Thank you for taking the time to watch it again! I'm thrilled that you found the video deep and resourceful. Your feedback keeps me motivated to create more valuable content. 😊
Thank you Engineer, this partly answers my quest of where i requested a video describing different parts on the motherboard, their functions, the common issues they face and how to fix them. I atlest have a glimpse. Thank you
Hello from Nova Scotia! Thank you for the kind words. I'm glad you enjoyed the detailed voice-overs and component value descriptions. Please let me know if you need more assistance or have any specific requests!
@idrees tech where can i buy the reflowing tool you used on the ps3 in this video? i know it will be expensive but it will make up for the amount of dead ps3s I have laying around
You can purchase reflowing tools from various online retailers and specialized electronic repair equipment suppliers. Here are a few options to consider: Amazon: They have a wide range of reflow stations and related tools. Look for brands like Quick, Weller, and Hakko, which are known for their reliability and quality. Example: Quick 861DW Hot Air Rework Station eBay: You can often find both new and used reflowing tools at competitive prices. Just make sure to check the seller's reputation and reviews before purchasing. AliExpress: A good source for more budget-friendly options, though shipping times can be longer. Brands like BGA and ACHI offer affordable reflow stations. Example: ACHI IR6000 BGA Rework Station Specialized Electronics Suppliers: Sites like Digi-Key, Mouser, and RS Components offer a variety of professional-grade tools for electronics repair. Reflowing stations can indeed be an investment, but they can save a lot of PS3s and other electronics from the landfill. Good luck with your repairs!
Hi may friend first off excellent video as,always I was wondering if you could answer a question for me the offline jb for the ps3 could this be done on the esp 32 chips or the picofox that does the ps4 auto jb once again many thanks for your time
Hello Master! I wanted to ask for advice. I am repairing my PS3Superslim with the msx-001 board. The stabilizer burned out and a voltage of 5V appeared on the wifi module. The Marwell chip has received a short circuit. I replaced the stabilizer, restored 1.8V. I replaced the marwell chip, but the console writes 8002F1F9. The resistors or capacitors in the WiFi module are probably damaged. It is possible to install a wifi module from the 3000 series from MPX-001. Have you come across such compatibility?
My problem is a green light followed by immediate shut down and no red light until I press the power button again. The two feedback coupling resistors for the first dc to dc converter on the back measures at 382 and 266 Ohm... So I guess they're fried and need changing? The motherboard is a JDS-001 belonging to a cech-2500 unit (so same as shown in your video). Also could you provide the values for the two bottom right ones below the pwm controller during the last step? The display goes off screen for those two in the video.
@phooopy7941 Your resistor measurements of 382Ω and 266Ω are within the acceptable range for the feedback coupling resistors, so they seem fine and don't need replacement. For the two resistors below the PWM controller in the last step, the values are shown around 20K connected at pin No 16 and 10K at pin No. 21. If you're still encountering issues, it might be worth checking and ensuring the PWM output signals are stable. Let me know if you need further help!
@idreestech The lower one out of the two measures 35.9 kOhm and the upper one measures 137.5 kOhm. They're the horizontally aligned ones below the pwm chips indicator for pin 1.
Hello. Tell me about the third row of elements near the chip in the corner of the board. Those that go to 2 memory chips. You haven't checked them. My last pair that goes to the memory chip differs greatly in readings from the rest in the 3rd row. What kind of elements are these?
@ Are you talking about the 3rd row of elements? I just watched all your videos on PS3 diagnostics and you don't check this 3rd row anywhere, measuring only the first and second row of elements. Do capacitors check by resistance? Or is this an indirect indicator of a malfunction?
focus on the 1st and 2nd rows because they are usually directly connected to critical components like the CPU, GPU, or RAM and are more likely to fail. However, the 3rd row also plays an essential role in stabilizing circuits. Using a multimeter with a capacitance function or an LCR meter provides a direct and more accurate check of the capacitor’s value. If you suspect issues in the 3rd row, it’s worth testing both resistance and capacitance to ensure all components are functioning properly.
I tried to jumper a resistor like you did on your PS2 video because I had a glitchy screen and managed to find the place where the issue is. Unfortunately i seem to have burned that part of the board a little and failed to solder with precision. It's a bit of a mess now in that area, is there a way to fix that or is the motherboard just dead now?
I'm sorry to hear about the trouble with your board. If the area is a bit of a mess, you might still be able to fix it with some careful work. Try these steps: Clean the Area: Use isopropyl alcohol to clean the area around the damaged part to get rid of any solder flux or debris. Just clean off the excessive solder using a solder wick. Inspect the Damage: Look closely for any burnt or damaged traces. Sometimes you can repair small traces with a bit of wire or conductive paint. Resolder Carefully: If possible, use a fine-tip soldering iron and some flux to carefully resolder the connections. Make sure you don't short any adjacent pins or components. Check for Continuity: Use a multimeter to check for continuity in the affected area to ensure there are no broken connections. Consider Professional Repair: If the damage is extensive, it might be worth consulting a professional repair service. They have specialized tools and techniques for fixing damaged PCBs. It's worth giving it a try if you're comfortable with the repair process, but if it’s too complex or the damage is too severe, it might be best to replace the motherboard or seek professional help. Good luck!
@@idreestech Thanks for getting back to me, yes I underestimated the precision that would be required. I only have one soldering iron and it's got quite a thick chiseled tip. I will do what you say and see what can be done.
Hi my friend sorry to keep asking questions could you tell me what your scooe is ive been looking at them on Ebay i do custom ps3s and sell them on there wished you lived in manchester my good man many thanks for your time from vini
No problem at all, Vini! I'm here to help. When it comes to oscilloscopes, you want one that's reliable for the kind of work you're doing with PS3s. A good entry-level scope that many find useful for console repair is the Rigol DS1054Z. It's a 4-channel, 50 MHz scope that's widely praised for its performance and price. If you're looking for something a bit more advanced with higher bandwidth, the Siglent SDS1104X-E is another excellent choice. It's also a 4-channel scope but with 100 MHz bandwidth, which might come in handy if you need more detailed analysis. Both models are popular among electronics hobbyists and professionals alike, and they should be available on eBay. The key is to make sure the scope has enough bandwidth and sample rate for the kind of signals you're dealing with, as well as enough channels for more complex diagnostics. It’s great to hear about your custom PS3 work! If you ever need more advice or want to chat about your projects, feel free to reach out. If I were in Manchester, I'd definitely stop by to check out your work!
Good video, theres some lessons to learn here, but I couldn't help but notice the ps3 you're testing has the black CPU, the one you're reflowing has the common brownish CPU🤷🏾♂️
Hello! I'm trying to fix a PS3 Slim 2504A which is stuck in an update loop. At around 50% of progress it gives the error "8002F14E", which is often associated with a broken Blu Ray Daughter board. But the 2504's disc drive doesn't include a daugtherboard, so what could the issue be?
@@idreestechThanks for the answer. I received the console without an hard drive, so I put a new one in. It booted straight into safe mode, and now when I turn it on it goes straight to updating, I can't access the XMB therefore I can't patch the flash memory and install no-bd. Are there any other solutions?
Check for Hardware Issues: Even though the PS3 Slim 2504A doesn't have a separate Blu-ray Daughter board, check the connections and ensure that the Blu-ray drive and related cables are properly connected and in good condition. And the components related to the DVD drive cables as well. If these steps don't help, you might need to consult a professional repair service or check for more detailed diagnostics. Good luck!
@@idreestech Thanks again for the answer! I'm lucky to have 2x 2504 PS3s, I've already tried swapping the Drive for another one but noticed no differences, so I think I'll compare the resistances near the Blu-Ray chip and swap them if needed. If this method doesn't work, I'll probably buy a Nor Flasher.
Is the reflow process sufficient for the PlayStation 3 if the device works after reflowing, or is reballing necessary? I want you to answer this question based on your extensive experience in this field.
In my experience, the reflow process can be a temporary fix for a PlayStation 3 with issues like cracked solder balls or poor connections. Reflowing involves heating the entire board or specific areas to re-melt the solder and re-establish connections. This can sometimes bring a non-functioning console back to life, but it's not always a permanent solution. Reflowing may resolve the issue for a short period, but the underlying problem might resurface due to the nature of the original lead-free solder, which can develop micro-fractures over time, especially in devices that generate a lot of heat like the PS3. Reballing, on the other hand, involves removing the chip entirely, cleaning off all the old solder, and applying new solder balls before reattaching the chip to the motherboard. This method addresses the issue more thoroughly and can provide a more lasting repair because it replaces the potentially defective solder with fresh solder, reducing the chance of future failures. Therefore, while a reflow can be a quick and easy fix to get your PS3 running again, reballing is generally recommended for a more permanent solution. If you find that reflowing works initially but the problem returns, reballing would be the next step to consider.
hi i have A0805FFF error on syscon. ps3 just boot fine after unplugged for an hour . then it freeze for about an hour of standby or gameplay. then when you turn it on it is on GLOD state. you need to unplugged it for about an hour to bootsm it again. hdd activity cuts off even controller disconnects but the display remains on . hdd replaced same problem
In recent times, this error has been known for the CPU (CELL), but it is actually due to an error in the NOR of the Playstation 3 SLIM/SUPER SLIM. Due to a failure when performing the exploit, you can end up having a console Bricked, for this use E3 FLASHER, Tennsy.etc For 3XXX, 4XXX consoles, the BRICK WITH Tennsy can be solved. in 4XXX keep in mind that the NOR can be emmc (12GB) therefore it will not be possible to solve it (for now...) for Super Slim reflow or reball RSX
The A0805FFF error can often be misdiagnosed as solely a CPU (CELL) issue, but it's increasingly recognized as stemming from a corruption in the NOR flash, especially on PS3 Slim and Super Slim models. Here's a breakdown for clarity: Issues during exploit installation or general flash corruption can lead to a bricked console with symptoms like freezing, GLOD, or failed boots. When the error manifests as graphical or general instability, reflowing or reballing the RSX can sometimes resolve issues. However, this should be considered a last resort and done with precision to avoid further damage. While less common, the CELL can occasionally be the culprit. 3XXX & 4XXX: Both can benefit from NOR reprogramming, but remember: 3XXX: Generally repairable using E3 or Teensy. 4XXX: Requires additional caution. If the NOR is an eMMC (common in 12GB models), current tools cannot reprogram or repair it.
@@idreestech thank you 🙂 for that information you are so great on repairing console 🥰 . mine is 21xx series. can i flash the nor via teensy++? im not a tech but can do soldering and basic programming . assuming i took the bad dump can i patched it ?
@@idreestech hi i think you're right the problem is within nor. I managed to flashed OFW and the problem seems gone. the devices is up for about 14hours now with out hang
When I perform a downgrade on the PlayStation 4, even though the Syscon chip accepts the downgrade, the PS4 WEE Tools program gives me a "Not Patchable" message. Why does this message appear?
You’re absolutely right-reheating the IC can be a temporary fix, but a proper reballing is the long-term solution. If the solder joints under the IC are cracked or damaged, reballing ensures a more stable and reliable repair. Thanks for pointing that out! 👌
Thank you for sharing. Please when you have time do an in depth tutorial on oscilloscope from basics and do more details like what you are measuring and what is the benefit in console repair and what we can do with digital oscilloscope although you may not have one.
Здравствуйте! Извините, я не говорю на русском языке, но могу помочь, переведя ваши вопросы или запросы на английский. Пожалуйста, напишите, что вас интересует, и я постараюсь помочь! 😊
Также как и у вас на видео включаешь она включается но кулер не работает в полную силу и через несколько секунд она выключается я отнёс её к мастеру он посмотрев ролики на ютубе кто скальпируют процессоры сказал что нужно заменить процессор заменили вообще не включается
I have rewatched this video in a settled mode and its really deep and resourcefull. Thank you once more.
Thank you for taking the time to watch it again! I'm thrilled that you found the video deep and resourceful. Your feedback keeps me motivated to create more valuable content. 😊
Congrats my friend, 🙏
Thanks for the visit😄
Amazing video and amazing work , thank you !) Keep going)
You're welcome! I'm glad to hear that the information was helpful.
goood
Thank you very much.
Thank you Engineer, this partly answers my quest of where i requested a video describing different parts on the motherboard, their functions, the common issues they face and how to fix them.
I atlest have a glimpse. Thank you
You're welcome! I'm glad to hear that the information was helpful.
Much prefer your voice over. :) It's awesome how you describe everything and component values. Thank You and hello from Canada, Nova Scotia.
Hello from Nova Scotia! Thank you for the kind words. I'm glad you enjoyed the detailed voice-overs and component value descriptions. Please let me know if you need more assistance or have any specific requests!
Good work sir
So nice of you
very nice video we are learning this videos ❤
Glad to hear that.
@idrees tech where can i buy the reflowing tool you used on the ps3 in this video? i know it will be expensive but it will make up for the amount of dead ps3s I have laying around
You can purchase reflowing tools from various online retailers and specialized electronic repair equipment suppliers. Here are a few options to consider:
Amazon: They have a wide range of reflow stations and related tools. Look for brands like Quick, Weller, and Hakko, which are known for their reliability and quality.
Example: Quick 861DW Hot Air Rework Station
eBay: You can often find both new and used reflowing tools at competitive prices. Just make sure to check the seller's reputation and reviews before purchasing.
AliExpress: A good source for more budget-friendly options, though shipping times can be longer. Brands like BGA and ACHI offer affordable reflow stations.
Example: ACHI IR6000 BGA Rework Station
Specialized Electronics Suppliers: Sites like Digi-Key, Mouser, and RS Components offer a variety of professional-grade tools for electronics repair.
Reflowing stations can indeed be an investment, but they can save a lot of PS3s and other electronics from the landfill. Good luck with your repairs!
@@idreestech thanks for responding. Appreciate it a lot 🙏
You r WC!
Hello, where from do you know all the values of resistor and caps ?
From my practice.
Looks like another good video
Thanks 👍
Thanx master ❤️🇹🇷
Thanks!👍🏼
Hi may friend first off excellent video as,always I was wondering if you could answer a question for me the offline jb for the ps3 could this be done on the esp 32 chips or the picofox that does the ps4 auto jb once again many thanks for your time
Not that I know of
Hello Master! I wanted to ask for advice. I am repairing my PS3Superslim with the msx-001 board. The stabilizer burned out and a voltage of 5V appeared on the wifi module. The Marwell chip has received a short circuit. I replaced the stabilizer, restored 1.8V. I replaced the marwell chip, but the console writes 8002F1F9. The resistors or capacitors in the WiFi module are probably damaged. It is possible to install a wifi module from the 3000 series from MPX-001. Have you come across such compatibility?
Yes, you can swap it with any number of other board. The version written on the module should be same or above.
@@idreestech Thank you!
Hi what I need to for replacing the 33ohm resistors? Is the actual value of the resistor 33ohms?
Yes you need a resistance of 33 ohms for coupling and its actual value is also 33 ohms, you can also try a jumper on it.
@@idreestech by jumper you mean a direct connection in some cases, right?? 🤪
My problem is a green light followed by immediate shut down and no red light until I press the power button again.
The two feedback coupling resistors for the first dc to dc converter on the back measures at 382 and 266 Ohm... So I guess they're fried and need changing?
The motherboard is a JDS-001 belonging to a cech-2500 unit (so same as shown in your video).
Also could you provide the values for the two bottom right ones below the pwm controller during the last step? The display goes off screen for those two in the video.
@phooopy7941 Your resistor measurements of 382Ω and 266Ω are within the acceptable range for the feedback coupling resistors, so they seem fine and don't need replacement. For the two resistors below the PWM controller in the last step, the values are shown around 20K connected at pin No 16 and 10K at pin No. 21. If you're still encountering issues, it might be worth checking and ensuring the PWM output signals are stable. Let me know if you need further help!
@idreestech Do you have any video that can walk me through that process, or are there some good written guides online?
In all my videos, I probably discuss all these things, so if you watch my videos, you will find a lot in them.
@idreestech Will have a look later👍
@idreestech
The lower one out of the two measures 35.9 kOhm and the upper one measures 137.5 kOhm.
They're the horizontally aligned ones below the pwm chips indicator for pin 1.
Yellow light DOESNT MEAN THAT NEC TOKIN IS FAULTY. It can be a NEC Tokin fault but anyone should see the error log with the SYSCON.
I don't use UART for error logs as it seems useless.
@@idreestech In your case, there would be no errors but if there was YLOD you had to use UART syscon check.
I usually diagnose YLOD with the help of an oscilloscope, checking for distorted signals in the CPU or the GPU power rail.
@@idreestech That is a very good idea. I give you props
Hello. Tell me about the third row of elements near the chip in the corner of the board. Those that go to 2 memory chips. You haven't checked them. My last pair that goes to the memory chip differs greatly in readings from the rest in the 3rd row. What kind of elements are these?
These are coupling capacitors and resisters, if resistance value is high enough (should be around 10,12,14 and 17 ohms) it must be replaced.
@ Are you talking about the 3rd row of elements? I just watched all your videos on PS3 diagnostics and you don't check this 3rd row anywhere, measuring only the first and second row of elements. Do capacitors check by resistance? Or is this an indirect indicator of a malfunction?
focus on the 1st and 2nd rows because they are usually directly connected to critical components like the CPU, GPU, or RAM and are more likely to fail. However, the 3rd row also plays an essential role in stabilizing circuits. Using a multimeter with a capacitance function or an LCR meter provides a direct and more accurate check of the capacitor’s value. If you suspect issues in the 3rd row, it’s worth testing both resistance and capacitance to ensure all components are functioning properly.
I tried to jumper a resistor like you did on your PS2 video because I had a glitchy screen and managed to find the place where the issue is. Unfortunately i seem to have burned that part of the board a little and failed to solder with precision. It's a bit of a mess now in that area, is there a way to fix that or is the motherboard just dead now?
I'm sorry to hear about the trouble with your board. If the area is a bit of a mess, you might still be able to fix it with some careful work. Try these steps:
Clean the Area: Use isopropyl alcohol to clean the area around the damaged part to get rid of any solder flux or debris.
Just clean off the excessive solder using a solder wick.
Inspect the Damage: Look closely for any burnt or damaged traces. Sometimes you can repair small traces with a bit of wire or conductive paint.
Resolder Carefully: If possible, use a fine-tip soldering iron and some flux to carefully resolder the connections. Make sure you don't short any adjacent pins or components.
Check for Continuity: Use a multimeter to check for continuity in the affected area to ensure there are no broken connections.
Consider Professional Repair: If the damage is extensive, it might be worth consulting a professional repair service. They have specialized tools and techniques for fixing damaged PCBs.
It's worth giving it a try if you're comfortable with the repair process, but if it’s too complex or the damage is too severe, it might be best to replace the motherboard or seek professional help. Good luck!
@@idreestech Thanks for getting back to me, yes I underestimated the precision that would be required. I only have one soldering iron and it's got quite a thick chiseled tip. I will do what you say and see what can be done.
❤ Thanks master .. And Selamün aleyküm.
WaAlaikumAslaam
Any tips for ps3 8002f147 while updating ?
Welcome back
Thanks 👍🏼
Hi my friend sorry to keep asking questions could you tell me what your scooe is ive been looking at them on Ebay i do custom ps3s and sell them on there wished you lived in manchester my good man many thanks for your time from vini
No problem at all, Vini! I'm here to help. When it comes to oscilloscopes, you want one that's reliable for the kind of work you're doing with PS3s. A good entry-level scope that many find useful for console repair is the Rigol DS1054Z. It's a 4-channel, 50 MHz scope that's widely praised for its performance and price.
If you're looking for something a bit more advanced with higher bandwidth, the Siglent SDS1104X-E is another excellent choice. It's also a 4-channel scope but with 100 MHz bandwidth, which might come in handy if you need more detailed analysis.
Both models are popular among electronics hobbyists and professionals alike, and they should be available on eBay. The key is to make sure the scope has enough bandwidth and sample rate for the kind of signals you're dealing with, as well as enough channels for more complex diagnostics.
It’s great to hear about your custom PS3 work! If you ever need more advice or want to chat about your projects, feel free to reach out. If I were in Manchester, I'd definitely stop by to check out your work!
Great
You're welcome! I'm glad to hear that the information was helpful.
Good video, theres some lessons to learn here, but I couldn't help but notice the ps3 you're testing has the black CPU, the one you're reflowing has the common brownish CPU🤷🏾♂️
Good point, It is to show the reflow process as I could not record a video of the same motherboard.
Hello! I'm trying to fix a PS3 Slim 2504A which is stuck in an update loop. At around 50% of progress it gives the error "8002F14E", which is often associated with a broken Blu Ray Daughter board. But the 2504's disc drive doesn't include a daugtherboard, so what could the issue be?
Try an update via recovery mode with No BD.PUP
@@idreestechThanks for the answer. I received the console without an hard drive, so I put a new one in. It booted straight into safe mode, and now when I turn it on it goes straight to updating, I can't access the XMB therefore I can't patch the flash memory and install no-bd. Are there any other solutions?
Check for Hardware Issues: Even though the PS3 Slim 2504A doesn't have a separate Blu-ray Daughter board, check the connections and ensure that the Blu-ray drive and related cables are properly connected and in good condition. And the components related to the DVD drive cables as well.
If these steps don't help, you might need to consult a professional repair service or check for more detailed diagnostics. Good luck!
@@idreestech Thanks again for the answer! I'm lucky to have 2x 2504 PS3s, I've already tried swapping the Drive for another one but noticed no differences, so I think I'll compare the resistances near the Blu-Ray chip and swap them if needed. If this method doesn't work, I'll probably buy a Nor Flasher.
Is the reflow process sufficient for the PlayStation 3 if the device works after reflowing, or is reballing necessary? I want you to answer this question based on your extensive experience in this field.
In my experience, the reflow process can be a temporary fix for a PlayStation 3 with issues like cracked solder balls or poor connections. Reflowing involves heating the entire board or specific areas to re-melt the solder and re-establish connections. This can sometimes bring a non-functioning console back to life, but it's not always a permanent solution.
Reflowing may resolve the issue for a short period, but the underlying problem might resurface due to the nature of the original lead-free solder, which can develop micro-fractures over time, especially in devices that generate a lot of heat like the PS3.
Reballing, on the other hand, involves removing the chip entirely, cleaning off all the old solder, and applying new solder balls before reattaching the chip to the motherboard. This method addresses the issue more thoroughly and can provide a more lasting repair because it replaces the potentially defective solder with fresh solder, reducing the chance of future failures.
Therefore, while a reflow can be a quick and easy fix to get your PS3 running again, reballing is generally recommended for a more permanent solution. If you find that reflowing works initially but the problem returns, reballing would be the next step to consider.
@@idreestech Thank you very much. You saved me a lot with this answer because you are a reliable source
@@abdomoz7809 You're very welcome! I'm glad I could help.
nice
Thanks!
hi i have A0805FFF error on syscon. ps3 just boot fine after unplugged for an hour . then it freeze for about an hour of standby or gameplay. then when you turn it on it is on GLOD state. you need to unplugged it for about an hour to bootsm it again. hdd activity cuts off even controller disconnects but the display remains on . hdd replaced same problem
In recent times, this error has been known for the CPU (CELL), but it is actually due to an error in the NOR of the Playstation 3 SLIM/SUPER SLIM. Due to a failure when performing the exploit, you can end up having a console Bricked, for this use E3 FLASHER, Tennsy.etc
For 3XXX, 4XXX consoles, the BRICK WITH Tennsy can be solved. in 4XXX keep in mind that the NOR can be emmc (12GB) therefore it will not be possible to solve it (for now...)
for Super Slim reflow or reball RSX
The A0805FFF error can often be misdiagnosed as solely a CPU (CELL) issue, but it's increasingly recognized as stemming from a corruption in the NOR flash, especially on PS3 Slim and Super Slim models. Here's a breakdown for clarity:
Issues during exploit installation or general flash corruption can lead to a bricked console with symptoms like freezing, GLOD, or failed boots.
When the error manifests as graphical or general instability, reflowing or reballing the RSX can sometimes resolve issues. However, this should be considered a last resort and done with precision to avoid further damage.
While less common, the CELL can occasionally be the culprit.
3XXX & 4XXX: Both can benefit from NOR reprogramming, but remember:
3XXX: Generally repairable using E3 or Teensy.
4XXX: Requires additional caution. If the NOR is an eMMC (common in 12GB models), current tools cannot reprogram or repair it.
@@idreestech thank you 🙂 for that information you are so great on repairing console 🥰 . mine is 21xx series. can i flash the nor via teensy++? im not a tech but can do soldering and basic programming . assuming i took the bad dump can i patched it ?
or can i flash the ofw ? will it replace the corrupted nor?
@@idreestech hi i think you're right the problem is within nor. I managed to flashed OFW and the problem seems gone. the devices is up for about 14hours now with out hang
very Interresting video, until you mentioned reflowing the cpu.
Good point!
When I perform a downgrade on the PlayStation 4, even though the Syscon chip accepts the downgrade, the PS4 WEE Tools program gives me a "Not Patchable" message. Why does this message appear?
Dear, you are truly fortunate!
@@idreestech what do you mean?
It will last 6 months at most. You gotta make a reballing. 😊
😱Read the reply below.
@@idreestech So? It doesn't change it will last "at most" 6 months.
@@Thehustler01828 Good point!
Check if a reply to @qwealhur1109 will make sense.
@@idreestech I have no time, I'm cooking.
Should be reball this ic reheat is temporary work
You’re absolutely right-reheating the IC can be a temporary fix, but a proper reballing is the long-term solution. If the solder joints under the IC are cracked or damaged, reballing ensures a more stable and reliable repair. Thanks for pointing that out! 👌
Thank you for sharing. Please when you have time do an in depth tutorial on oscilloscope from basics and do more details like what you are measuring and what is the benefit in console repair and what we can do with digital oscilloscope although you may not have one.
Sure I will.
😊
Thanks!👍🏼
sir xbox 360 error E74
If I get a chance,I will.
Здравствуйте а вы русский знаете не могли бы вы мне помочь пожалуйста
Здравствуйте! Извините, я не говорю на русском языке, но могу помочь, переведя ваши вопросы или запросы на английский. Пожалуйста, напишите, что вас интересует, и я постараюсь помочь! 😊
Также как и у вас на видео включаешь она включается но кулер не работает в полную силу и через несколько секунд она выключается я отнёс её к мастеру он посмотрев ролики на ютубе кто скальпируют процессоры сказал что нужно заменить процессор заменили вообще не включается
Теперь она кирпич или её ещё можно сделать
И потом я увидел про вас
У вас есть возможность по видео связи пообщаться вк или телеграмм и показать что нужно прозвонить мультиметром