How to install Yamaha Star Bolt Tall Handlebars, Extended Throttle/Clutch/Brake Lines, and Grips

Поделиться
HTML-код
  • Опубликовано: 7 янв 2025

Комментарии • 149

  • @ramathorn24
    @ramathorn24 Год назад

    Currently in the middle of doing all of this, can't tell you how helpful this video is.

    • @chaparralmotorsports
      @chaparralmotorsports  Год назад

      Glad to hear you found it useful. Ride safe.

    • @mattwilkinson2229
      @mattwilkinson2229 Год назад

      Where did you find the bars? I've been looking for them but they are no longer carried everywhere I've looked.

  • @Stevehinken10
    @Stevehinken10 3 года назад +1

    Thanks for the video. I'll be referencing this when I install next week. I had a hell of a time tracking these bars down (in IL). I couldn't find them in stock online so I called about six dealerships until I located one set in Missouri. Most dealers showed a backorder status and they had no idea if they would be getting any back in stock. I think these bars look far better than the alternative Baron mini apes, so if you're interested in these you better get hunting.

  • @CenPapi
    @CenPapi Год назад +2

    Fun fact, you can use the stock cables from the Yamaha V-Star 950, they are 6 inches longer than the bolt cables but everything else is the same.

  • @chaparralmotorsports
    @chaparralmotorsports  10 лет назад

    +Manuel M No problem at all, we're happy the video was helpful to you! The kit doesn't specify what size washer it is. The inside diameter of the washer however is 14mm. What you can do is take the rubber damper off and see if you can match up the circumference. I hope this helps you out!

    • @ttouran
      @ttouran 8 лет назад

      this is a great video. Thank you very much. Where can I purchase the braided extended cables?

    • @chaparralmotorsports
      @chaparralmotorsports  8 лет назад

      Hi Touraj, thanks for watching and commenting. We sell the extended cables. Here is a link to the throttle cables: www.chaparral-racing.com/product/yamaha-extended-throttle-cable/1tp-f63b0-t0-00.aspx
      here is the brake cable: www.chaparral-racing.com/product/yamaha-extended-front-brake-line/1tp-f58e0-t0-00.aspx
      here is the clutch cable: www.chaparral-racing.com/product/yamaha-extended-clutch-cable/1tp-f63a0-t0-00.aspx

    • @ttouran
      @ttouran 8 лет назад

      Thank you very much.

    • @ttouran
      @ttouran 8 лет назад

      I am in the Bay Area. I sure wish I could bring my bike down there and have you all change the handlebars for me. I have couple of weeks off in November, I might ride it down and have you guys do the work on it. Thanks again.

    • @chaparralmotorsports
      @chaparralmotorsports  8 лет назад

      OK Touraj, sounds good. Best to check with our service department ahead of time and make sure they can get you in. Here is the number: 1-909-889-2761

  • @persiaarash
    @persiaarash 7 лет назад +4

    Absolutely love your videos!! will you guys ever post videos on the Bolt C-spec handlebar rising? the C-spec has clip-on bars and I'm pretty sure do not have the same type of cables as R-spec.

    • @ihateemael
      @ihateemael 4 года назад

      did you ever figure this out?

  • @depravedone
    @depravedone 10 лет назад

    Excellent video guys, didn't leave much to the imagination at all.

  • @leslieshort433
    @leslieshort433 3 года назад

    Would also like forward controls if you know where to get them from . Thanks for the videos !! Keep them coming

    • @chaparralmotorsports
      @chaparralmotorsports  3 года назад +1

      Hello Leslie, thanks for the kind words. You would probably be looking for the Yamaha Rider Foot Peg Relocation Kit, unfortunately we do not have that kit on our website and I am not sure if they are available from Yamaha anymore. You'd have to so a search for them. Sorry.

  • @RetiredTony
    @RetiredTony 8 лет назад

    Bad ass video man..thanks. I will be in your shop soon to visit...

  • @Man00ks
    @Man00ks 10 лет назад

    awesome video guys. I have a question for you. I bought the handle bars used and wasn't aware that they came with steel washers which of course, the guy who sold them to me didn't include them. Can you tell me what size the washers are to I purchase them from a third party? thanks

  • @anthonycorpus8947
    @anthonycorpus8947 8 лет назад +2

    where can I order those steel washers ?? that replace the rubber dampers . . .

  • @jellevanbeers2793
    @jellevanbeers2793 6 лет назад +4

    Hello, i’ve got another question. I live in Holland where most bikes have ABS. I read on forums that it is impossible to change bars on the Bolt with ABS as you can not make that cable longer. But i went to my local dealer here and he Said that the ABS cable has got nothing to do with the handlebar as it only Goes from the brake-disc to the engine..(so not to your brake-lever). Is this true? Or did he gave me the wrong info. I want these tall bars so badly, but i’m afraid i can’t change the bars.. thanks in advance!

    • @chaparralmotorsports
      @chaparralmotorsports  6 лет назад +3

      You can totally swap the bars on an ABS bike! Your local dealer is correct in the fact that the ABS line does not go up to the handlebar. Every line and cable up on the handlebars can be extended. Thanks for watching. - Kyle & the Chap Moto Team

    • @jellevanbeers2793
      @jellevanbeers2793 6 лет назад +2

      @@chaparralmotorsports Thank you so much, really needed that answer haha! Thank you for the reply!

    • @chaparralmotorsports
      @chaparralmotorsports  6 лет назад

      @@jellevanbeers2793 No problemo!

  • @AllSpace
    @AllSpace 3 года назад

    well worth the effort good job!

  • @emilchik01
    @emilchik01 2 года назад

    Hi, great job 👏👏👏 . I have a question: if i change factory handlebar on my Yamaha Bolt to 8 inch handlebar, have i need to change Gas/Clutch/Brake cables and electric cables? Or second question how many inches handlebar can install without changing any cables? Thanks alot

    • @chaparralmotorsports
      @chaparralmotorsports  2 года назад +1

      Hello, it's been a while since we shot this video but they were about 8" tall. Yes you will need to change your cables and clutch/brake lines.

    • @emilchik01
      @emilchik01 2 года назад

      @@chaparralmotorsports thanks ✌️✌️✌️

  • @nyvz695
    @nyvz695 9 лет назад

    Hey guys, thanks for the detailed video! One thing I am misunderstanding here. On the lower part of the risers I am not able to take out any rubber bushing. It's hard to see but I don't think I see one. Is there one on the bottom side? If I install the lower riser washer it will not sit flush with the top triple tree. Thanks!

    • @chaparralmotorsports
      @chaparralmotorsports  9 лет назад +2

      +KingOfLuck Hi thanks for watching. You only need to remove the rubber dampners that sit beneath the washers on the top side of the triple clamp. There are no bushing on the underside to remove. Just remove the dampners, put the included washers in their place, install the risers and and bolts, then slide the other set of included washers in place from the underside.

  • @kwb402
    @kwb402 Год назад

    Thanks so much for this video

  • @ladimiromoncada8152
    @ladimiromoncada8152 4 года назад

    Thank for the video I loved those handle bars can you please tell me what brand or where can I get them ? Thank you

    • @chaparralmotorsports
      @chaparralmotorsports  4 года назад +1

      Hello, they are the Yamaha Accessories Handlebars. We sell them on our website: www.chapmoto.com/yamaha-oem-handlebars-1tp-f61b0-v0-00

  • @kaitrack2696
    @kaitrack2696 4 года назад

    Hey togheter,
    @Chaparral Motosports.
    Nice Video- im from Switzerland an im also drivin a Bolt.
    I want to install the origin Apes like you do in video.
    Can you pls.tell what i exactly need for install.
    I mean what kind of new parts like cables and others.
    You will me make happy if you can tell me 👐👐.
    Good wishes from Switzerland
    Regards Kai

    • @chaparralmotorsports
      @chaparralmotorsports  4 года назад +1

      Hi Kai, thanks for watching our video, glad you enjoyed it. Here are the parts you'll need for the install, www.shopyamaha.com/product/details/tall-handlebars?b=Sport+Heritage+Accessories&d=47|47&f=2019|40&ls=yamaha-motor-company
      www.shopyamaha.com/product/details/extended-length-braided-stainless-steel-control-ca?b=Sport+Heritage+Accessories&d=47&f=2019|40&ls=yamaha-motor-company
      www.shopyamaha.com/product/details/extended-length-braided-stainless-steel-brake-line?b=Sport+Heritage+Accessories&d=47&f=2019|40&ls=yamaha-motor-company
      You should also probably pick up some new hand grips as well. Hope that helps.

    • @kaitrack2696
      @kaitrack2696 4 года назад

      You are the best🤘🤘thank you so much.

  • @alexissanchezfe23
    @alexissanchezfe23 8 месяцев назад

    Why we can't put this handlebar on bolt with ABS?

  • @antwoncorpus564
    @antwoncorpus564 8 лет назад

    great video. I just ordered some 10' window bars. wondering if I can go with the star cable extensions or would I have to use the Barron ones. ?? please help . and how much for the star cable kit ...thanks.

    • @chaparralmotorsports
      @chaparralmotorsports  8 лет назад +1

      Hi Antwon, thanks for watching. I' don't have any experience with 10" bars and the Star extended cables. Off the top of my head I'd say the Star cables probably won't fit seeing as how they are designed for the Star Tall Handlebars which are only about 5" tall. So you may need to look at the Baron's cables or I believe Motion Pro has some too (depending on the end rise of your bars you might be looking at cables that are in the neighborhood of 4-6" over stock). Maybe check with the shop you bought the bars from and see if they have any experience with the 10" windows/Bolt setup and see what they say. BTW, just a heads up, if you're running 10" bars you may find you need to extend the electrical connections as well. Hope that helps.

    • @antwoncorpus564
      @antwoncorpus564 8 лет назад

      Thanks for the info brotha. U guys rockkkkk

  • @louie111887
    @louie111887 Год назад

    So my Yamaha fairing will fit with these bars?! I’m really hoping.

  • @massimilianorossi5648
    @massimilianorossi5648 2 года назад

    hello thank you, but unfortunately today they told me that yamaha no longer produces this handlebar 😞
    As an alternative I can take baron
    BA-7350-08B HANDLEBAR SKINNY APE 8 '
    What do you think?

    • @chaparralmotorsports
      @chaparralmotorsports  2 года назад

      We haven't tried the Baron bars with these so we cannot say. Sorry.

  • @doniewilliams4280
    @doniewilliams4280 6 лет назад +1

    For the connector on the throttle side it’s very difficult to remove. Can you advise if the plug should be squeezed on the connector or pulled?

    • @chaparralmotorsports
      @chaparralmotorsports  6 лет назад

      Thank you for watching Donie. Either strategy can work, it just depends on which side of the connector you want to work from. On one side, you will depress the inside to move the little barb downward. Or you can use a small flat blade screwdriver to gently lift the tab on the top. Your choice. - Kyle & the Chap Moto Team

    • @doniewilliams4280
      @doniewilliams4280 6 лет назад

      Appreciate the response and I managed to remove by wiggling the connector out. One last question. The bar appears to be a little larger that stock. Is that normal? the clutch perch is peeling the paint off the bar as I try and slide the perch on. Any suggestions?

    • @chaparralmotorsports
      @chaparralmotorsports  6 лет назад

      No problem Donie, that is what we are here for. The Perch can be loosened and if you put a flat blade screwdriver in the slot and wiggle it a bit, you can "open the clamp a bit." When you tighten the screw it will all go back into its original position. It's not that the bar is bigger, it is the powder coat all the way around the bar that increased the outside diameter. Thanks for watching! - Kyle & the Chap Moto Team

    • @doniewilliams4280
      @doniewilliams4280 6 лет назад

      Just an update. Tried prying the gap to no avail. Sanded down the bar with a light sandpaper and sanded the inside of the perch and its now on. Thanks again for the help!

    • @chaparralmotorsports
      @chaparralmotorsports  6 лет назад

      Nice work Donie! Great work! - Kyle

  • @jellevanbeers2793
    @jellevanbeers2793 7 лет назад

    Love your vids! I Got One question, are those bars 1 inch bars? And do they fit the stock risers? Because the stock bar on the bolt is 7/8 inch right? Or am I completely wrong?... I am looking for an 1 inch bar, But i’m Worried I need to buy 1 inch risers too!

    • @chaparralmotorsports
      @chaparralmotorsports  7 лет назад

      Hi Jelle, the stock bars on the bolt are 1" in diameter. These Yamaha Tall bars are 1" as well so they work with the stock risers. Hope that helps. Thanks for watching. ---Eric

  • @thiccriichard
    @thiccriichard 2 года назад

    i got a 2022 bolt and bought the bitwell frisco set with a 7" rise do you think i will be fine with just the extended cables or is there wiring extensions i will need ??

    • @chaparralmotorsports
      @chaparralmotorsports  2 года назад

      Hello, those bars will have the switch housings sitting about 2" taller than on theses Yamaha Bolt Tall Bars. We've never installed the Frisco bars on the Bolt so we cannot say for sure or not that just by rerouting the switch wiring there will be enough slack to turn the bars left to right/stop to stop. You can try test fitting them, but yo may need to extend the wires.

  • @BesCheckYoTone
    @BesCheckYoTone 9 лет назад

    What's the size/diameter of the hole in the triple tree that the handlebar bolts go through??

  • @richardchamblin5194
    @richardchamblin5194 2 года назад

    I'm trying to find the measurements or a link for just the steel washers to replace the rubber dampeners; I'm installing after market custom bars and they don't come with any obviously. you guys able to help me out with that?

    • @chaparralmotorsports
      @chaparralmotorsports  2 года назад

      Hello, sorry it has been many years since we shot this video, we do not recall.

  • @religiousschool1311
    @religiousschool1311 3 года назад

    I have the tall handle bars (bought bike used and they were on bike) and want to add two more inches of rise. I bought the risers and realized I do not think the cables are long enough. Will I need extensions to add the risers.

    • @chaparralmotorsports
      @chaparralmotorsports  3 года назад

      Hello, without seeing your setup we can't say for sure, but from what you're describing it sounds like yes you will need longer throttle cables and brake line.

  • @gorillamad7544
    @gorillamad7544 4 года назад +1

    Would these bars work on a 2018 bolt R spec? If so how long would it take to install them on it if I ride down to ur shop?

    • @chaparralmotorsports
      @chaparralmotorsports  4 года назад

      Yeah they should work. You'd have to talk to our service department about install times. You can reach them by calling (909) 889-2761 x 120. The service department is open Tuesday-Saturday 10am-6pm.

  • @massimilianorossi5648
    @massimilianorossi5648 2 года назад

    I ask you for advice please, I have this same bike, yamaha XV950R,
    I am undecided whether to mount an 8-inch ape hanger like this one you mount in the video or a 12-inch one.
    I'm 178cm tall
    You who know the bike well what do you recommend?
    I don't want the hands to go beyond the shoulders
    a thousand thanks
    Maximilian

    • @chaparralmotorsports
      @chaparralmotorsports  2 года назад

      Hello, it's difficult to say because every body is different. Two people of the same height may have longer or shorter torsos or longer or shorter arm reach. So 12" apes may not be suitable or comfortable for two people of the same height. Also it may be dependent on the laws/regulations of your area. Some places state that the handlebars cannot be above shoulder height. Probably test fit a set of 8" bars to see if they are safe/comfortable and if you would prefer to go up to 12" bars.

  • @leng20t
    @leng20t 2 года назад

    hi i watched the whole video but I am still looking for answers. i have a bolt but my bike came the clip ons right on the forks looking to swap out. riding after a while my lower back is on fire. what's the easiest way to swap out and top mounted bars

    • @chaparralmotorsports
      @chaparralmotorsports  2 года назад

      Hello, take a look t this forum thread, it may help. www.yamahastarbolt.com/how-to's/c-spec-handlebar-conversion-no-extensions-required/

  • @massimilianorossi5648
    @massimilianorossi5648 2 года назад

    ok, since the handlebar you mount in the video does not produce it anymore, please recommend a handlebar you know as an alternative

    • @chaparralmotorsports
      @chaparralmotorsports  2 года назад

      Hello, there are other options available, it will be based on your style and what your want/need. Please check the Bolt forums for ideas.

  • @MG041987
    @MG041987 2 года назад

    Perfect
    Thank you so much

  • @michaelroberts7676
    @michaelroberts7676 8 лет назад

    You guys in SoCal? Do you have installation options on parts purchased at your store? I dont have the experience or tools for this add on.

  • @WRXinthe410
    @WRXinthe410 5 лет назад +14

    Yeaaaa, think ill just pay someone to do it.

    • @chaparralmotorsports
      @chaparralmotorsports  5 лет назад

      Ha! Sometimes that is easiest and most effective for your AND your machine... Wink Wink !

    • @surplusbuyerliquidator934
      @surplusbuyerliquidator934 5 лет назад

      Yea 💯 % damn man that seemed so difficult just to change out the Handel Bars 🥵 I'm buying a BOLT and he has some weird short handlebars on it , and the guy was like yeah it's pretty easy if you want to switch your handlebars , Now after watching this video I don't know if I even want to buy the motorcycle 😬

    • @HooDRidEWhiteY
      @HooDRidEWhiteY 5 лет назад +2

      @@surplusbuyerliquidator934 lol dont let that stop you!!!

    • @pinoyobserver1190
      @pinoyobserver1190 4 года назад

      hm would it cost to ship these to the philippines.

  • @cecilebellelumiere7009
    @cecilebellelumiere7009 9 лет назад

    many thx for your video =D

  • @Itsjustaaron_
    @Itsjustaaron_ 9 лет назад +2

    What bars are those ? I really like them.

    • @chaparralmotorsports
      @chaparralmotorsports  9 лет назад

      Aaron Leblanc Those are Yamaha's Star Accessories Tall handle bars

  • @alero1202
    @alero1202 9 лет назад

    Looks good, lotta work. But that looks worth doing!

  • @danielmulligan8422
    @danielmulligan8422 8 лет назад

    How long should a project like this take to complete? I'm not mechanically inclined so if I take it to the dealer I want to make sure their not charging me all day for a 2 hour job.

    • @chaparralmotorsports
      @chaparralmotorsports  8 лет назад

      +Daniel Mulligan it's a pretty straight forward swap, although there are several tasks involved. At the dealer it's probably like a 2-3 hour job, it depends on the service tech the performs the job. Whoever you take it to ask them to give you an estimate first.

  • @Lfscavacini
    @Lfscavacini Год назад

    After you change the dampers what torque specs for tight back the bolts?

    • @chaparralmotorsports
      @chaparralmotorsports  Год назад +1

      Hello, sorry it has been so long since we shot this video we do not recall. Refer to your owners manual for handlebar torque specs.

  • @izmacti93
    @izmacti93 4 года назад

    Will the spiegler front brake line work with mini apes ? 8in handle bars .

    • @chaparralmotorsports
      @chaparralmotorsports  4 года назад

      Hello, Ismael, as long as the brake ling is the proper length and has the correct fittings it will work. Thanks for watching.

  • @massimilianorossi5648
    @massimilianorossi5648 2 года назад

    Hello, is this bar fit for yamaha xv950r ABS latest version 2017-2020?
    Thank you
    Maximilian

    • @chaparralmotorsports
      @chaparralmotorsports  2 года назад

      Hello, yes.

    • @massimilianorossi5648
      @massimilianorossi5648 2 года назад

      hello thank you, but unfortunately today they told me that yamaha no longer produces this handlebar 😞

    • @massimilianorossi5648
      @massimilianorossi5648 2 года назад

      as an alternative I can take baron
      BA-7350-08B HANDLEBAR SKINNY APE 8 '
      What do you think?

  • @doniewilliams4280
    @doniewilliams4280 6 лет назад +1

    Hi..Do you have a part number for those grips?

    • @chaparralmotorsports
      @chaparralmotorsports  6 лет назад

      Thank you for your inquiry Donie. Yes Sir! The Avon Grips used can be found here: www.chapmoto.com/avon-grips-custom-contour-grips-parent-317-9253 - Kyle & the Chap Moto Team

  • @MrJoeconerty
    @MrJoeconerty 10 лет назад

    Is there specific cables that are required for yamaha star bolts? Or is it generic?

    • @chaparralmotorsports
      @chaparralmotorsports  10 лет назад

      Joe Conerty We used Yamaha Genuine accessories for our Bolt. Found here www.chaparral-racing.com/ymm/2014-YAMAHA-BOLT-R-SPEC/Controls-Handlebars and www.chaparral-racing.com/ymm/2014-YAMAHA-BOLT-R-SPEC/Brakes

  • @KodeGolf
    @KodeGolf 4 года назад

    Can you include the parts you used for the install?

    • @chaparralmotorsports
      @chaparralmotorsports  4 года назад +1

      Hi, thanks for watching our video. We used the Yamaha Tall Handlebars: www.chapmoto.com/yamaha-oem-handlebars-1tp-f61b0-v0-00
      Yamaha Extended front brake line: www.chapmoto.com/yamaha-oem-extended-front-brake-1tp-f58e0-t0-00
      Yamaha Extended clutch cable: www.chapmoto.com/yamaha-oem-extended-clutch-cabl-1tp-f63a0-t0-00
      And Avon Grips: ruclips.net/user/redirect?redir_token=SRbd1z0VBkp-PAZxPvS-JlQQu0Z8MTU4OTMwNjc0MEAxNTg5MjIwMzQw&q=https%3A%2F%2Fwww.chapmoto.com%2Favon-grips-custom-contour-grips-parent-317-9253&event=video_description&v=cUuWb6Or5AY

  • @zlatkozlatko1748
    @zlatkozlatko1748 2 года назад

    I like this handlebar, where can I buy it in Europe?

  • @dewkey941
    @dewkey941 5 лет назад

    How do you remove the stock bushings to add poly bushings?

    • @chaparralmotorsports
      @chaparralmotorsports  5 лет назад

      You've got to press the OEM rubber bushings out... before you can install the polyurethane bushings.

  • @termccabe8527
    @termccabe8527 2 года назад

    What is the right length for the extended cables?

    • @chaparralmotorsports
      @chaparralmotorsports  2 года назад

      Hello, when going with the Yamaha cables, they don't list length, they just call them extended length cables for their tall handlebars.

  • @kdelivers2295
    @kdelivers2295 22 дня назад

    Is it the same process for yamaha scr950?

  • @GGGmAn001
    @GGGmAn001 4 года назад

    These tall handlebars won't fit on the ABS model, correct? Or is there a workaround?

    • @chaparralmotorsports
      @chaparralmotorsports  4 года назад

      Why wouldn't they?

    • @2142Comander
      @2142Comander 3 года назад

      @@chaparralmotorsports hi I wanted to ask the same question. They don't wit with the abs model, cause the break lines don't fit with the abs control. Maybe I am wrong, but I couldn't find the right extansion that's abs conform. Would love to get some help. I realy need an ape hanger on my bolt

  • @handymanservice83
    @handymanservice83 3 года назад

    How much is the cost to install the bars very interested

    • @chaparralmotorsports
      @chaparralmotorsports  3 года назад

      Hello, please contact our Service Department for install/labor rates. (909) 889-2761. Thank you

  • @taylorboe6747
    @taylorboe6747 3 года назад

    Where can i find these bars? They're out of stock on your site :(

  • @iamjorgeg7803
    @iamjorgeg7803 6 лет назад +1

    Where can I order those steel washers?

    • @chaparralmotorsports
      @chaparralmotorsports  6 лет назад

      Give our customer care team a call. They should be able to track them down for you.

  • @baching2981
    @baching2981 3 года назад

    Where is the link for the Handle Bar?

    • @chaparralmotorsports
      @chaparralmotorsports  3 года назад

      Hello, here is the link for the tall handlebars. www.chapmoto.com/yamaha-tall-handlebars.html

  • @salahudinuvaise8269
    @salahudinuvaise8269 5 лет назад

    Need Help..
    Is it possible to change handlebar for Bolt c spec

    • @chaparralmotorsports
      @chaparralmotorsports  5 лет назад

      Thank you for your inquiry. Yes, all of the Bolt bars swap from one model to the next without issues. -- Kyle & the Chap Moto Team

    • @salahudinuvaise8269
      @salahudinuvaise8269 5 лет назад

      @@chaparralmotorsports thank you very much for the reply.. if u hav any videos or pics on changing bars for bolt c spec ... thanks

  • @cake3orde4th32
    @cake3orde4th32 4 года назад

    how the heck do you get the dang engine cutoff plug off of the holster it's on. I can't for the life of me get it off.

    • @chaparralmotorsports
      @chaparralmotorsports  4 года назад

      Hi, can you please tell us at what point in the video (time mark) you are referring to? Thank you

    • @cake3orde4th32
      @cake3orde4th32 4 года назад

      @@chaparralmotorsports I ended up getting it off. It was the part at around the 12:20 mark. The connector on the right had a tab on the top that was hidden really well that I needed to suppress to get the plug off of the frame. Needed to use a flat head.

  • @edwarddeleon2220
    @edwarddeleon2220 Год назад

    Do you know if they still sell them ?

    • @chaparralmotorsports
      @chaparralmotorsports  Год назад

      Not sure, you may have to search around for them. We no longer have them.

  • @werdup06
    @werdup06 4 года назад

    What is the torque setting for the riser nut?

  • @SatantonioRaider
    @SatantonioRaider 4 года назад

    Do you have a link for the Star Bolt extended cables?? Do you sell them on Chapparal.com?

    • @chaparralmotorsports
      @chaparralmotorsports  4 года назад +1

      Hello, yes we sell them. Here's the links:
      www.chapmoto.com/yamaha-extended-clutch-cable-1tp-f63a0-t0-00
      www.chapmoto.com/yamaha-extended-throttle-cable-1tp-f63b0-t0-00
      www.chapmoto.com/yamaha-extended-front-brake-line-1tp-f58e0-t0-00

    • @Luisfury10
      @Luisfury10 Год назад

      Do you have link to parts needed for the handlebar swap?

  • @scat4me
    @scat4me 4 года назад

    How did you lengthen the wiring?

    • @chaparralmotorsports
      @chaparralmotorsports  4 года назад

      Hi, we didn't need to. It fit with the stock wiring. Longer cables were required though.

    • @scat4me
      @scat4me 4 года назад

      @@chaparralmotorsports How do I get longer cables for a 2017 Yamaha FZ07 ?

  • @michael102
    @michael102 6 лет назад

    More lights please!

  • @longbeachfinest1105
    @longbeachfinest1105 9 лет назад

    so i need all of these right ???? or do i just need 1 and 3 ? for a 2015 bolt bc the first one has 3 cables and the 2 one has just one and the 3 just one
    1 Extended Length Braided Stainless Steel Control Cables 1TP-F63B0-T0-00$98.95 Options: Throttle Cable|Fits: 2015 BOLT
    2 Extended Length Braided Stainless Steel Control Cables 1TP-F63A0-T0-00$72.95 Options: Clutch Cable|Fits: 2015 BOLT
    3 Extended Length Braided Stainless Steel Brake Line 1TP-F58E0-T0-00$88.95 Fits: 2015 BOLT

    • @longbeachfinest1105
      @longbeachfinest1105 9 лет назад

      +Paul Morgan www.shopyamaha.com/product/details/tall-handlebars?b=Star+Motorcycle&d=12|12&f=2015|40&dealernumber=&wi=true

    • @chaparralmotorsports
      @chaparralmotorsports  9 лет назад

      +Paul Morgan Hi Paul you need all three.
      #1 is the extended clutch line.
      #2 is the extended throttle cables (this comes with two cables: the pull and the return cable).
      #3 is the extended front brake line.
      Hope that clears it up.

    • @HooDRidEWhiteY
      @HooDRidEWhiteY 5 лет назад

      Goddamn so were looking at 400 bucks to get these bars on the bike?

  • @johnkillmore1624
    @johnkillmore1624 Год назад

    QWE

  • @RobertR5
    @RobertR5 10 лет назад

    I'm ready to win august prizes. I can use that gift card. I'm favorite place on earth..

  • @leslieshort433
    @leslieshort433 3 года назад

    Hey guys, I would like to find out what parts you used on this bolt , my son has a 2019 and I can’t find anything . Wire extensions , cables nothing. To make it worse I’m in Alaska and we can’t just go down the road and have some made . Can you help

    • @chaparralmotorsports
      @chaparralmotorsports  3 года назад

      Hello Leslie,
      Just below the name of our RUclips Channel are all the links for the products we used. If you still need help, give our customer service department a call (800) 841-2960. Thank