How To Clean A Rusty Gas Tank W/ Acid and Baking Soda From Home Depot - Sealing After is Recommended
HTML-код
- Опубликовано: 26 июл 2022
- This method Is harsh on the galvanized surface of the tank you MUST re-seal the tank with a POR15 type product or similar!!!
Follow along as we clean the inside of a rusty metal gas tank in our 1995 Supercharged Ford Bronco Eddie Bauer for about $25. This method can be used for ANY metal gas tank. It’s fast, simple and economical. Cars, Trucks or Motorcycles. #bronco #gastank #cleaning
Please do your due diligence and make sure this method is for you. Wear protective gear, goggles and gloves. Have a bottle of baking soda mixed and water nearby in case of an accident. Muriatic acid is no joke. Please be safe. Please read the bottles warnings and precautions. It can be purchased at Home Depot for $10.
When finished you must mix Baking soda until all the “fizzing” stops!! Then rinse with clean water for 10 minutes. Quickly dry the tank and coat with product below to prevent flash rusting.
PLEASE HELP SUPPORT THE CHANNEL IF YOU ENJOYED THE CONTENT.
PayPal: n2kpi@yahoo.com
Venmo: @broncosandparts
Cashapp: $broncosandparts
It really help with keeping the videos flowing, the lights on and with shop supplies. Even a few bucks. Thanks!!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FOLLOW FOR COMPLETE BUILD!!!!
^^^^^^^^^^^^^^^^^^^^^^^^^^^
I Bought A Supercharged Ford Bronco - Lets Take A Look - Part 1
• I Bought A Supercharge...
Please scroll below!!!
---------------
If you've enjoyed the content and feel like supporting the channel, it won't cost you a cent, as you can simply just donate some of your time by allowing the ads to play through. Doing this will help out a lot and that’s how I make a tiny bit of revenue. More revenue means more How To Videos!! 👊🏻😄....... Please don’t ever feel as though you need to watch the ads if you don’t want to. Simply skip them and move on to the video- it’s completely up to you and I understand if you don’t have the time to do so👌🏻😁👍🏻 Thanks again for your support!!
--------------
Links For Supplies Below:
************************************
QUANTUM FUEL SYSTEMS PUMP
www.highflowfuel.com/?gclid=C...
SS14 Sea Foam Spray Quick Acting Top Engine Cleaner And Lube 12oz (Pack Of 2)
amzn.to/3Q2nSAA
Arm & Hammer Baking Soda 13lb
amzn.to/3oFYBAg
Ullman No. 14X Super Strength Flex Magnet Retrieving Tool, 21-9/16" Length, 1-1/2 lbs Capacity
amzn.to/3BlnGYY
Supermore Anti-Fog Protective Safety Goggles Lab Goggles
amzn.to/3S3CrWi
10 Pack Face Shield for Protection Clear Mask with Glasses Reusable Anti-fog Transparent Plastic Face Shields
amzn.to/3S0PAiZ
Disposable Black Nitrile Gloves 6 Mil. Extra Strength Latex & Powder Free, Textured Fingertips Gloves
amzn.to/3Q5dNTz
Please Like and Subscribe.
Follow along on:
/ broncosandparts
@broncos.and.parts on Instagram
Email : n2kpi@yahoo.com
We sell used Ford Bronco and Truck Parts
***DISCLAIMER***
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
FTC Disclaimer
---------
This video was not sponsored. All items were purchased with my own money unless otherwise stated and opinions are my own.
This description contains affiliate links which means if you click on one of the qualified product links, I’ll receive a small commission if you decide to make a purchase. This does NOT cost you anything extra and if you don’t want to use the links you can always search Google and purchase the product separately, no worries.
Thanks ! 
Авто/Мото
Personally, I would have stuck with the Marvel Mystery Oil. It's been around 100 years for a reason ☺️
Thanks for posting this, I'm restoring some vintage gas cans that have been sitting. Gave me some good ideas 👍👍
Anything to stop flash rust prior to install and filling with fuel.
Thanks for this. I'm going to do my 67 Dart tank tomorrow. It's been sitting for 16 years.
Glad I could help. Be sure to line the tank too. Keep adding baking soda until it stops fizzing to neutralize the solution. Also- Costco sells huge bags for $7
Great video! Thanks!
Thank you
Great video. Debating on buying a new tank or cleaning the one I have. This video was extremely helpful. Thanks!
Glad it was helpful! If it’s a rare tank, clean yours. If it’s a common reproduction, and shipping is cheap, buy one.
Great info! New sub!
Thank you
right on time. i need to clean both my tanks on my 93 Lightning I'm restoring. Fairly certain the gas is from 2016 as the previous owner stopped using the rear tank after the fuel pump supposedly went out. I'm still fairly certain is was his ECU though, it was corroded to hell and when they gave up on the truck it wouldnt start so i replaced it along with a few other things and got her fired up after years of rotting. Sorry went off topic, thanks for the video, ill be hitting up your amazon links for sure!
Be carful. Use safety gear
Good video
Thx
Thanks Chris.
I'm not a mechanic for 5 cents, but I'm having problems starting up my 1990 EB, so your video is just right. I can't hear the pump anymore when I start it. I'm afraid I have to do the big tank job. First of all I have to check all my relays and kill switch. No gas pressure. Here in Canada, Quebec, it's very difficult to find parts like the unit in the tank (pumps and sendind unit. Nice work and thank you for your videos and your help.
No problem.
Thanks.
No problem
its kind of funny. my original tank was completely fine when i replaced it a couple years ago. it only got swapped out because of the dent that was costing me around 2 gallons of capacity. it was amazing that it was completely clean inside and it was around 30 years old when i swapped it. gotta keep em moving and a good cap on it.
That’s awesome. Keep em full. Less rust!!
Hey Chris, love the videos!!!! I have a stock 92 bronco and I was curious if 33s would fit without much rubbing. Thanks.
They will rub your front spoiler lip and they will rub the edge of your front bumper. Depending on your offset they could rub your radius arm. Lots of people either space there bumper out forward or they trim the actual corner of the bumper
Thanks for the info! I really appreciate it.
Need advice. 90 bronco eddie bauer fully original. suspension for city driving mostly, steering wheel moves a bit up and down, piece between the headliner and the top like molding, new rear bumper system that hold spare...old tire rack bent the quarter panels. Thanks for any advice to solve these last few issues.
Steering wheel sounds like bushings. If your tire carrier has damaged your rear quarter, I’d simple remove it as the metal has been compromised. I sell the topper trim as well
Thanks for the video man. I have a 79 rx7 with a clog in the fuel pick up line thats brazed into the tank (car uses an external fuel pump), so I'm hoping this will work. Do you know if I should use POR15 to seal the tank?
Por15 or other sealing chemicals. I’ve used some off brand years ago
Do you have any tips on cutting an access door to reach the fuel pump from the inside so you don’t need to drop the tank to fix or replace the pump?
I’m not a big fan of that. It’s a great time to drop the tank clean out your skid plate and prevent any type of corrosion. I would post it in the Facebook group broncos and parts Garage if you’re not already a member, and I’m sure someone has the dimensions if you go that route
Great work. I’ve heard dropping the tank is a pita. If I’m dropping the tank without a lift does this make it infinitely harder?
No. Just make sure tank is as empty as possible. Use a floor Jack to lower tank. Get a buddy to help.
Thank you for great info.
I'm looking for body mount hardware for my 95 bronco.
Can you help me.
Thank you again
Try Jeffs bronco graveysrd
Safety shorts.
You should see my safety sandals. lol.
I am looking for the inner part of the quarter panels
I don’t have any
Is the Bronco maf, or SD? I have a 95 5.0 with sd,and am curious about performance upgrades
Being a 351 and a 95, sadly it’s speed density. Your 95 should be an MAF!?
@@BroncosandPartsGarage twin bore throttle body. I'm led to believe that's SD
Why not pour out acid first, then neutralize with baking soda
Please don’t. lMake the acid safe first.
I am working on removing rust from a fuel tank right now using evaporust. I drained the evaporust and rinsed out the tank but noticed flash rust very quickly. How did the seafoam spray work afterall? Any flash rusting happen?
Seafoam, did stop the flash rust. We installed the tank then topped off the tank with gas. The Acid removes some of the galvanized coating. We pulled the tank 8 months later. Still no rust. That said, I would still coat the tank after cleaning or just make sure I didn’t leave it empty for long periods of time. The seafoam obviously is washed away with first tank of of gas.
Bronco tanks are $100 new. So easy to swap. Older classic cars and trucks, this video is a lifeline.
@@BroncosandPartsGaragehow do i fog the tank with seafoam
I have a 94 Bronco. Any idea what size the fuel lines are. They need replaced.
Check with Jeff sprinkle Graveyard in Michigan. I know they sell the rear fuel
Lines.
To clean more of the tank, could you add 3 gallons of water in 3 gallons of that acid?
…. You could. Usually the entire tank won’t rust, just the bottom. I’d slosh it around. Safely. It will chew into the galvanized finish eventually. When your done, pout in the baking soda until ALL the fizzing stops to ensure you neutralize the acid. We did not reseal our tank but we had no issues. I still recommend drying and fogging it asap.
Great video! Can I ask how sealing the tank with the Seafoam has held up? I noticed in the description you said to use a product like Por15. Like you I have a brand new can of the the same aerosol Seafoam I'll use if it worked for you.
Thank you. We used the seafoam spray JUST to prevent the tank from flash rusting. Had we had the por-15, we’d of coated tank right away.
@@BroncosandPartsGarage so what I did was immediately after vinegar washing the tank and blow drying it I used a bottle of Lucas safeguard ethanol fuel conditioner swirl it around the tank and then used a bit of the seafoam. But honestly I don't think I needed to see foam after the Lucas ethanol treatment. After swirling the Lucas ethanol treatment I drained as much of it as I could and put the tank in and then put 12 gallons into the tank. No issues I'll update you if the tank rustest out on me.
@@BPattBany updates?
On?
@@BroncosandPartsGarage it was in reference to the above comment that said it would update to see if it rusted again.
I hear you guys mentioning por15. Are you putting this inside your tank😳? Ive used it on frame and outside of tank but didnt think this was something to coat the inside of a gas tank with. Could you confirm if your using inside or not. Great video too by the way
That is correct. They make a tank sealant too. It’s different than typical chassis paint. I have another tank we did NOT coat. A year later, no rust. But we keep the tank 1/2 full during storage
Oiling inside the tank won't hurt any of the injectors or anything?
The compound we used was actually designed for cleaning internal combustion engines. Including fogging engines. Link in description. Sea Foam makes some good stuff.
Really not any rust in that tank. All the acid did is eat the coating off of the inside of the tank, so now it will definitely rust as you didn't coat the tank. I would have used acetone or alcohol to remove the gelled gas.
What coating are you referring too? We’ve used the technique on much worse tanks- usually in instances where replacements are not available.
Lacks details
Lol
My god forget the back story. Terrible
Lol. Point taken
I liked the back story. Not too long and sets perspective.
It's a 10 minute video showing you how to do something important. Have some patience.
Good video
Thanks.