You are the man!!! My kick starter parts have been in a bag in the garage for years! Couldn't figure out how to put them back. You showed me the way! Thanks so much!!!!!
BONGIORNO! Thank You so Much Viberello. This is Kenny from Brooklyn. I appreciate the help, let me know if you need anything from New York. The only suggestion I have is to clean everything and put a little bit of grease on shafts. (Very little)
Excellent video man! Perfect speed for learning. I feel very confident after watching this video. I thought I was going to have to get rid of my scooter
Man you really have the absolute best videos and the most useful tips. I hope you never stop making such fantastic videos. Because you have helped me out SO MUCH with your videos, I want to pay it forward. I want to send you a small gift. It is definitely nothing fancy at all but it is my way of saying, THANK YOU. Where can I send it to?
How about 2002 ET4 .I have not get start yet. Would you should me how to get connect the vacummline and what kind of gasoline to use or not to use for this scooter?
Ur spindle gear only moves for a sec wen u turn it n stay still. mines keep spinning to long n be popping out a place wen it's suppose to connect with my gear on the left why is that?
What to do if it won’t kick down like it’s stuck just click click and clicking…my gy6 150cc have great compression just the damn kickstart won’t work how to fix it …
f your kickstart won't work and you're hearing clicking, it's likely a problem with the kickstart mechanism or gear. To fix it, try these steps: Check for any visible damage or wear on the kickstart mechanism and gear. Lubricate the mechanism and gear with high-quality grease. Ensure the kickstart lever and gear are properly aligned. Check for any binding or looseness in the kickstart shaft. Replace any damaged or worn parts. Thank you for watching my video
Hello I do not put any grease because if just a touch of grease goes on your belt you going to have a big problem . Thank you for watching my video and Happy Holidays
Thanks. I was curious because my kickstart lever was so stuck, I forced it by hard kicking it & the lever stripped. Now it’s hanging. Going to replace the lever and the gear once I open it up tomorrow
for those of us less skilled, Id suggest using a needle nose pliers in placing the spring. theres not alot of room to work with, and a needle nose, makes it just a bit roomier.
If I take those 2 gears out, will the scooter still start and run without them if I only want electric start? I want to keep the kick start off for new variator cover.
I already paid $100 for mine to get repaired. Ive ridden it for 4 weeks and the bushing behind has failed which has lead to a fucked kick starter again. I've spent hours trying to put the spring on and haven't been able to do it. I think its because I havent pulled the gold/green spring cover off mine. The reason I havent done that is because i dont think I can get the nut for the clutch cyclinder off. All i have is battery impact driver and a breaker bar but trying to take the nut off spins the cylinder.
![GY6 ENGINE BUILD [Everything you need to know]](/img/1.gif)
You are the man!!! My kick starter parts have been in a bag in the garage for years! Couldn't figure out how to put them back. You showed me the way! Thanks so much!!!!!
Hello Leroy I'm happy I was able to help you thank you for watching my video
BONGIORNO! Thank You so Much Viberello. This is Kenny from Brooklyn. I appreciate the help, let me know if you need anything from New York. The only suggestion I have is to clean everything and put a little bit of grease on shafts. (Very little)
Ciao Kenny great idea for a very little grease thank you for watching my video and be safe
Excellent video man! Perfect speed for learning. I feel very confident after watching this video. I thought I was going to have to get rid of my scooter
Hello Mr Dank thank you for watching my video
Man you really have the absolute best videos and the most useful tips. I hope you never stop making such fantastic videos.
Because you have helped me out SO MUCH with your videos, I want to pay it forward. I want to send you a small gift. It is definitely nothing fancy at all but it is my way of saying, THANK YOU. Where can I send it to?
Hello my friend thank you for watching my video
virberello GY6 Tips and Tricks
What is your email?
Thank you so much! it really helped me, i bought a too very cheap GY6 scooter and i managed to repair the kick
Hello Wilson thank you for watching my video and be safe
You are the man I love your videos keep up the good work you got my vote Steve from Annapolis
Hello Steve thank you for watching my videos
How about 2002 ET4 .I have not get start yet. Would you should me how to get connect the vacummline and what kind of gasoline to use or not to use for this scooter?
My kick start is really hard to use. Is there someway to keep it lubricated without pulling all apart. I'm asking because right hip & leg is bad.
Hello John the best way is to open and place some grease but not to much because the belt is close to the kick start
Tks from Brazil, Brow
You're welcome
Hello
I have a problem
The kickstart shaft is coming off with the case
Any suggestions on how to take it off?
Hello Gareth Ryan sometime that can happen when you remove kickstart harm spray a little wd40 silicone around the shaft sometime that help
Thanks
My redfox 1p61QMK 200 cc kick starter broke after 3uses.where can I get quality replacement?
Hello the best is contact (727) 347-1661 parts for scooter in Florida
Ur spindle gear only moves for a sec wen u turn it n stay still. mines keep spinning to long n be popping out a place wen it's suppose to connect with my gear on the left why is that?
Nice video sir . Very detailed and informative sir . Shout out from the Philippines 😁❤️
Thanks for watching!
You are always usefull and helpfull you are the man!
Hello my friend thank you for watching my video
Can i ask you about a kicks on a question
Does the 150cc kit work for the 125cc
What to do if it won’t kick down like it’s stuck just click click and clicking…my gy6 150cc have great compression just the damn kickstart won’t work how to fix it …
f your kickstart won't work and you're hearing clicking, it's likely a problem with the kickstart mechanism or gear. To fix it, try these steps:
Check for any visible damage or wear on the kickstart mechanism and gear.
Lubricate the mechanism and gear with high-quality grease.
Ensure the kickstart lever and gear are properly aligned.
Check for any binding or looseness in the kickstart shaft.
Replace any damaged or worn parts.
Thank you for watching my video
Guys what size shaft do I use for my 150cc gy6 Chinese scooter on a 2020 ice bear challenger series first small body 150cc
Would a bad kick starter keep the bike from starting? Tried using my and it seems like it slips- haven't taken it apart yet.
If you have a gy6 scooter the kick starter is good for nothing totally a bad design and yes that can keep the bike from not starting
Do you grease up the gears to prevent them from locking up?
Hello I do not put any grease because if just a touch of grease goes on your belt you going to have a big problem . Thank you for watching my video and Happy Holidays
Thanks. I was curious because my kickstart lever was so stuck, I forced it by hard kicking it & the lever stripped. Now it’s hanging. Going to replace the lever and the gear once I open it up tomorrow
This video helps me a lot .Good Job
Thank you for watching my video
Thank you very much sir
Eres excelente
Hello my friend thank you for watching my video
I'm ask a dumb?! Can I use a hand tool to unscrew I don't own no power drain at the time
Hello yes you can use a hand tool but will take you few minute longer to do the job. Thank you for watching my video
I need a kick asambli for my scotty.
Please reply me
Hello my friend I buy all my parts on Amazon check the links under the video
Can you please inform me that parts match with other brands. Like Honda or yamaha?
Hello this is a gy6 motor part only
thank you so much
Hello my friend you are very welcome and thank you for watching my video
Where can I buy Moore parts from
Hello my friend I buy all my part on AMZ amzn.to/3wA78cW
for those of us less skilled, Id suggest using a needle nose pliers in placing the spring. theres not alot of room to work with, and a needle nose, makes it just a bit roomier.
Even better use Locking type of needle nose pliers!
Thank You Man, Shalom.
Thank you for watching my video
If I take those 2 gears out, will the scooter still start and run without them if I only want electric start? I want to keep the kick start off for new variator cover.
hell, you don't even need a starter, just run that fucker down a ways and pop it into gear, if its a geared bike.
I already paid $100 for mine to get repaired. Ive ridden it for 4 weeks and the bushing behind has failed which has lead to a fucked kick starter again.
I've spent hours trying to put the spring on and haven't been able to do it. I think its because I havent pulled the gold/green spring cover off mine. The reason I havent done that is because i dont think I can get the nut for the clutch cyclinder off. All i have is battery impact driver and a breaker bar but trying to take the nut off spins the cylinder.
hi >>> thank u for ur videos ...... can i add kick start set to my scooter witch is work with e start only
Hello not sure if they make a kit for your scooter we need to search on line
@@VirberelloScooterTips Thank you .. my scooter is Benelli {cafe nero classic}
okay
Thanks for the video everone very nice and great info, keep up the great work everyone
☆☆☆☆☆☆☆☆☆☆☆☆
Hello my friend thank you for watching my video
✌✌✌🔔🔔🔔🏁🏁💨💨I'll try