Variator originar vs variator upgraded scooter honda pcx ... honda spree
HTML-код
- Опубликовано: 14 окт 2021
- here we see how the original variator and an upgraded variator
the upgraded use it 2 years I have done over 150000 km and again litoui flawlessly, of the worst balls if you put again 100% will yield no matter if it is time to change the balls its yield will be again 100%, As far as the original is concerned, we all know more or less how it works and until the bellt arrived when it came time to change the rolles, for example, with a 105 or 107km roll
how to put magnet in the oil plag honda pcx & other scooters
• put magnet in the oil ...
#Variator #originar #vs #upgraded #DIY #upgraded #factory #pcx150 #pcx125 #scooter #honda
music DK Beats
• [FREE] Freestyle Type ... 
Авто/Мото
You make the best videos ever!! 👌
Good job 👍👍
Hi bembeng thank you very much!!!
Is it damage the engine? Or CVT belt?
very good video
Thanks!!
Good Broo
Thank you very much!!! have you changed the image on your channel?
What song is this?
More the top speed, acceleration decreases
And vice-versa
How much pressure do you aply with the pistol to the bolt and nuts of the variator at the en of the build
Very correct question we never tighten pistol Hi Brick Ariasvalidor's villa is very dangerous he wants by hand with a wrench that holds against 12 to 13 kg at most to unscrew with a gun you can unscrew whatever you want to screw this screw is dangerous because it is the shaft of the connecting rods.
m.ruclips.net/video/YmAK1D2z_mg/видео.html
my friend, I would appreciate if you tell me what is the difference between these two variators, what kind of operation was done to this variator.
ruclips.net/video/H1o8aWGsuzE/видео.html
I have done this here
The speed meter is on the first wheel not in the back one so how you measure speed from sanding ?????
you are wrong on the pcx it has been on the rear wheel for many years
Good job man , really impressive work and testing process looks amazing!
I saw all your videos and just want to ask u , which is the best recipe to make this bike go faster than the factory
I have the psx 150 2013
Thanks a lot
Greetings from Canada
Hi Kristian You simply bring the stops from the variator 130 km
So basically u make around with the roller?
@@wvdivwvrdhy341 I'm just comparing
Hello, please tell me what is the maximum width of tires (wheels) that can be installed on a Honda psx 150 KF18 scooter?
for those smaller in width, there is a possibility that it can fit in very easily, because of how wide everything is tight, tight inside, I don't think it fits anything bigger, thank you
@@MBPATENTS 🙏
Can we use dr pulley roller on upgraded variator!? Will it work fine?!
Dr pulley it's the best there is yes
Sir how about the life span of the belt and the pulley that are upgrade..which is better
Hi Orville right now I'm testing the factory belt, it took 28,000 km and something I'm trying four different brands of straps to see which one will last the longest Soon I will upload it as a video to see which one is better as a strap the belt gets more mileage on the upgraded validor.
Hi MB PATENTS, i have pcx 125 model 2015 and i want to change some things to increase the top speed beacause i can barely reach 100km/h max. What is your advise to increase top speed ?
Hi hoven You don't need to buy anything, if you make the validor that has the machine on it, you will be very pleased, that is, if you bring it, I will close it on the outside plate!.
m.ruclips.net/video/H1o8aWGsuzE/видео.html
@@MBPATENTS what speak English.
Haha sorry! Most of the time I don't have help with the comments and I don't speak English very well, so I get Google to translate what I'm saying, but it's not the right translation as it seems 😅
Does this work in Teyin Okinoi Activia 150 cc (chinese),I bought it brand new.What do you think do these work in chinese scooters?
Hi endrit Here I divide 2 bariatar plant one is vetiomeno and the alo normal. AL!!! A di shqip
Great video, thanks. Usually more top end means less low end torque, how did that work out for you?
Hi Adam Thank you for your attention!!!😀
Answer the question!
I don't understand the question. Explain better
Lol wth
@@MBPATENTShow did the modifications change the scooters performance.
how to upgrade the variator or where to buy it
m.ruclips.net/video/H1o8aWGsuzE/видео.html
its own variator you make the one it has on
Halo..i have slider roller like u. So on your custom variator, slider roller still can work perfectly?
Even u do some modification on roller track ?
I thought the roller will turn upside-down
The only thing I know from my side and from Mikra is my bike that everything works perfectly and after so many years of twelve-hour work with the same bike in a short time I will announce And the kilometers it has done even the damages There were on this bike there was no problem with the variator Thank you for your comments
Wish pcx can acc like that lol
Is the upgraded variator actually smarter than the factory radiator because I have one that is smaller than the original
It makes a huge difference.
@@MBPATENTS man I'm sorry it should of read smaller not smarter lol I have a variator smaller than the factory one is it safe to put on wondering if I'll have a belt issue and tha k you for the response and help
Too vaque
Whats the fuel consumption comparison?
I didn't want when you upgrade the variator, the step increases and it becomes even more economical
Keep 110cc carburettor and pickup coil to your scooter and I did for my scooter millage was now per liter 63km
Hi fant I haven't worked on the engine yet when I do and experiment with the engine you will know what I will do to improve thank you very much!!
I heard that you can take the (sproeier) out drill the hole than put the sproeier. Back it gives more gasoline you know of that works ? Or you just fucking up a carb like that ?
Purple 89 Hindi ko maintindihan sinabi mo sa akin kung ano ang gusto mong gawin?
καλησπέρα, έχω ένα pcx 125 2023 και θέλω να το κάνω να πηγαίνει καλύτερα. Εκτός από μπίλιες Dr Pulley τριγωνικές τι άλλο να βάλω?
για να μεγαλώσει λίγο η ταχύτητα να γίνει πιο μακρύ απλά αφαιρίστα stop εάν θέλεις να πηγαίνει καλύτερα βάλε ένα κεντροφόρο μία εξάτμιση μία ερώτηξέλιξη και θα δεις τεράστια διαφορά δεν σου λέω για πιστόνια για μεγαλύτερα πράγματα
@@MBPATENTS εννοω χωρις να πειραξω το μοτερ μονο μεταδοση
Ilan grams ang stock flyball? Also ilan grams nang dr pulley nilagay mo?
Hi AJ Cajegas Black is 16 g and white is 10 grams. In this video he describes the operation of the variatoe. If you liked it, do it subscribe Thank you!!
Ne işlem yaptığını Türkçe açıklayabilir misiniz?
sorry English only, or Albanian
Bro I did this to my Honda Dylan 150cc upgrade vario plus dr pully 10 gram I think my belt comes all the way up to the blok it scraped a piece off ahahahha put back normal rols in there at 9 gr problem seems over dr pully are 10 gr ( I like that better gr wise )
Ηi Purple 89 Ilan ang gramo ng iyong orihinal na roller? Mas magaan ang roller mula sa pabrika, mas pinipigilan ang sinturon batay sa tagsibol na kinakalkula ng gumagawa, dahil kung maglalagay ka ng isang mahirap na tagsibol, ito ay tulad ng paglalagay ng isang light roller. Ano ang ginawa mo gawin?
WHAT ARE YOU SAYING SPEAK ENGLISH.
Hello brother I was just searching some things about pcx’ as I have one myself and came across your channel .
I’m from the Uk and want to say what great videos you make . Question : do you know where I could buy one of these ? Any recommendations? And also how does it affect mpg consumption if cruising around 70mph?
Welcome, thank you very much for your kind words!!! As for the consumption, they have to do with the weight of the balls and the hardness of the spring in the centrifugal, the heavier the balls, the less your bike consumes, the lighter they are, they also consume more in the spring the harder it is, it consumes more, the softer it is, it consumes less
Tell me what exactly you want to do on your motorcycle, whether you are traveling or close to town
m.ruclips.net/video/n4wxvyvuJ_E/видео.html
@@MBPATENTS well bro , I have a pcx 125 and it goes around 56/57mph . The fuel consumption is about 110/120mpg depending how hard and fast I drive .
I wanted to increase the top speed by a bit while retaining the fuel consumption to a similar level as I drive around 8h a day but I like driving a tad fast at times so it keeps me entertained while working
I believe the balls on my 125 pcx are the stock one , I don’t know whether you suggest keeping it the same or changing it up . But like I said , I’d like to keep the fuel consumption to around 100mpg while also increasing the top speed by a bit , hence why I asked if you know where I can buy an upgraded variator as I do not know how to do it myself
Yes top speed upgrade better. Is original acceleration better than upgrade?
Hi king Depending on how heavy the balls are and how hard the rear spring is on the centrifugal
pour sh 125 smart 2018
DR. PULLEY
Δεν επειρεαζει την επιταχυνση;
Βέβαια. Λειτουργεί σαν σασμαν.
125? or 150?
Hi tsepeto I have the 150 but also the 125 the same is.
15 gr,?
120km
120km????
@@MBPATENTS 15 gr 120km?
Clean your Variator-House . Dam its is dirty
Well I work on cars and motors what do you expect? I have no clinc. I saw your video, well done!
@@MBPATENTS link to my video so i know what you mean...
What I am trying to tell you about cleaning your Variohus, If your block is smeared with a small layer of grease from dirt and grime, your engine will have difficulty getting rid of the heat. and thereby you lose effect.... plus, if it's clean, you also get rid of it coming, being on your V-belt and clutch trays etc etc .....
However, I do not work in cars on a daily basis or as a hobby, but I work in scooters which are used for track driving and I also work in scooters as a hobby on a daily basis.
@@bp-tuningaeroxlc-dd6474 in a little while I will reach 1000000 1 million kilometers 12 13 hours on the pcx that kinopio is tested when I reach 1 million km I will explain the + and the - so far I have not had any problems I think I have you covered thank you for your interest!!!