Awesome video, easy to understand and great camera work/angle. If you could do a video on complete valve adjustment process with removal of gas tank/cowlings/radiator, it would be a incredible resource for us. Love my XTZ 750.
bonjour , très bonne vidéo SAUF que il y a un joint TORIQUE au niveau des deux cylindres non représenté sur cette vidéo ,je me demande à quoi ils servent , il y a t-il une personne qui pourrait me renseigné si il sert à quelque chose ?et indispensable
Wonderful video !!! I have to change the shift forks and from the video I noticed that it is possible to change the shift fork C... My question is if it is possible to change the 3 forks on top, without having to disassemble the entire engine? Is this possible? Thanks for the video and for any help...👍🏻 
It is possible by removing crankcase cover, both lateral covers, clutch, drive sprocket and protection plate , shift cam and you should have access by the top to the forks.
J'ai fais mon embrayage grâce à la vidéo, mais j'ai une question il y a un disque d'appui en fond de cloche il faut bien repartir quand même avec un autre disque lisse?(Ce qui fait deux disques lisse a suivre ?
You can measure your valve clearance after cam sprocket tightening (23:30) and after if necessary to change pads you have to come back to the step of valve lifter installation (21:30) and repeat until your clearance is good on each valves.
Sou brasileiro e vc me ajudou muito com este vídeo
Muito obrigado Deus abençoe sempre vc meu irmão
Merci, grâce à ta vidéo j´ai réussi à faire point de ma 750 et ça démarre au quart de tour🎉
Great video. Not for begginer, but for someone who has done this on other engine is a great guide. Thank you for your effort!✌️
voce deu uma verdadeira aula de mecanica, agradeço
Excelente trabajo palante
Thank you so much for makeing this video! Helped me soo much ❤
Sensacional seu vídeo. Parabéns pelo trabalho. Abraço
A pleasure to watch 🧐🤤
Awesome video, easy to understand and great camera work/angle. If you could do a video on complete valve adjustment process with removal of gas tank/cowlings/radiator, it would be a incredible resource for us. Love my XTZ 750.
You are several to ask for it, I will do it
Complimenti. Bellissimo lavoro
La video que je cherchais depuis longtemps !!! Je vais enfin pouvoir m'attaquer a mon moteur plus serainement :) Merci pour le partage !!!
Bien passé ? moi j'attaque mon 3LD aussi..
De mucha utilidad tu video 👏👏👏🙌🙌🙌
very nice job my friend congratulation!!!
No valve adjustment????
It is only a video of assembly, i didn't include in the video all the controls needed on the engine. I did/will make specific videos for that
Amazing work, thank you for sharing your Knowledge
Thank you! Much appreciated!
Thank you for sharing!
grazie ;)
These is a full video step by step ?
awesome video
I need yamaha super tenere750 carburettor to buy
magnifique et surtout très très loin de mes compétences mécaniques ...
bonjour , très bonne vidéo SAUF que il y a un joint TORIQUE au niveau des deux cylindres non représenté sur cette vidéo ,je me demande à quoi ils servent , il y a t-il une personne qui pourrait me renseigné si il sert à quelque chose ?et indispensable
Wow... so useful, thanks! This is the best motorcycle I have ever had, I will subscribe in case you upload more information.
Please...a little help...😄
Wonderful video !!! I have to change the shift forks and from the video I noticed that it is possible to change the shift fork C... My question is if it is possible to change the 3 forks on top, without having to disassemble the entire engine? Is this possible? Thanks for the video and for any help...👍🏻

It is possible by removing crankcase cover, both lateral covers, clutch, drive sprocket and protection plate , shift cam and you should have access by the top to the forks.
@@ttcmotorcycle Thank you !!!🤩👍🏻
Good good job !!!
J'ai fais mon embrayage grâce à la vidéo, mais j'ai une question il y a un disque d'appui en fond de cloche il faut bien repartir quand même avec un autre disque lisse?(Ce qui fait deux disques lisse a suivre ?
when adjusting the valves ?
You can measure your valve clearance after cam sprocket tightening (23:30) and after if necessary to change pads you have to come back to the step of valve lifter installation (21:30) and repeat until your clearance is good on each valves.
original crankcase from xtz750 can fit all the engine parts from 4tx tdm 850 engine? can u confirm?
I don't know...
Yea, it's fitted.
Do you have any website to buy parts for the engine of this motorcycle?
I bought my parts mainly on Wemoto.fr and Kedo.com
amazing ！ wonderfu！！
super