo bay of the car.
Does the impedance of each channel need to be the same? Can you use this amp to power four 4ohm speakers and one 2ohm sub?
Are there any proprietary advantages to using a pioneer amplifier with an AVH deck?
So I can run all 5 channels just by connecting the front off the dash to A?
Thank you! I really do appreciate all your help. Frank G.
You bet, anytime
Hey guys thank you for all that info
I have a 2013 f150 I'm planing to upgrade that sound on it but I want to keep my stock radio.
I'm planing to replace all the doors speaker with pioneer 6X8 TS-G680 all hook up to GM-D9605 amp I also wanted to put a subs to it
the pioneer 2-TS-SWX 2502 or 2-TS-SWX 3002 my question is can this amp handle all this also if it does should I go with the 2502 or 3002? Or should I just used one of the 2502 or 3002 any help I can get it would be really appreciate
Is this amplifier good to power a pair of Pioneer TS A1376R. And a pair of TS A6996R and a pioneer TS SWX2052 10 inch?
Can you guys please explain as to why the bass knob has to be plugged in the Pioneer Champion gmd 9601 mono amp
I have a 2018 mustang 9 speaker system can I use this amp on all these speakers and one 10inch sub. Making overall 10 speaker setup?
What gauge of wire i will be use por connect my subwoffer pioneer TS-A300D4 (sw)?
Can this work with all 4 door speakers and 2 subs ?
I all ready ordered skar 6.5 at two ohm my plan is to run two 9605 amps bridged and use the sub outs for two more skar evl 10" I have 4 10" evl skar on 4 9601:) .....skar 6.5 at 2ohm rms is 200 with the first door speaker install today it's sounds good to me anyway my ? Am I working the amp to hard on 2ohm bridged to get my 200 rms then use a the sub out to a 10" evl 1000 at 2ohm (ps with two 9506) and I'm new to this should have got two 4 ch but I'm stuck with it lol thank you
Could I use this to power an 12" alpine type R sub, along with 2- JBL GTO629 Premium 6.5" Co-Axials, and 2- Kenwood Excelon KFC-XP6902C 6"x9" Component Speaker System?
Just bought this amp thanks to you guys. installing it on my hummer H3. Pioneer D9605 + Rockford Fosgate T1650 Power 6.5" 2-Way Full + Rockford Fosgate T2652-S Power 6.50" Aluminum Component. What 8" Sub should i use. PS. I love bass. ANy recommendations??
Would I be able to run 8 - Pioneer TSM800 8” Pro Mids with this amp?
Quick question if I run the door speakers at 4ohms can I run the sub at 2 ohms
Can I set this amp to use one set of rcas to power front and rear channels
Whats the best amo wire kit especially for this amp?
hey guys love the channel, can you do a video explaining powered subwoofers preferably the infinity basslink sm shallow mount.
Do you run both channel A,B, and the sub channel? Or do you run A or B and the sub.
I want to Play Two JBL 400 Watts Component Speakers & One JBL 1300 Watts Sub Woofer,Which will be the best between Pioneer GM-D9605 & GM-D8604 ? Plz suggest with reasons.
Great video, thanks for the information. The manual states that when using three channel bridge mode you can only use 4 and 8 ohm loads. Does this also apply to the sub out when in bridge mode or can I use a 2 ohm sub? 4 is ok in that I am more interested in signal quality over raw power and volume. Thanks again.
john turner yes the sub channel can do a2ohm load in 3channel mode.
Quisiera ponerle una 12" que sea pionner, que tipo de bocina me recomiendan? Gracias.
hi have the pioneer mono amp and thinking about getting the pioneer 4 channel amp. Would it better if I sell the mono and just buy this 5 channel amp? Thanks
I have this Amp hooked up A(tweeters)+B(6x9s)+Sub with all three RCA inputs coming from a Pioneer head unit. For some reason, I get NO SUB output. I did get sub with only A feeding all speaker outs, but not with A+B+sub configured. Any idea why no Sub? (Sub speaker works fine. Fuses and wires are good.)
Did you figured it out?
Hey would this power a 2005 toyota Sequoia door speakers and a 10 inch amp ?
In my just installed setup I have a set of coaxial's powered from channel A. I have the "lpf/off/hpf" switch to off. Does the Frequency knob then become irrelevant since I'm not trying to cut either the highs or lows to this channel or does it still play a role in the overall tuning of this channel. Also I'm trying to understand the slope switch on the SW channel. Thanks!
Joshua Skversky if set to off yes the frequency knob does nothing. It is know much of the frequency you want it to stop playing and at what level. Example at 80hz 12db it is still play 100hz it is just at a lower volume. If it is set to 18db it will be at an even lower volume. There is no right or wrong just what sounds good to you.
do i have to use the 4 channel high-level input plug if I'm running the speakers straight to amp? and also isn't this amp 2000 watts 5 channel? I'm going to run 2 front door speakers and two REAR side speakers and a 12inh kicker woofer. I was told that this is a great amp for that. please let me know ASAP. Thank you
No you would not necessarily have to use the hi-level input plug. This amp has a maximum rating of 2000 according to Pioneer which is essentially meaningless. A far more accurate way of gauging an amp is to look at the RMS rating or continuous power handling. Which for this am is 4 x100rms at 2ohms, 600rms sub at 2ohms or 4x75rms at 4ohms, 300rms sub at 4ohms. It should be able to power a kicker l7 but the kicker l7 12 would be somewhat underpowered by the sub channel of this amp. Either look for their lower ranked offerings or a Sundown E series or similar rated sub might be more suited to the output of the sub channel for this amp.
Great Video! So I'm hooking this amp up to a JL 2W1v2-4 and I am looking for 6x9's and 6.5's for my 07 Sienna. I noticed the amp does 75x4 @ 4ohm and 100x4 at 2ohm. Can i wire it so my fronts and backs run at 2ohm-100w while the sub still stays at 4ohm and ~300w (Which is right in my JL's wheelhouse )? It might be nice to get another 25w out of each speaker right? Plus that changes the price point on the speakers I need to buy.
can anyone confirm this?
Curious. Alot of these pioneer gm series amps can handle 1ohm on the sub channel. I know the manual doesnt say 1ohm stable. I also want to mention that when ive tested these pioneer amps the bass knob seems to just be a bass boost knob, not a full voltage control.
Hi, sorry to comment on such an old message but have you noticed any difference in bass knob from the gm-d9605 and the gm-d9705? my 9605 amp has a 6 pin connector while the pioneer knob i have has a thinner 4 pin profile. I suspect I have a knob for the 9705 but i cant confirm. also, in your experience, I know the general consensus is to not use bass boost but 5 star had another video where he said that even if you dont use the knob on this amp, you HAVE to have it at least plugged in in order for the amp's bass output to sound good. can you confirm that?
I have the updated version of this amp (9705) and I have a LC7i connected to it. Is there a MAX input level I can send to the amp? (I chose the LC7i for the AccuBass feature). For some reason when I turn the output of the LC7i up AT ALL from it s lowest settings while the gain is at its lowest setting on the amp, I get a really bad noise, like its over driving the input to the amp. The more I turn it up the worse it gets. Even with the system volume at 0. For now, I have the LC7I outputs turned all the way down, and the gain on my amp UP. From my understanding, this is exactly backwards. I can play it just fine with very minimal noise for now, but would like to make sure I'm getting the cleanest signal/sound possible. Help? (Good wires, and triple checked grounds.)
hi, did you ever get this figured out ?
im upgrading the so called "premium pioneer factory system" with actual premium pioneer speakers and this amp. i decided to keep the stock head unit and factory amp after viewing your videos on the Lc7i. very very informative videos... as for the speakers, im getting the pioneer ts d1730 6 3/4 for the front and rear doors, ts d6902 6×9 in back and a tsswx2502 sub. [ for the rear doors, only using the 6 3/4 woofer for more mid bass, no tweeters ] . will this amplifier be able to handle all these speakers? ..
Omar Thomas yes it will power them just fine. I would suggest putting all the 6's on channels 1-2 and the 6x9 on 3-4. That way you can have the crossover play lower for the 6x9 and get more mid bass.
Hey guys, thanks for all the great the info. I'm running a new Sony MEX-XB100BT deck with this new pioneer amp. Running rca's to each channel... A,b and sub. Have the sub input select to SW. Having trouble getting the sub to work? All connections are properly set up. Wondering if it has to do with either the gain, frequency or slop adjustment? Any tips on where those adjustments should be or if I'm doing anything wrong? Thanks!
What kind of trouble are you have? No bass, sounds funny ? It sounds like you have the amp set up right. A good starting point is 80hz, also make sure you plug in the bass knob. You don't have to use it just plug it In turn it up. The bass knob is an EQ for the amp and with out it the amp sounds very flat.
NICE..
I plan to use the stock head unit, with this amp will I need an audio control like the LC7i?
MrCeez1 only if you want the best hi to low interface between you radio and amp. The amp also has a hi to low built in.
Dean or anybody, does this amp have a high noise floor? I heard some of the latest pioneer amps have a noise issue. If it's dead quiet I can see me running a pair of these with the sub channels running my front midbass.
I’ve had this amp for 4 years now pioneer head unit rockfordfosgate up in the front doors ,KICKERS IN THE BACK DOOR BUT WHAT MAKES THIS SYSTEM are the TWO 10” fosgate punches under the rear seat
Very nice, I love it
but today I’m about to look for what I think is a ground issue making buzzing
then I read your comment
so I will now get my amp off the floor and look for a ground issue , good looking out
You guys are great! I have a question about my install. My HU is a pioneer DEH X6500BT. Currently I have installed 2 10" pioneer ib flats wired at 2 ohms on a mono block pioneer 8601. I've recently purchased Image Dynamics 6.5 100 watt rms component's with crossovers for the front and Image Dynamics 6.5 100 watt rms coaxials for the rear. Everything is strategically sound dampened and I've used ofc 4 and 12 gauge for the system. I want to ditch the mono block amp for this one but, my HU only has a pre out for the sub and a pre out for a front channel. I believe you somewhat covered this senerio but, could you please inform me if this amp is for me, how to set the AB channels and is 16 gauge adequate for all my Image Dynamics? Sorry about the long question or questions. It's my 1st stereo build. Thank you kindly in advance for any help you can provide.
+Drum Tech yes this amp will work. You would use the front and sub input. Turn on the ab switch on so the front feeds the rear input. The wire is a perfect size. 👍
Five Star Car Stereo Thank you
What is frequency measured in those things?
How do you think this amplifier stacks up against an older JBL gto-5ez. I bought the jbl due to it being very well rated on the forums, and it has gobs of power (rated at 500X1 rms for the sub channel) but it benched at over 700!! Unfortunately I lose one of the front channels and now am looking for a replacement.
The JBL sound like a monster. No this guy is not on this level. You might want to look at the Alpine PDX-V9 it is more inline with those kind of numbers. It also sounds really great.
Whats is the s control connector for?
looking to run 4 New Kicker 41DSC6934 D-Series 6x9" 720 Watt 3-Way Car Audio Coaxial Speakers. now looking for 1x 12" sub can I get a sample please?? also need help knowing if all of this will run thanks awesome video !
VERY DETAILED REVIEW...
stillrumone thank you
Five Star Car Stereo can you do a video review of Rockford Fosgate 5ch. amplifiers.. I looking for the RF-P1000x5?
Edrick Mendez yes but it would be a while, is there any questions you about the amp.
Five Star Car Stereo my only 2 concerns are that I have a pair of Punch P1675-S for "front" and Rockford P1675 "rear" their rated 55 to 60 watts and the RF-P1000X5 are rated 75 x 4 its this will be to much for the Speaker to Handle..and the 5th channel I'll be installing a P3D2-15 to give it @ 1 ohm 500w rms.. it this will be under powering the sub..or I have to get the P2D2-15?
Edrick Mendez no this amp will be perfect for your system. The speakers will eat up that power no problem. Remember you are going to cross them over( block bass) that will increase there power handling. The p3 15 will is the right woofer for the amp, definitely not a P2.
About to purchase a POWER ACOUSTIK RZ5-2500D 5ch. amp,what are your guys opinion on this amp? im running stock stereo after market door speakers and 1-12inch kicker comp 4ohm i think peak power is 400watt and also i have a clarion eq hooked up.the price on amp is good on my budget but herd bad things about brand.advice please!!!
You heard correctly, save and get the Pioneer. You will not be sorry.
Can this power a w7 10 3ohm ?
This seems like a new amp, very interested in it having just taken a GM-D9601 out from under a seat looking for a 5 channel to replace it. One amp for everything would be nice. Have you bench tested any of these amps for output?
For actual power no, we put a few in and have not been disappointed. Yes it is a new amp, about 2 months old. Thank you for the question.
Hi I'm running 2 polk mm6501s rated at 125W RMS and a 12" Pioneer TSW3003D4 Champion Series Sub @ 600w RMS. Will the bridged option 200W x 2 RMS be too much power for my front speakers? I would appreciate a reply thanks!
You should be fine. Make sure your xover and gain are set right. Tune them with the sub unplugged so you can hear any distortion or clipping. When they should right plug the sub in and do a final tune on the sub.
would this amp be able to move 75 watts ( rms )x 4 plus a single sundown SA 12 rev 3 (750 rms )??? please answer .thanks
It can do the job with no problem but if you intend to match max rms then you're gonna need to spend more money on a more capable amp!
I have 110W RMS Front component speakers and 90W RMS Rear component speakers with 400W RMS sub-woofer. Will this configuration works well with this amp?
I appreciate you help Frank!
Yes it will have the power to make your speakers perform great.
Would this be a good amp to power 4 6.5inch door speakers and a Kicker L7 12 inch sub?
Chris Brommund I had a soundstream 2000 watt powering 4 door fosgate speakers and 2 kicker 12 inch cvrs so I’m pretty sure you’ll be good.
In terms of both build and sound quality, would I be better off to spend my money on something like an alpine pdx-v9? This amp seems almost too affordable.
+Andrew Burke it is very affordable, but no comparison to the V9 in sound and performance.
you mean the V9 outperforms the Pionner?
Do you think these would work for 2 JL W3 as far as the 5th channel is concerned? I know some amps are under rated that's why I'm asking
Khalid Mohammed this amp is not under rated. We use it to power 2-CompR 12s woofers all the time.
I am using it to push two JL W3 10” at 2ohms and trying to see if using the D9601 would gain me that much more as they sound more like mid bass drivers. Trying to get Deans opinion. I haven’t been using the bass knob, boost off, gain at 11oclock. FWIW.
@@45eno If you still arent using that bass knob would you be willing to sell it? I cant find one anywhere. thanks!
I am installing this amp with alpine sps610 components (front door)and coaxial(rear) in a 2012 toyota highlander non jbl, my question is can I run factory wire from the amp using the 6.5 driver in the front door and the tweeter in the dash where the 3inch normally sit, is the factory wiring in series or parrellel, I'm hoping not to have to run new wires. Thanks for any help you can give.
xlthumper the wiring is in parallel. The Alpine speakers crossovers are for each speaker, not a central box. This mean you can install the speakers using the factory wire if you want. There will be not problems
Five Star Car Stereo excellent thank you very much for the help, great videos by the way !
xlthumper im using the same speakers in a altima lmk how it sounds
TheRiddla36 as soon as it's all in I will
Just purchased this amp. How do I get the 100x4 at 2 ohm and 600x1 at 2 ohm? The manual tells me that I cannot wire two 4 ohm speakers in parallel like I would need to in order to get a 2 ohm load at the amplifier. Thanks!
You can only do it in a stereo configuration, meaning with 8 speakers. You could also run JBL or Infinity 2ohm speakers. The best choice is to just run it at 4ohm, it is a class D amp and they sound like crap a 2ohm.
+Five Star Car Stereo thanks ! It is much simpler to keep it at 4 ohm as I have it. Good to know !
Help! I want to run 4 speakers and 2 subs, 75&80 watts at 4 ohm, and then 300watts rms at 4 ohm, can I run this amp with the speakers 4/4, and then bridge the sub channel? Or will that not have enough juice for the subs? Many, many thanks.
Pioneer TS-A652C, Pioneer TS-A652C, and 2 PIONEER TSSWX2502
good review! Would i be able to run pioneer 1xTS-B400pro and 2x TS-M650Pro as well as a small sub off this amp entirely?
silentknight1402 yes, it would run that just fine. Add a 12" and your killing it.
Thanks!
Just to confirm....2X 12" TS-SW3002S4 is good to go with this AMP? Thank you
Blake Biltwell yes
Can i use 4ohm speakers and 2ohm subwoofer in the same time with this amplifier?
ايه تقدر عادي
Asking for the same question here
@@erikaditya4896 yes u can 😊
I like this amp just wondering if I can run six 6 1/2 75 rms and two 6x9 110 rms with this amp Im not running any woofers not sure if it can be done didnt want to go with 2 amps
The 4 channel might be better, you can run 2 speakers on each channel
Great video guys. I do have a question.I install this amp to a pioneer 4200 nex double din but I'm having trouble with the bass knob. I have it connected with all inputs. Front rear n sub out. But bass knob isn't working. In order for me to use the bass knob. Do I have to use only A n B ??? Please help I want to use the bass knob on the amp. Thank you.
alfonso mendoza the bass knob is for boost control not volume. You have to use the subwoofer control in the radio.
Five Star Car Stereo thank you for replying. The problem is the bass knob doesn't do anything.
alfonso mendoza you may have the gain up to high, try lowering it and see if it does anything
Five Star Car Stereo. I will try that thank you.
Hi mate, make a video for alpine pdr v75 chanels
So with a PIONEER DEH 80PRS I would run the 3 sets of RCA's and that would power all my speakers in a Trailblazer?
Niko Bellic do you have amps?
No not yet im still planning. I have a trailblazer w bose stereo, it sounds great so I think all i need to do is add a sub. Im going to be installing the pioneer deh-80prs head unit
Niko Bellic if you are planning on keeping the Bose, the 90 is a bit of over kill. Most of the things that make it great will list on the Bose system.
I bought this amp and connected speakers using the sp input (no rca) and connected one subwoofer to the sub input, now my speakers all work except for the subwoofer, do i have to connect it to the output or how do I get it to work
There is a switch on the side ( a/b or sw) switch it to a/b. This will tell the amp to use the 4channels of input to create a sub channel.
+Five Star Car Stereo Inc. thanks i figured that after playing with it for a while
+Kevin Sahib cool I hope you like it enjoy
what plugs would you use to run front speakers and rear speakers to this amp my son has it hooked up but I think they're all hooked up to the front speakers
What type of car is it I and what type of radio does he have
2011 camry and the head unit is a pioneer2800bs
There are 2 plugs behind the radio they come has a set, BHA-1761. One plug is front the other is rear.
if my head unit only has two preamp rcas do i need a third for the sub
No you would not need additional outputs.this amp can create a sub channel using your two rca outputs from your head unit
can this amp run 4 speakers at 4ohm and 1 sub at 2ohm ?
yes, it will be OK that way.
Brian watson can I do the same with only 2 preamp outputs in my radio, I don't have the S/w and rear speaker outputs on my radio
I installed this amp in a 2012 Mustang GT with a Shaker 500 I works great I hooked up 4 speakers through the speaker input and wired a system remote to the antenna and with or without the remote it will not turn off. It stays on and drains the battery. Any idea how to remedy this?
The amp has an auto turn on for remote when using high level. Has it killed the battery yet? The amp should go to sleep a short time after all the doors and trunk are closed. It will stay on if they are open because the radio puts out a low amount of voltage to the speakers that tricks the amp to stay on. If you open a door or trunk the amp will turn on. The only way to stop this is to go with an out board high to low.
+Five Star Car Stereo The battery did die originally but that was due to an issue I was having with the door locks not locking but that is now fixed. I has been fine. No dead battery. It was impossible to tell that the amp was going to sleep because every time i open the trunk it was on.
I have 110w rms@4ohm pioneer component speaker for front.& 75w rms@4ohm rear speaker and 200w compact pioneer subwoofer.can I use this amp.how I connect ?.i am not sure about connection to speaker?
yes you can
Hey guys thanks for all your review and install videos they really good, I need a little help with a system I've got, can you please tell me what the best way to install the d9605 amp + d9601 amp with 2 Tsw 1200 pro subwoofers + 2 Ts 6900 pro speakers + 2 Ts m650 pro speakers + 2 Ts b400 pro speakers + 2 Ts b350 pro speakers? I've brought these to install in my car I'm going to build a ported or enclosed subwoofer box in the trunk, your input would be greatly appreciated thanks.,
HEMI Six pack so you have a ton of good stuff. What type of car do you have and what is your plan so far?
Five Star Car Stereo, I've got a Chrysler valiant VJ sedan, Im just in the planning stages but I have a plan to have Ts m650 speakers in the front doors the Ts b400 in the rear doors and b350 up front in dash with the 6900 in the back window shelf , because I don't know much about amps and speaker set ups I would like to have your advice on how to wire up the amps to speakers and if you think I can make it work? I have a pioneer deh-x3950bt head unit simple but it has all I need I think? Thanks for your time guys.
Hi,
Can anyone advice about the sub to be used?
I have all 4 speakers installed, front as of component and rear full range 4 way speakers using amp, for sub channel, waiting for sub to be selected.
faisal shaikh you may want to look at the Rockford Fosgate P2 1-12 box or the Kicker CompR 1-12 box. Both will work great for you
what about the spec for sub
faisal shaikh they both handle the power the power that amp puts out. Put if you would like to know more they do list that information on there web sites.
did it miss the price of the amplifier?
Hi, So i have been doing some research and I guess I should have ask you guys first? The Pioneer GM-D9604 Amp...has this product been released yet? I can't seem to find it anywhere...even Pioneers Amp page shows no results other than the GM- D9605. which shows "NEW" next to it. If you have any pricing and availability on it that would be great. Thanks frank G.
My bad, it is the 8604 not the 9604.
Lol! I thought so....just wanted to be sure. Thanks!
Lol! Waiting to get blocked from you guys. So many questions that I can't seem to get from around my area. :( So now that I have my new Pioneer AVH-X5800BHS installed (Upgraded from my Pioneer AVIC-N4) I am looking to replace both my MTX Amps. 4ch rear RCA not working and gain is having problems...The sub amp is fine, but I am looking to replace both with smaller foot print versions. Not looking to blow the windows out...both amps now did a great job of rocking the outside mirrors. I am interested in your best thought on weather to go with the MTX or how do you feel about the Pioneer units and which ones would work nicely for my application? I would like to keep the setup ( "Brands") to either match the Head unit or the sub. Don't want to go cheap, but I also can't break the bank. Quick run down of whats in the truck now.
MTX Thunder 564 4ch, 70 watts RMS x 4 at 4 ohms
140 watts RMS x 4 at 2 ohms
280 watts RMS x 2 bridged output at 4 ohms
2-, 3-, or 4-channel output
4-ohm stable in bridged mode
Tri-way capable (Tri-Way crossover required)
requires 4-gauge power and ground leads - wiring and hardware not included with amplifier
PWM MOSFET switching power supply
variable 50-200 Hz high-pass/low-pass crossovers (12 dB/octave high-pass, 24 dB/octave low-pass)
ThunderEQ bass boost (up to 18 dB at 40 Hz)
MTX TC4002
RMS Power Rating:
4 ohms: 100 watts x 2 chan.
2 ohms: 200 watts x 2 chan.
4 ohms Bridged: 400 watts x 1 chan. Speakers are all Polk Audio.Front DB690...300 Watts peak/100 Watts RMS, Rear-DB650..180 Watts Peak/60 Watts RMS. MTX Thunderform W/Two Thunder 4500 Subs 10" 4-ohm, Power range: 50-225 watts RMS Peak power Handling:450 watts. I also have a set of Polk Audio DB351...105 Watts Peak, .35 Watts RMS, brand new in box...that I would like to put up in top part of dash...but not sure how to hook them in to the system? Thanks guys! i appreciate all your time...making the vid's and answering questions. Big fan of yours! Frank G.
Ask away, it's all good. We sell and install a ton of the Pioneer amps, they do not disappoint. The 4channel GM-D9604 would be a great replacement for your old 4 channel. The 5 channel is very nice, the sub side is good for a pair of 10's or a good 12. My personal favorite 5 channel is the Alpine PDX-V9
I will be looking into the GM-D9604. Thanks! Not sure if you read the last part of my last post? I was interested in installing a third set of speakers Polk Audio DB351- 105 Watts Peak, 35 Watts RMS. that I would like to put up in the empty speaker holes on top part of dash...but not sure how to hook them in to the system? Would I need another amp to run them or some kind of cross over unit? Thanks as always. Frank G.
+Frank Gagstetter sorry, you can run those speak with the door speakers just fine. They will need a xover or bass blocker on them. A 47mf cap or a bass blocker for a 3.5" speaker will work.
Which gauge wire do you use for the remote signal? Thanks
+the Freeman 18 awg is normal
Can this amplifier power a pair of 4ohm Alpine Type R 6.5 components, a pair of 4ohm Alpine type R 6x9s and a Rockford Fosgate P3D4-12 Punch @ 600 watts rms on the subwoofer channel?
Mr. Mention yes, it should have no trouble doing that.
Yes. I have all Type R speakers: 5.25, 6.5, and 12 inch sub on this amp. The sub gets more than enough power... so cool to do this all with one amp.
as of right now I am using a Xtant 603 amp its powering my door speakers and subs I just ordered Pioneer TS-D1730C for the front doors and TS-D6902R for the rear doors my subwoofer is the Pioneer TS-3003d4 and was thinking of changing my amp will this amp benefit me? TIA
Jose Arana wow like an original old school amp, very cool. No if your amp is still working and is giving you no problems keep it. It will sound way better.
thank you for answering and yes it still works perfect i actually hit 144.7 db with it on 2 pioneer 12s in 2005
Jose Arana I always called them the Science project amps because you could remove the hole top. Very nice
once again thank you for responding, only reason I've thought about changing it up is because the amp isn't pretty like it was before and I show the truck a lot at shows and was thinking of revamping my setup but I really like this xtant amp
Jose Arana if you really want to get something new check out the Alpine PDX-v9. I know it is not Pioneer like your other equipment, but it will be more like your Xtant.
can this amp run 2 kicker 12" comp rt subs rated for 500 watts mrs each?
+Dagan Ardoin I would be on the minimum side. I personally would go bigger
How's the pioneer Gm-D8604 thinking about getting one thank you
Lots of power in a small housing at a great price
hi, thanks for nice video.
I bought this amp, 2 pioneer speaker TS-A1686R and pioneer tweeters TS- S20 . I install channel A to speaker and channel B to tweeters, but after 2 days tweeters stop working. could you help me to fix the problem and show me how to wire tweeters to amp.
thank you
Pooya Rahbaran chances are good you may have blown the tweeters. Typically you would run that type of tweeter with a midrange or coaxial speaker. If you want to run them on there own channel you would want a beefier tweeter. Did you use the crossover that came with the tweeter?
yes I used the crossover and I put the volume very low and the amp set to HPF.
I think you mean component speaker. should I use two-way passive crossover?
Pooya Rahbaran no you can have a coaxial speaker and an add on tweeter on the same channel. We do it all the time when a customer wants a little more treble, 4 tweeters are loader then 2.
which speaker size 61/2 do you recommend?
and how should I connect the second tweeter? (series or parallel)
thank you so much for your help
Does Anyone know if its possible to run two 10inch clarion subwoofers off this amp.
What ohm load are the 10's
You said when bridging, you would get 200x4 (around 6:00 in), you must've meant 200x2? Thats a ton of power for the front speakers, should push my new Alpine SPR-60C's pretty nicely! Thanks for the great breakdown.
Shawn Blais yes, good catch. That would definitely be nice though.
Can some one advise me if this amp would able to run a pair of Polk DXi 6501 components, Kicker DSC 6934 6x9s at 4ohm and RF P2 D4 dvc at 2 ohm?
Omair Khan this amp would do it. Alpine makes the MRV-V500. Rockford R600x5
Five Star Car Stereo But both Alpine and RF amps don't make enough power as compare to Pioneer.
Omair Khan tire they are similar in price, but the Pioneer has more power
Five Star Car Stereo Thanks for the replies.
hi my friend . how can i wire LC7 i by audio control to this pioneer 9605 amp ?
What mode are you running the LC in? Here are some video on the different installations of an LC
ruclips.net/p/PLA1LIIrpw0quF2_iChnJrVL_FTjhIuNZM
Hi dear my friend. Thank you for your quick response. Actually I'm running front and rear speakers with 8 inches factory navigation to LC7 I and Getting 6 channel out from it to my five channels Pioneer 9605 amplifier.
Can I run two Pioner TS-W3003D4 @ 800 Watts RMS
1 OHM?
Jake Eitel it will only do a 2 ohm load not a 1 ohm
That sub is only rated to 600 W RMS, anyway. I wouldn't put 33% over-capacity into a sub. In fact, the 9605 discussed here is an absolute perfect match, as it puts out 600 W RMS at 2 Ohm.
wii it b able to hande 4 speaker 350 W and a sub 1400 W?
Fardeen Ozeer the amp puts out 75x4and 350x1 at 4ohms
It puts out way more than that . It's an incredible le amp and if you use a dsp . Your system will sound like its hiend
Hey guys, I have a Pioneer Gm-D9605. Would yall sell me the 8 pin Sp Input harness plug & a Bass Knob/ Cable? How can I message or get ahold of you? I need 1 ASAP! Please help!
can u run a 3 way front stage using this amp
No it only has 5 channels, you would need 6 for that.
Is it one omh stable on the sub channel?
No just 2ohm on the sub channel
2 ? can i run 2 12" subs at 2 ohms at 600 rms and 4 4 ohm speakers at 75 rms can this amp do that jw
Yes it will do that just fine. It will be 300 watts per sub so nothing crazy. 2 basic 12s is what we typically do, for example a 2 Kicker Comp 12 box works.
+Five Star Car Stereo ok cool ty i was gona go with 2 of this sub idk if u heard of the brand but its good prob go with the 4 ohm wire it down 2 2 ohms or maybe the 2 ohm not sure yet heres the subs www.sonicelectronix.com/item_91778_Pair-of-NVX-NSW124v2.html
+TechPcGamer give it a go the amp will power them fine.
which gauge wire size nice for power wire?
Muiz Rahman we run 4awg ofc
what is the best speaker to match with this amp.
Redondo Cenon any speakers with 100 watts rms
and a sub with about 400watts rms
It can do 600rms @ 2ohm... why not get 2 tens @ 300watts @ 4ohm and wire them in parallel for a total 2ohm load and 600 watts RMS? I'm looking at the TS-W256R's from pioneer which are exactly that.
Can this AMP power up 2 X 12 inch pioneer TS-SW3002S4 OR 2X 10 inch pioneer TS-SW2502S4 OR just 1X 12 inch pioneer TS-Sw3002S4
Blake Biltwell yes it will. I was thinking no, but we did one the other day. It sounded great.
Five Star Car Stereo can I use 14 gauge subwoofer wire with this AMP and sub setup?
Blake Biltwell yes if it copper it should work fine.
HOW DO YOU RUN 2 10S OFF OF IT???
Same way you would with a mono block amp. Just wire the subs to a 2 or 4 ohm load and connect to the sub channel at 2 ohm you will get 300 watts to each and still have the a and b channels to either no amp your components. Or bridge your front speakers or amp all 4 speakers