Chinarello V Pinarello - Fake or Real, Which is better?

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 493

  • @justsayin3600
    @justsayin3600 4 года назад +230

    The Chinarello office wants to thank you for their 1st QA/QC inspection.
    This was awesome to finally see this!

    • @DilbertMuc
      @DilbertMuc 4 года назад +12

      I guess after the video they will reinforce the headset and put the angle of the front cable insert right. :D))))

    • @arielmelecio7243
      @arielmelecio7243 4 года назад +13

      Ive had top of the line bikes inthe past Colnago BMC Basso Merlin and more, quite a few before 2010, after 30 years of biking i meet the Aliexpress and so far I have owned dogma think2, F8, F10 and im awaiting on an F12 to arrive not one problem with any of them and I tell you BEST BIKEs I HAVE EVER HAD
      Chinarellos as you call them. To me best bike

    • @arielmelecio7243
      @arielmelecio7243 4 года назад +3

      At a fraction of the cost

    • @arielmelecio7243
      @arielmelecio7243 4 года назад +3

      My God take the microphone aeay from this what a terrible narrative worst ever😩

    • @arielmelecio7243
      @arielmelecio7243 4 года назад +6

      Hello, they all made in China or Taiwan 90% of all carbon bikes

  • @draganburza79
    @draganburza79 4 года назад +33

    Thank you. Very educational and to the point. I was thinking that we might never see this comparison as we might realise that fake is not that much different and you might have genuine companies chasing you or forbidding you to show it as it would affect their sales and promote fakes. Good I was corrected and you pointed to us what danger/risks are there. On another note you also showed us the quality of the real one that doesn’t match the price. That being said I bought real pinarello yesterday so I better make sure to register my frame just in case... Once again I appreciate the effort and honesty and I will look forward for more of your technical lessons and comparisons. Hope the genuine companies take notes. Thanks and Regards.

  • @ChinaCycling
    @ChinaCycling 4 года назад +74

    The problem with fakes, as you say, is accountability. They don't care if the frame fails, because it's not their name written on it. Other small Chinese brands or whatever, it's their name on their downtube if it cracks - they have something to lose. So, I agree; I can't recommend buying a fake frame.

    • @glennoc8585
      @glennoc8585 4 года назад +3

      You've had a few though :-)

    • @ChinaCycling
      @ChinaCycling 4 года назад +3

      @@glennoc8585 Yup! Wouldn't recommend it though. You're rolling the dice. I was lucky, mine were all fine. But, I can't recommend it.

    • @glennoc8585
      @glennoc8585 4 года назад

      @@ChinaCycling I ride Chinese carbon but not the fakes. In Saying that unless you buy a frame have it scanned or better cut up to see what's up you never know. Even the smaller Chinese frame brands are bought from.one of the few big factories so if there is a class action.they just fold.up and start as a new name. In Taiwan the law is properly administered and you could go straight to the office HQ with say Giant or Factor. Warranty on small brand Chinese frames forget it there is no return to base outside of China.

    • @David..
      @David.. 4 года назад +14

      I had a super six evo, frame was essentially warped laterally so dropouts were totally uneven and consequently I got brake rub with 23mm as the carbon drop outs wore out over time. I had the original receipt, ppwk, and brought it back to the original dealer and Cannondale just told me to run a smaller tire, warranty and support only as good as the brand backing them. Plenty of scummy big brands.

    • @DavidJones-sc6jc
      @DavidJones-sc6jc 4 года назад +10

      As a 35 year cyclist who had had them all. Stop drinking cool aid. Pinarello makes garbage frames and has done so since the early ‘90s. See how much they care when u contact them for a warranty claim. Time of France is the only real maker of proper frames. Enjoy your over priced POS. LOL.

  • @johnmac9995
    @johnmac9995 4 года назад +142

    You say in your closing thoughts that Chinese unknowns need to looked at on a case by case basis, but between yourself and Hambini it seems this rings true with fully known brands equally. Those faults on the genuine article are unacceptable for the prices Pinarello demand. When the pros get them for free they can be as they are, but when someone is forking out £5K for the frameset alone that's atrocious. Seems like as a consumer it's a case of working out what's worse diarrhoea or constipation, when both leave you with a sore arse.

    • @randallsmith7885
      @randallsmith7885 4 года назад +16

      John Mac so true. Every last Pinarello frame should have been scanned prior to being sold for the prices they charge. Maybe more vids will help convince brands that people don’t want to pay gold for ‘shite’ as Hambini would call them.

    • @ianiscaratti4924
      @ianiscaratti4924 4 года назад +8

      Randall Smith the 5k frame kosts the bikeshop 3k from a distributor
      the 3k frame kosts the distributor 2k from pinarello
      the 2k frame kosts pinarello 1k from asian company
      if you compare a 600$ chinarello to a 1k pinarello than the diference is ok
      if you wan't craftmanship buy a feska or allied! pinarello is for bling and italian passion

    • @johnmac9995
      @johnmac9995 4 года назад +16

      @@ianiscaratti4924 from my experience in the retail sector selling outdoor goods, every person in the chain doubles their money. From manufacturer - distributor - point of sale. This isn't always the case but it often is. When I did a lot of climbing my ropes were typically £2.50 a metre retail. When you saw what we paid at trade to get them in, then worked back to how much it would cost a manufacturer making it in kilometres at a time they were pennies. So this super critical piece of kit which was expensive to the consumer wasn't really expensive.
      On this Pinarello side of things like the chap above says for top end frames you should almost be given a full ultrasound of the frame as part of the QC. Almost like a human x-ray showing it's perfect because for a 5k frame nothing else is acceptable. I highly doubt the person the have layering up the frames for the top end frames is on 5x the wage of someone layering up a basic frame so the cost isn't obscenely more expensive. If anything the cheaper frames are just likely the older model. I'm probably well off the mark but I don't buy into all the marketing I buy the best I can justify and even then hunt like a demon for a better price.

    • @aitorbleda8267
      @aitorbleda8267 4 года назад +5

      @@ianiscaratti4924 I assume the pinarello cost them what, $100? Probably around that.

    • @RB-xv4si
      @RB-xv4si 4 года назад +3

      Ianis Caratti well if you’re talking about Pinarello’s top framesets, they may be getting the raw material from an Asian company (just like every other carbon frame maker does), but they are crafted in Italy and SHOULD be held to much higher quality standards. In reality, maybe they are not. I’m not sure.

  • @gplama
    @gplama 4 года назад +38

    Great video Raoul. 👍🏼

    • @khandolak123
      @khandolak123 4 года назад

      I thinks its more like 10% of the price, 90%-95% of the quality - in this case.

  • @valiantabello
    @valiantabello 4 года назад +26

    The Pinarello does not come off too well here. Great video. Thank you!

    • @PoltergeistWorks
      @PoltergeistWorks 4 года назад +2

      You have to take into account that the bike is 8 YEARS OLD. As Raoul mentioned in one of his videos, the quality of carbon frames has been significantly increasing over the last few years. Yes it's not great, but even 8 years ago they did the important bits right. Headtube is one of the most important parts of the bike.

    • @triode1212
      @triode1212 4 года назад +5

      @@PoltergeistWorks Please, CFRP bike zealots keep repeating this old and tired argument for more than 10 years (since I have argued the point that CFRP is dangerous material to make bikes out of) when the quality of CFRP bikes are shown to be wanting. The problem is that Monocoque CFRP bike mass production manufacturing- no matter how good it is, there are always multiple points for failure to occur. As long as the bike manufacturers do no use the same standards (because it would raise the cost of manufacturing) as the Aviation Industry does with composites, the material is not going a safe material to make bike frames out of. And Even if the bicycle industry did adhere to the same standards as the aviation companies do, the mode of failure of CFRP (catastrophic) still makes it unsafe material to use for bike frames! It is stubborn idiots that keep their heads in the sand wishing that this fact goes away to justify their expensive CFRP bikes or these people are connected to the bike industry in some way.

    • @glennoc8585
      @glennoc8585 4 года назад +1

      @@triode1212 Do you ride a carbon fork?

    • @_systemd
      @_systemd 4 года назад +1

      @@glennoc8585 i ride fox 36 xd but come on he has a point.

    • @glennoc8585
      @glennoc8585 4 года назад

      @@_systemd is your frame CF?.guys punish c.f. enduro.bikes everyday.and I gear of very little.in.the way of failures. Alloy a heavier option and titanium or cromo full say frames are crazy heavy for xc or endure.

  • @cup_and_cone
    @cup_and_cone 4 года назад +61

    The most anticipated bike release video of 2020 wasn't some puff piece about X big brand's new X model being X percent more stiff/lighter/compliant, it was a rotary tool Chinarello showdown...

  • @christianotoole763
    @christianotoole763 4 года назад +2

    Thanks for posting this. It's terrific that knowledgeable and skilled individuals like yourself help us to understand the hands in which we place our lives.

  • @brucewayne3141
    @brucewayne3141 4 года назад +4

    Thank you as always for uploading these educational videos in your free time. Like you said, these copies lack support in critical areas and I suspected exactly that. I had a fake Wilier before and the rear triangle was noticeably softer. The rear tire rubbed the chainstays when I was pedaling out of the saddle.

  • @sprayaho1ic
    @sprayaho1ic 4 года назад +6

    been waiting for this one! cheers

  • @ukdirector85
    @ukdirector85 4 года назад +7

    Fascinating content as always. I was surprised how the Pinarello manufacture couldn't put enough adhesive on the seat juntion as you showed, it's crazy.

  • @keming222
    @keming222 4 года назад +66

    Chinarello: Thanks! We will improve headtube structure and amend cable hole position XD

    • @DilbertMuc
      @DilbertMuc 4 года назад +12

      I assume that Chinarello Inc. will send the new upgraded frame for a follow-up inspection video for free! :D))))

    • @walvin7623
      @walvin7623 4 года назад +5

      And ready to take my money!!!!

  • @exploidur
    @exploidur 4 года назад +17

    Phrase of the century: "Personally, I don't ride a bike I have not scanned" 🥶🥶🥶🥶🥶🥶
    @ 37:14

  • @usernameunknkown
    @usernameunknkown 4 года назад +5

    Glad I got to see this video before Pinarello has it pulled, lmao. Excellent work!

  • @marcusFZ6
    @marcusFZ6 4 года назад +3

    Magic video and I love the attention to detail with each section. Shows exactly what how well they are made.
    Would interesting to see a 2020 Pinarello cut up to see if things have improved.

  • @gallencool
    @gallencool 4 года назад +19

    can you do it in another china frame like seraph, twitter, vcye, winspace, alves and any other smaller china brand, i hope they are better than the fake one.

  • @danieldefeudis8209
    @danieldefeudis8209 4 года назад +3

    Thanks form sharing this amazing work. Many Argentine championships have been won in chinarellos!!!

  • @elevationwestdesigns9095
    @elevationwestdesigns9095 4 года назад +3

    Before he said which one was real , I actually thought the real one was the fake. Wow, what an eye opener. For the price that you pay for the real one, you would think it would be flawless.

  • @BioStuff415
    @BioStuff415 3 года назад +5

    I had one of these Chinarellos...loved the frame.... and had 5 other friends race a whole season - all went well. My SL2 was horrible. I have had 4 Chinarellos - my F8 was the favorite... F12 on the way.... I hope the owner sends this video to the seller...

    • @liveevreyday
      @liveevreyday 2 года назад +1

      Hello, i m looking to buy a f12 from aliexpress. Are you happy with yours? Do you have any recommendations? Greets Aron.

  • @lesflynn4455
    @lesflynn4455 4 года назад +1

    Great video. Thanks very much for posting. I've learned quite a bit from you, and this is only the second video of yours I've watched.

  • @Ligma-Bass
    @Ligma-Bass 4 года назад +5

    The person that had the fake was very lucky to get a little bit of warning of the failure. That bike could have easily just exploded at 80kph on the descent. As you said you really are risking your life, whether the bike is real or fake you’re entrusting your well-being to it. This video makes me even more excited to get my classic Raleigh made from Reynolds 531c built up!

    • @82vitt
      @82vitt 4 года назад +9

      Anybody who takes the risk of descending at 80kph on a 7kg something bicycle with skinny little tires and wearing just lycra is an utter idiot looking for death or serious injuries. For themselves and quite possibly injuring others on the road. Those who get paid a lot of money for doing it have their bikes thoroughly checked for manufacturing defects. Everyone else is on a suicidal mission.

    •  4 года назад +2

      @@82vitt Finally, there is one sensible mind in the universe that has addressed this point appropriately. :)

  • @christianholmstedt8770
    @christianholmstedt8770 4 года назад +5

    Looking forward to checking this out. Thx.

  • @WowRixter
    @WowRixter 4 года назад +9

    At last! 👍 Thanks! BTW, I'm sure the Chinarello manufactures will be honing their craft to be even more deceptive

    • @glennoc8585
      @glennoc8585 4 года назад +1

      The newer Chinarellos would be of higher standard now but the point of knock offs doesn't give them a pass.

  • @MichaelRachal
    @MichaelRachal 4 года назад +5

    Super interesting. Was pulling for the Chinarello but then saw the headset cup in the head tube and said "nah. . .that's not gonna work."

  • @glennoc8585
    @glennoc8585 4 года назад +17

    Raoul can.you do a fork comparison as that's very much as important and for me personally more so. Good vid review.

    • @LuescherTeknik
      @LuescherTeknik  4 года назад +24

      I have the forks for both so can do, when I can fit it in.

  • @roveism
    @roveism 3 года назад

    This is like my 3rd time watching this, wish you did more of these comparisons, I love learning about carbon, thanks Raoul!

  • @trroland1248
    @trroland1248 4 года назад +1

    Shocking. Thank you Mr. Luescher.

  • @1234markrhino
    @1234markrhino 4 года назад +1

    Best video yet Raoul. Great work.

  • @17cream
    @17cream 4 года назад +78

    Daylight robbery considering the cost of the genuine article. So basically it’s a lottery based on quality

    • @carlosgaspar8447
      @carlosgaspar8447 4 года назад +7

      a seat post on the pinarello is bound to be creaky.

    • @smithleon
      @smithleon 4 года назад +8

      I'm staggered by how poor that seat tube on the real one looked, not to mention other areas. The fake actually WON a few points over the real one. Completely unacceptable. It really is just a lottery with carbon frames it seems.

  • @kevinfrost1579
    @kevinfrost1579 4 года назад +1

    Raoul just seen all your vids. Compelling, informative, balanced - Thank you. Parking the brand topic, my view issues are good / bad design, manufacturing process and QC existence (?) / efficacy. Recognising riders may want different things and it's buyer's choice (aka peril). For me it's simpler the process, less things to go wrong. Colnago pre-made lugs and tubes... all internals visible before assembly. Provided experienced operatives can align and glue A to B in a practised handbuilt process with pride and glue remains sound, ...happy days ! ( I do check lug / tube unions regular as part of bike cleaning)

  • @maddoc68
    @maddoc68 4 года назад +8

    BEST VIDEO OF 2020 so far. Laughed a lot. Chinarello=Pinarello, flaws everywhere. Sorry for the fanboys/- girls ... Keep on spending your money for crap!! The brand means nothing regarding quality... LOL and thank u Raoul, we need your cut-ups so much!!!!!

  • @paulgallagher2937
    @paulgallagher2937 4 года назад +6

    It’s a sample size of 1. If you cut open 10 of each, you might find the fake to have less critical flaws. Both are made by hand with high potential for mistakes.

    • @AC-wq7fo
      @AC-wq7fo 4 года назад +3

      Usually, the sample size of 1 is what people buy. I have full reduncancy on several items I own, but I can't do that with a bike frame due to cost. At sample = 1 = $value, seems that it's just such a lottery. A lottery in which especially Raoul and Hambini etc are bringing the odds down in *our* favours.

    • @treymorant905
      @treymorant905 3 года назад

      yup not all genuine pinarello has the same x\exact look at the inside

  • @brushy1953
    @brushy1953 2 года назад +1

    Thanks for your video, it was very informative, I purchased a 651 Think 2 Chinarello through Cycling Yong back in 2014 and have never had an issue with it, mind you I weigh 66 kgs, so not likely to have stressed the frame too much, I run DI2 Ultegra with C24 wheels, so from a cost point of view versus safety and reliability, I'm quite happy with the bike, but I would preface this by saying I'm only a 5000km a year rider, so the bike hasn't been put through a searching test, but I appreciate your observations and potential structural failures.

  • @chrishophoto
    @chrishophoto 4 года назад +8

    Great video! I wouldn't want to be on either of these bikes! For what Pinarello charges for their framesets, I would expect better from them. The quality of both of these is rubbish! I have always thought that this particular generation of the Dogma, with the wavy stays and forks looked ugly. Its overly complicated shape really served little purpose, and you have made the point that simpler is better when trying to obtain optimum quality. So far, I have seen very few bladder molded bikes that I have ever wanted to own, though I must admit that I do lust after the new S-Works SL7. Thanks again for this great video! Please cut up a few Colnagos for us!

  • @DavidJones-sc6jc
    @DavidJones-sc6jc 4 года назад +2

    His videos are absolutely brilliant. You can learn so much. I’d love to see his take on Time frames which IMO are the high water mark of carbon fiber construction.

    • @LuescherTeknik
      @LuescherTeknik  4 года назад +3

      Thanks for the kind words. FYI I have a Time Skylon frame already cut up for an upcoming review.

  • @Dumdadum76
    @Dumdadum76 4 года назад +12

    35:30 I’d share your bias against counterfeits. But, time and again, these video’s point out that *at best* there is no discernable difference between the big brands and the Chinarello’s of this world. Imo, that should be the point of this video; why pay 5k when all the QC budget ends up being spent on marketing.
    When choosing between two evils, i would like to be in it for the least amount of money. My takeaway is, i’ll buy Chinese, just not a blatant copy.

    • @theadventurebiker
      @theadventurebiker 4 года назад +3

      ...I'll buy steel or aluminum. F that carbon crap.

    • @cjohnson3836
      @cjohnson3836 4 года назад +1

      @@theadventurebiker Steel frame/fork with carbon seatpost/handlebar (or just get titanium for the same cost) will have all the compliance of a carbon bike and none of the weaknesses.

    • @theadventurebiker
      @theadventurebiker 4 года назад

      @@cjohnson3836 Exactly. 👍

    • @theadventurebiker
      @theadventurebiker 4 года назад +2

      @@cjohnson3836 Actually I'm staying away from carbon posts and bars as well. That shit's too unreliable and unpredictable. And F'n dangerous. This video shows what happened to a carbon bar on our tandem:
      ruclips.net/video/-V5D9zHNx_A/видео.html
      Granted it was a cheap Chinacarbon bar but as Raoul points out in his video with carbon you really don't know what you're getting and we can't really know if a bar from a name brand would be a whole lot different or better. I only buy aluminum posts and bars from now on. In all my years of riding I never once had an issue with an aluminium post or bar.

  • @Michael-kv9pp
    @Michael-kv9pp 4 года назад +15

    If you are willing to pay a little more I guess the Chinese bike manufacturers can make it even better than the original. With the Chinese frame, you get what you paid for but with the original you still get crap even if you paid premium.

  • @steveflor9942
    @steveflor9942 4 года назад +2

    Raoul, thanks for this great video.
    Fascinating story you tell.
    Aluminum frames almost always have a gusset welded at the bottom of head tube/down tube junction.
    The genuine Pinarello was a carbon fiber counterpart of that gusset. The fake Pinarello does not! A failure waiting to happen, as you so correctly state.
    Best regards, stevesocal40

  • @Leatt25
    @Leatt25 4 года назад +3

    Thank you so much for your content. Your video on the S Works SL5 Tarmac helped me to make a decision on purchasing a carbon bike frame set up. Some of this stuff is so over priced and poorly made it's silly.

  • @thedownunderverse
    @thedownunderverse 4 года назад +42

    OMFG they both look HORRIBLE around the BB. Unbelieveable!!

    • @mudathirg
      @mudathirg 4 года назад

      Time vxrs 2005 hand made look soo clean

  • @jasonosunkoya
    @jasonosunkoya 4 года назад +15

    Interesting, as an owner of a Chinarello dogma f12! I feel more validated for not buying it now

    • @Ghostina1
      @Ghostina1 4 года назад +2

      Me too. Mine rolls great we no issues since 15tkm

    • @davidg2731
      @davidg2731 3 года назад

      You mean the real one?

  • @DolleHengst
    @DolleHengst 4 года назад +4

    Chinarello Dogmane F21, my dream bike

  • @danielmoorhouse6506
    @danielmoorhouse6506 4 года назад +2

    Hi. Have you done a recent canyon bike? If not is it on a list to do? Thanks.

  • @B00024406
    @B00024406 3 года назад +1

    It is for both a sample of 1. I would love seeing a few of each side to side to see the consistency of the build... seeing the seat tube of the genuine one, I would not be surprised that the wall thickness in the headset is a manufacturing glitch.

    • @LuescherTeknik
      @LuescherTeknik  3 года назад +2

      Agree, it just takes more resources that I don't have to do this, it would be great to test 50 but I would need serious support to do this.

  • @luukrutten1295
    @luukrutten1295 4 года назад +17

    I think even the real one looks quite unimpressive. So much junk left in there. And in some areas indeed the fake looks moulded cleaner. The copy is of course dangerous and i wouldnt recommend one.

  • @glennoc8585
    @glennoc8585 4 года назад +6

    I give 5/10.to chinarello and 5/10.to Pinarello here. My 3 yr old well.used non branded Chinese frame is going strong. I'm.yet to see aa good tolerance on the headset bearing seats. I've had to epoxy bearing in with a release to remove play. Giant,, look,or Time then colnago are still.the go-to for.QC. if you're cashed up.an artisan but frame like a bauhm or Bastion etc.

    • @MrBubba3494
      @MrBubba3494 2 года назад

      Can I ask you How did u solve the headset bearing seats? Im having the same problem right now, The upper seat is Slightly oversized and the bearing drops loose in the headset

  • @mechpatt
    @mechpatt 3 года назад +5

    The scary part is - they didn't understand the thickness of that section was for strength on the original, and just filled it with foam to save a few cents ...

  • @TheraPi
    @TheraPi 4 года назад +10

    It's all our (byers) fault. As long as we pay gold for shite, the quality control will be a joke

  • @perwiratempur
    @perwiratempur 4 года назад +1

    Thanks for the in-depth review!

  • @2wheelsrbest327
    @2wheelsrbest327 3 года назад +2

    Thanks Raoul very interesting video. I have always wanted either a Pinarello or Colnago but the pension wouldnt stretch that far so I was hoping this was going to persuade to buy a copy. Well that's that idea out of the way then. Probably going to buy a Yoeleo frame set if they still do one with rim brakes as Oz Cycle seems to recommend them. Why the big brands cant see that if they lowered their prices the volumes the sold would treble over night I don't know. Alongside Oz Cycle , Hambini and a few others your now why of my go to channels. Stay safe out there.

  • @paulz3002
    @paulz3002 4 года назад +2

    Which company manufactured the Chinarello? How old was it and how many km’s was it ridden before it was retired?
    We are dealing with small sample sizes for analysis. Are the same problems re-occurring in frames made by certain manufacturers?
    Raoul - your videos are highlighting important issues. Thank you and keep up the good work.

  • @Plasmo20
    @Plasmo20 4 года назад +1

    This is a Think 65.1.... many many years old build and hardly a current comparison. I own a 2015 F8 and 2016 F8 clone. And Ive bought a few Used clones over time and can see the improvement in build quality. In my experience comparing my 2 bikes:
    Chinarello
    frameset weighs a tad more, say 120gms
    Aside from the lack of the Bar code serial number under the BB visually they are indistiguishable and share the same parts. You can use all the genuine plugs, seatpost, bearings in either.
    Internally both have been BAGGED in construction, in fact the Chinarello is a bit tidier inside around BB and HT.
    Forks feels so confidence inspiring on fast downs and through corners.
    F8
    A tad lighter in the frameset
    A bit faster in a sprint and steepest hill climbs at max power. So one can assume a bit stiffer in the BB and HT areas. Real uses 1100 vs 800 Toray.
    I sold the CHINARELLO to my road racing family neighbour (full disclosure so he knew) He needed a $1K bike for his son and was happy to take it (SRAM Red 10sp, DA C35 wheelset). The son, experienced racer in his youth, commented this is the first bike in years he has felt confident riding in fast descents, better than the TREKS, Scotts, Cerveolos etc they had been using.
    The biggest concern with Chinarellos will be getting a good one. There must be a few making them and I have seen some that are rough on the inside and in my opinion an inferior build. So I check who the supplier is for this reason. There is one I know makes a good product.
    ALSO if you watch a story on Geraint Thomas / Team SKY that covers this period when SKY were riding the 65.1 the comment was the bike was SLOW so they didnt expect much from it. Then the F8 was launched and SKY took off. IMO this video, while interesting, is very out of date given we are in 2020. If we dissected say a 2018 version of each then I would pay more attention. cheers

    • @LuescherTeknik
      @LuescherTeknik  4 года назад +1

      Thanks for the comments, yes things have improved over time however the 65.1 was touted as being state of the art at the time and superior to others. Because the Chinarello I was given was a copy of that model it was chosen as the comparison. If someone sends me a current F12 and Chinarello copy I will gladly do a review.

  • @randallsmith7885
    @randallsmith7885 4 года назад +2

    Hoping you will do a full cut up on a Dogma F8, F10 or F12.

    • @rickyhuff
      @rickyhuff 4 года назад +1

      I wish I could find where I read this but, it was observed that the F series had addressed these issues, progressively getting better, F8 through F12.

    • @LuescherTeknik
      @LuescherTeknik  4 года назад +1

      Maybe you read that in the marketing brochure. I have a few F8's ;)

  • @katomiler843
    @katomiler843 4 года назад

    Your posts are really good. Cheers.

  • @navarrouk3487
    @navarrouk3487 4 года назад +2

    Could you analize pragma bike frame?

    • @rato_gordo
      @rato_gordo 4 года назад

      That would be really interesting.

    • @Sir_Godz
      @Sir_Godz 4 года назад

      have you been able to figure out which aliexpress frames he uses?

    • @DilbertMuc
      @DilbertMuc 4 года назад

      @@Sir_Godz The orange-yellow ones.

    • @calebd4669
      @calebd4669 4 года назад

      @@Sir_Godz some of them were from lightcarbon

  • @qinli3280
    @qinli3280 4 года назад +25

    Funny thing is, assuming both pinarello and chinarello manufacturers have seen this video, who do you think will be more likely to fix their product's weakness?

    • @marty197666
      @marty197666 4 года назад +15

      The fakers sadly

    • @darrellwhitford7084
      @darrellwhitford7084 4 года назад +3

      Unfortunately Martin Wright you’re probably correct

    • @KellogsFerns
      @KellogsFerns 3 года назад +1

      101% the Chinese, because they care for your opinion and needs, where the ROYAL class (orig. Pina) doesn't give a shit about you!
      Me personally after watching this video, not paying for genuine carbon frame!

  • @KellogsFerns
    @KellogsFerns 3 года назад +6

    Is it just me or the China looks like a better mold??? Especially the seat post!! Definitely not paying $6500 for poor Pina craftsmanship!
    Also look how much straight and perfectly, constant structutal thickness there is on the china!

  • @suhdud4646
    @suhdud4646 4 года назад +1

    I bought a non-branded Pinarello inspired frame with the snake fork back in 2010 with a set of 80mm carbon wheels.
    That frame and wheels set is still going strong to this day. I would rather buy non branded, molded frame design over a branded replica. I would rather have a frame where you know they hopefully havent cut costs on the frame to fit in the paint job. With that being said, I doubt that any company selling sub-par products would still be around. Most Chinese Carbon factories have 10+ years and I prefer supporting the Chinese factories by buying their carbon products over a western brand.
    I have recently bought a Chromoly frame and using a brand called ToSeek for all the carbon parts (Seat-post, stem, handlebars, spacers) and built up a commuter and have over 3500Km on that build and not one issue with the carbon.

  • @JM-sn2xl
    @JM-sn2xl 2 года назад +1

    Just got this exact Chinarello frame coupled with Dura Ace and I love descending. Wish me luck. 😹😹

  • @Sills71
    @Sills71 4 года назад +1

    Are the problems (at the headtube, bearing race not seated and too little carbon near the junction) that were found in the Chinarello likely to be repeated in the manufacturing process? Would you wager that another frame from the same maker would have the same flaws? Why?

  • @ChristianCastleman
    @ChristianCastleman 3 года назад

    Yesterday Oz talked me out of ever buying Ultegra or Durace cranksets (bonded arm garbage) today you convinced me to steer clear of Carbon frames. Looks like I stay with my vintage Casati Columbus steel bike and Campagnolo cranks.

  • @HarryFunmaker
    @HarryFunmaker 4 года назад +2

    Great video. All cyclists should see this. It’s disappointing all around, really. A low-quality fake is expected, but I would hope a real Pinarello would be manufactured better than that. I’d love to see more videos like this, but I’m sure it’s not easy and certainly isn’t cheap.

  • @dantedorado2609
    @dantedorado2609 4 года назад

    Very educational, cheers Raoul.

  • @davidbidwell250
    @davidbidwell250 4 года назад +4

    Very informative. I would have expected much better quality out of the Pinarello given its 10x the price. Some comments claim Pinarello should be given some slack given the age of the bike. But hasn't the industry been making carbon fiber bikes for almost 40 years? I'll stick with my aluminum frame and inspect for fatigue periodically.

  • @larisonjohnson
    @larisonjohnson 4 года назад +3

    Appreciate the education. Thanks for the content. This type of eye opening subject matter is always better when delivered by a true Subject Matter Expert like yourself. I guess the proof of the pudding is still, in the tasting, and hopefully it’s not asphalt you end up tasting.

  • @builtbypi2276
    @builtbypi2276 2 года назад +10

    Playback 1.5x thank me later. Who else is watching this about to buy a Chinarello frame

    • @tobznoobs
      @tobznoobs Год назад +1

      me because a saw a pinarello with di2 ultegra for like 1200$. tempted

  • @Bikes-guitars
    @Bikes-guitars 4 года назад +2

    Thank you for producing these videos, it’s great to see the difference here, it’s also shocking how poorly made the genuine frames are! I have 2 Bianchi’s and 2 Trek bikes, from now on I think I will be sticking with Trek as I feel their frames are better manufactured, i both would and wouldn’t like to see my Bianchi Specialissima cut in half! It would be interesting to see how good or badly made it is!

    • @maddoc68
      @maddoc68 4 года назад +3

      trek is the same crap. the brands stand for nothing...

    • @marty197666
      @marty197666 4 года назад +2

      Trek is made by quest, who make canyon. Both shocking quality control. Shame as I love my canyon :(

    •  4 года назад +1

      I've had two US-made Madones and one coming from Taiwan, where they are all being manufactured nowadays. Never again. Borderline criminal QA/QC.
      Now I own an Allez Sprint with NDT-inspected fork, 28mm tyres paired to 30mm outside/23mm inside diametre wheels and couldn't be more happy.

  • @t.b.r.2844
    @t.b.r.2844 4 года назад

    Hi - which carbon frames do you recommend? Best quality... ?

  • @aldrinclementina4297
    @aldrinclementina4297 3 года назад

    What do you thing about the Velobuild bikes that buyable on line?

  • @trantam9842
    @trantam9842 4 года назад

    I have a Chinarello for my trainer, the details is bad but from distance it’s shining beauty. Sometimes I take it out to go around, yes it’s light and no problems so far but for speed/ KOM I feel more safe on legit one. If you want to enjoy the ride say no to fake.

  • @RB-xv4si
    @RB-xv4si 4 года назад +1

    Valid points here. I do wonder how their current F12 frameset holds up in this test. This cut frameset is 3 or 4 generations old. Would be interesting to see how things have improved if at all. I’m led to believe they have improved. If you keep making a frameset lighter and lighter, there is less margin for error in the layup process. One might say if any of these blemishes existed in something like the F12 Xlight, the results would be catastrophic on frame walls as thin as those. So much so, that in that instance, quality control really becomes safety control.

  • @christosandreev6392
    @christosandreev6392 Год назад +1

    I bought accidentally a chinarello 65.1 think2. One guy was selling it second hand in the FB marketplace and it looked very real. After watching this video I realized it was a fake. I bought it for 1200 euro which I thought is a good deal for a 11 year old bike of that caliper. I was dead wrong :( What should I do? I ordered lots of parts, including the 65.1 proprietary seatpost as the "original" one was not zero offset. What a stupid way to waste 2000 euro... I'm so pissed now.

    • @Journeyofourlife436
      @Journeyofourlife436 Год назад

      If you have no choice and managed to make it work you can keep it. I have 2 friends that owned Chinarello and another friend of mine owning Pinarello, ohh boy they felt almost identically the same when riding it downhill, it is scary to think that these Chinese copies are getting better and better.

  • @chaririderjapan7179
    @chaririderjapan7179 4 года назад +3

    Chinarelo has less voids, great job!

  • @davidgarza2267
    @davidgarza2267 4 года назад +4

    Chinarellos and other knockoffs (especially the early versions) were made with the main selling point of “looking like” an expensive bike. Aside from being tacky, I wouldn’t ever trust or ride one.
    That said...I rode an open mould frame for years and had thousands of trouble free miles on it. I sold it locally and that rider also rode it for a long time. It’s now on its third owner and still going strong.

    • @chinarello2928
      @chinarello2928 4 года назад +6

      David Garza Good point. The wavy Pinarello designs are so tacky. I’m fairly sure no meaningful structural modeling went into designing those. It was just some guys in marketing deciding We need to stand out somehow so Let’s make the frames curvy.

    • @nuttynut722
      @nuttynut722 4 года назад +2

      @@chinarello2928 very very good point indeed

    • @DilbertMuc
      @DilbertMuc 4 года назад

      I guess "the Pinarello Onda", the wavy parts of the frame where by design, so that copy clones were much more difficult to make and most cloners would chose other brands to copy from. Inherent copy protection. ;)

  • @aldrinclementina4297
    @aldrinclementina4297 3 года назад

    Great Video. I don't know if you already did the same comparison of the Real XR4 and the fake one?

  • @jaggedsphere
    @jaggedsphere 3 года назад +1

    copying or designing based off of another's design is one thing(I don't completely disagree with it). Misleading someone with a counterfeit is not at all cool and demonstrates a deep disrespect for the activity it is counterfeiting. Take the stratocaster guitar for example. There are successful companies who make(superb) almost 1:1 strat copies. And it's cool to do so. They sometimes add some minor innovations or more options than what you may be able to get from Fender. But all in all I'm not terrible against copying as long as it is done as good or better than the original. Actually you can literally buy a hand made strat copy that is arguably better than an og strat!

  • @chaririderjapan7179
    @chaririderjapan7179 4 года назад +1

    Every time I ride here in Japan, I see many pinarellos, seem to be very popular among japanese riders. Also saw them in bicycle stores, they are quite expensive as well. Didn’t know that quality on these sucks!

  • @MegaXtc11
    @MegaXtc11 4 года назад +11

    Steel/Titanium for life

  • @rickmancini772
    @rickmancini772 4 года назад +1

    Great video - would have been helpful to initially point out that Pinarello does not manufacture their frame in a company owned facility in Italy, but sources it from a sub contractor in Asia (I think Giant).

    • @KellogsFerns
      @KellogsFerns 3 года назад +1

      The real Pinarello frames are made by Carbotec Industrial of Taiwan and China.

    • @rickmancini772
      @rickmancini772 3 года назад +1

      @@KellogsFerns thanks,

  • @Hambini
    @Hambini 4 года назад +8

    is anyone actually surprised?!

    • @dafj5618
      @dafj5618 4 года назад

      Surprised you’re still pretending your name is Sachin Hambini and not Sanjeev Varah? Yes

    • @Sir_Godz
      @Sir_Godz 4 года назад

      at what? the questionable pinarello or the decent chinarello? both seem to be a coin flip and in reality where the flaws are located are a coin flip to.
      love ur channel btw

  • @jaro6985
    @jaro6985 4 года назад +1

    Bit of a crack at 20:04 on the left? or is that just from disassembly. Good comparison.

  • @scottjohnston150
    @scottjohnston150 4 года назад +2

    Very interesting and informative and I have one of those Pinarello Prince frames from about 2010 and its my turbo bike now.

    • @LuescherTeknik
      @LuescherTeknik  4 года назад

      Has it cracked at the non drive side chain stay yet? Many did.

    • @scottjohnston150
      @scottjohnston150 4 года назад +1

      Luescher Teknik I actually had a pretty bad crash which resulted in a three inch hole in the top tube that you could put your finger through. Sent it to a carbon repair specialist here in the UK and he repaired it so well You had to look very closely to find the original hole. Raced for a few seasons more on it with no issues but retired it to the turbo. I will have a look at the stays now just to see if there is any sign of cracking etc.

    • @LuescherTeknik
      @LuescherTeknik  4 года назад

      I found one that didn't have any adhesive in the chain stay joint, just held together with the 1 ply cosmetic over wrap!

    • @scottjohnston150
      @scottjohnston150 4 года назад

      Luescher Teknik Funny, when I ordered my Pinarello I was going to Treviso in Italy for a holiday where the factory is and I asked if I could get a factory tour as I had just ordered an expensive frame but they declined. I thought they were manufactured in Italy but they were only assembled there, not really “Made in Italy” I have a Cipollini now but I don’t really want to know what you think of their manufacturing,

    • @LuescherTeknik
      @LuescherTeknik  4 года назад

      @@scottjohnston150 It should be called a warehouse tour not factory tour! I've had quite a few Cipollini frames come through.

  • @Jason-ty6ds
    @Jason-ty6ds 4 года назад +1

    Not saying the costs shouldn't be lower on the genuine one but people are not accounting for development cost, etc for the genuine one.

  • @Ghostina1
    @Ghostina1 4 года назад

    would be interesting to see your oppinion on the never fakes... F10 & F12

  • @MrJaycobsen
    @MrJaycobsen 4 года назад +1

    Very informative. Thank you very much

  • @freds-shed
    @freds-shed 4 года назад +1

    I guess you never heard of tapping it with a coin and listening to check if its sounds cracked, works a treat and 100% safe

    • @LuescherTeknik
      @LuescherTeknik  4 года назад

      I have done a video on the pros and cons of the tap test.

  • @fernandocycling9662
    @fernandocycling9662 4 года назад

    Where the Pinarello Frameset are made? Thanks

  • @johnsmith1474
    @johnsmith1474 4 года назад +12

    The seatpost area on the Pinny is just as likely to fail as the headtube on the fake.

    • @LuescherTeknik
      @LuescherTeknik  4 года назад +8

      But you won't land on your face if it does, only get carbon splinters in your butt. Painful sure, but it's unlikely to kill you.

    • @robinseibel7540
      @robinseibel7540 4 года назад +2

      That misses the point completely.

    • @glennoc8585
      @glennoc8585 4 года назад +2

      @@robinseibel7540 I see your point. if It came down to it I'd take a seat tube failure than.a fork or head tube any day.

    • @robinseibel7540
      @robinseibel7540 4 года назад +2

      @@glennoc8585 That's exactly it. A head tube failure can net you nasty face injuries, a head injury, a wheelchair for life, or things much worse. A seatpost failure might hurt, but it's much less likely to cause serious injury or death.

    • @mura0
      @mura0 4 года назад +1

      @@robinseibel7540 non sense. You can get seriously hurt or not on both failures.

  • @nickw6175
    @nickw6175 4 года назад

    would like to know how many kilometers the chinarello had done before this issue arose ?

  • @workshopninjathe1st
    @workshopninjathe1st 4 года назад

    Why did the real one end up in your workshop?
    You never talk about why the real one failed - was it a “failure”, or post crash?
    Great video - very thorough.

    • @DilbertMuc
      @DilbertMuc 4 года назад

      The seat tube was loose. We saw it in the video. :D)))

  • @meibing4912
    @meibing4912 3 года назад

    Great video. What I learned: buy whatever - and prey - hard...

  • @watermydriedupsoul
    @watermydriedupsoul Год назад

    Initially, I was like "wow this is great stuff, they're not too far away from each other". Until the end, where he said "the copy can potentially kill you". That escalated quickly.

  • @earthstick
    @earthstick 4 года назад +1

    The creases on the outside of the frame look a bit sharper and more pronounced on the Pinarello, they are a bit softer on the fake.

    • @LuescherTeknik
      @LuescherTeknik  4 года назад +1

      That is probably an advantage actually.

  • @bisikleta1015
    @bisikleta1015 2 года назад

    Although the chinarello cracked, we were never really there to see what the rider actually did, you even mentioned downhill on a rough road. But, I think to escalate things quickly as saying "would you buy something that could kill you" is very 9gag.
    As much as we don't want to buy fake stuff, truth is, China is all we poor people have because everything is made in China.
    As an engineer, if it is a blind test, I might pick the fake one because it has more cleaner layout and thicker resin.
    The video is really nice and the comparison is spot on. If any takeaway is due, I'd say is that pinarello with 10x the price, is NOT doing their job perfectly in laying out those fibers. I initially though, fake is a far 50% in quality, I never thought it'll be a neck and neck close.

  • @roverron7509
    @roverron7509 4 года назад

    I’ll stick with my Litespeed. Great video.

  • @RichL123
    @RichL123 4 года назад

    Is it possible you caused some voids from cutting or no?

    • @LuescherTeknik
      @LuescherTeknik  4 года назад

      Thanks for the question. No, it is not possible to put air bubbles in the resin after it has cured. I did a video on how I cut the bikes up some time ago when another person also asked this.

  • @bearmare9710
    @bearmare9710 4 года назад +10

    I'd say based on this video there isn't really that much of an improvement over a real Pinarello compared to a Chinarello. Kind of makes one wonder what one is paying for when they get a real Pinarello.

  • @skipad5052
    @skipad5052 3 года назад

    Where you can buy chinarello?

  • @joneswebs
    @joneswebs 4 года назад +1

    Great video. It's a shame that the chinarello people wouldn't just invest is some marketing and pr and develop their own brand. The technogy and process is obviously comparible to the pino with some issues with quality which I'm sure could be easily addressed.

  • @dantepasqua2905
    @dantepasqua2905 3 года назад +2

    Chinarello is very good