How to make drill bit - fusion 360 tutorial
HTML-код
- Опубликовано: 17 сен 2024
- hey guys, in this video tutorial I will show you how you guys can design a simple drill bit in fusion 360.
Drill bits are cutting tools used to remove material to create holes, almost always of circular cross-section. Drill bits come in many sizes and shapes and can create different kinds of holes in many different materials.
HELIX GENERATOR -- • how to draw Helix curv...
I love that you chose classical for this! it made me want to watch it with ut most concentration :)
I hate to be the one to break the news to you, Sparks, but you just made a left-handed drill bit. ;)
+Jim Barchuk i was just explaining the procedure bro , I think people are smart enough .
I will be carefull next time
Nice vid, helix is a tricky topic. I'm NOT trying to get down on you because it's not a smartness thing at all, it's a spatial orientation thing. But I'm still gonna kid you about it. :)
I NEED helix! (Haven't done it yet but will use your other vid to install it because I've never done an add-in before.) I have a design that needs helix!! It's a -square- profile that needs to follow a 180 degree curved angled path. I spent many hours with all kinds of ideas that never worked. Helix will make it easy and done.
If you're into it here are a couple of ideas/challenges...
Add the chamfer to the flutes to look more realistic.
Add rotation animation.
Different unusual bits, flat/spade, forstner, countersink.
Parameter driven generator that plugs in numbers and creates the drill bit.
wow...
I think that this sharpening will not work. You don't need to make a cone from the tip but made two flat cuts like ones on the image: www.gia.edu/images/144680.jpg
In your case you have a sharp cone. This will not start to cur metal until bit reaches the sharp ages which are couple of millimeters higher. In real life this will never heppen.
would you simulate the drilling
How to make violin neck scroll