Hi George, great job, but would it not be far easier to simply wind another set larger gauge of coils on top of the existing ones to get a transformer effect from the second windings as well as an additional motoring effect from them. It draws far less current as well. Thank you
Wait what? Ive not new to the diy but im no expert on the finer motor "adjustment". My current goal is too alline my rv roof (2 tall side to side) with small computer fan engines like this. Too charge 2 big deepcycle batteries (12v system). Id be open to any input you might be willing to give on both your winding technique and my prodject.
Noise was like Eleventy million cats in a blender with a hangover in a broke down minivan in a blizzard with 5 feet of snow and you're out of gas and the nearest off ramp is 12 miles away. Seriously dude that was impressive dedicated winding but that noise was death reversing in a 1,200 year old cemetery with unmarked graves..
Good works but I see you help the wing for turning why, this is not work? And you firstly remove the 3 fan cables then you connect 4 cables what is the difference in between? And the end of the work why you don't connect again the fan circuit, because you removed,
interesante, se tendría que probar con considerar poner capacitores de e de poliéster y polarizado. al final no se observa con claridad como hace la coneccion inicio con inicio, final con final o inicio con final de cada polo , gracias por el aporte
Buying one helps my research tremendously, helping me get all the supplies I need for the future. Visit my store on ebay: www.ebay.com/usr/eleman-gc
Ha
I could follow every single step. nice job. I enjoyed it very much. light and zooming was incredible also.
Hi George, great job, but would it not be far easier to simply wind another set larger gauge of coils on top of the existing ones to get a transformer effect from the second windings as well as an additional motoring effect from them. It draws far less current as well. Thank you
Wait what? Ive not new to the diy but im no expert on the finer motor "adjustment".
My current goal is too alline my rv roof (2 tall side to side) with small computer fan engines like this. Too charge 2 big deepcycle batteries (12v system).
Id be open to any input you might be willing to give on both your winding technique and my prodject.
Worth sharing!! Could you please tell about the material used in stator?
I need it for simulation purpose
Thanks for the video you just taught me a bunch !
You and GentleWhispering with that ethereal intro music : )
Noise was like Eleventy million cats in a blender with a hangover in a broke down minivan in a blizzard with 5 feet of snow and you're out of gas and the nearest off ramp is 12 miles away.
Seriously dude that was impressive dedicated winding but that noise was death reversing in a 1,200 year old cemetery with unmarked graves..
Dude, 😅😅😅
Bor was für ein toller Lötkolben!👍
Verry nice thanks for video
que arte! gracias por la explicacion. Saludos desde Espanha
Good works but I see you help the wing for turning why, this is not work?
And you firstly remove the 3 fan cables then you connect 4 cables what is the difference in between?
And the end of the work why you don't connect again the fan circuit, because you removed,
How to turn it on with DC voltage? ( Negative / Positive )
Hi, awesome channel. Have you tried rewinding a ceiling fan motor yet? Want to use mine?
Thanks! mayby, stay tuned...
Illy e waiting
Felicitari🎉pentru ce faci
This fan very beautiful
Vc merece like pq detalhou todos os detalhes da quantidade de espiras mesmo não falando no vídeo vlw
Nice video! May i know if you use a larger size of coper? I want to speed up my fan. What size do you prefer?
Use thick wire but not too thick
Good project and the plans of the plate please,Thank you
interesante, se tendría que probar con considerar poner capacitores de e de poliéster y polarizado. al final no se observa con claridad como hace la coneccion inicio con inicio, final con final o inicio con final de cada polo , gracias por el aporte
what did you put in the fourth pin for? The stator had only 3 connections. Regards
5:35, this is from the diode pin!
Controller pcb circuit plz...
does any one know where i can get 2 mmg-041 hamlin effect bedini control boards/cheers with 2 blue capac- on end of board
U should use hall sensor! Without hs this fan wasting some current. And what is this annoing sound?
its amazing
Good video
Bro you are legend great thanks
Can it achieve over unity?
Can we increase rpm of this fan
I followed every single step interestingly but at the end ,we have to move fan by finger.
requiere poner condensador de poliéster y otro electrolítico para el arranque ya que es sin escobillas , motor trifasico
Qoboltu gus insya allah barokah untuk gus dan keluarga,saya ingin mengamalkannya minta izin gus barokahnya
Thank you
Brother, I need your help a little bit
13:56
Those heavy breathing makes it hard to watch hahah
25:58 I thought there was an air raid warning... lol my age is showing....
If you make different color wire ...that be much better for know that.... connection
why need rewind that? its alredy 12v 0.15a from china shop.. i thought you were at least increasing amperage at 12v.. wat a timewaste!
I think he bored because Corona so he did this
Make it run on battery🔋
you forgot to put oil then upside down.
Hi George, I'd like to contact by e.mail in order to present u an update of bedini fan motor projet.
A música é muito bonita.
💣
👍👍👍👍👍👍👍👍
Thanks
Dream on!
hi sir this board circuit digram send me
www.free-energy-info.co.uk/Ch6/Fig26.gif
WIND BLADES
double wrapping in a rotor ..... scrawl
Karamci TV
*AGGRESSIVE BREATHING*
Wow, the greatest respect for your skills ....but please find a new hobby.