I have soft close on my Bimmer and my drive side not soft closing sometimes. Thanks for the tutorial but this alot of work lol. I need to find you before taking it to the dealership.
I just bought a 2008 750li and I too have this issue in the same side door. Soft close doesn't engage at all. I can hear it trying to catch but it never does. All the others work fine. I was gonna settle and leave it as is but thanks to you , I'm gonna be repairing this myself . Easy fix
Same happened to me.O think there's a broken piece inside the latch unit he's working on,I didn't that,just put a new motor unit in mine,hoping it would work ok,the motor activates,bit doesn't latch door,the know inside doesn't lock it dromvoutside.So will get a new latch unit and replace.Akso this was draining my battery,keeping the system awake always,due to the old motor being burnt out.
@mikes8207 I guess there is videos on taking out the two plastic cams inside the latch unit,they impair the latch locking,moving back and forth.The latch h itself is ok they said and a software update is supposed to be programmed to the cars ecu computer.I don't Ishta software to do that,but it's regarding deactivating the electric locking automatically. At least my door stays shut by slamming it,that's could ask for,when driving its not swinging open,and parking it keeps door secure.Ill delv into it more when time permits.
@JeffGarnaas ohh wow i had no idea...my door must need to be programmed to lock then....i will def be calling a shop Monday......let me know how you make out
@mikes8207 its all under a NHSTA recall in United states,bmw agreed to repair all door latches,free of charge,just schedule an awith ypur nearest bmw dealer,tell the receptionist it's under a federal open recall,g8ve your VIN number to the dealer,and set a time to bring it in.They.may keep it overnight,sl9ths can be sloths.But it is a.lot of work,remoeach.inner door double panel,removing theblatch units,rem9ve plastic cams from each latch and put it all back toge,and test door motors,to see I'd They work.Nothing should be charged to you at all,don't let them.And no extra service work! Don't fall for that.And make sure they reprogram the ecu computer,with the software update-now your golden free of charge!
Good stuff man, I like your videos. I have a solution for the door strut or door break bushing, will post it sometime. Strange how those bushings completely disintegrate into dust.
Hello, I have a similar issue but not the same, my softclose works every time, but I have to press a door lightly, like it needs just one mm more closed in order to activate the motor... Do you have any idea how it could be adjusted? Thanks!
You could adjust the door catch (on the frame, sometimes referred to as a striker) if you loosen it and push it out closer to the door it will compensate for the extra 1mm needed to close. Good luck!
The door can get misaligned and weight of it hanging causes sensor misalignment. The catch hoop mounted to car Fram on car body can become misaligned, that's 4 marks to show proper alignment, and just 2 torn screws to adjust it.The door itself can be adjusted by the hinges,to raise up and and align,you'll need a helper to lift it,while the bolts are loosened and tightend,and the door cam positions cylinder must be disengaged to get at door hinges,good luck
its easy to put back. Just put handle in place and pull on the thin metal plate. I do have videos on this. ruclips.net/user/results?search_query=e65+door+handle
One of if not the best video I've ever see. Thank you! Please keep up the amazing work!
This sir is one of the best diys I've ever seen
I've seen this video at least 15 times 🤣 love your accent man, just had 4 beers and will try to get it sorted 😅
Oh well, on E60 is riveted and not possible to disassemble the lock 😢
I have soft close on my Bimmer and my drive side not soft closing sometimes. Thanks for the tutorial but this alot of work lol. I need to find you before taking it to the dealership.
I just bought a 2008 750li and I too have this issue in the same side door. Soft close doesn't engage at all. I can hear it trying to catch but it never does. All the others work fine. I was gonna settle and leave it as is but thanks to you , I'm gonna be repairing this myself . Easy fix
Did you fix it?
@@gtarules1 I doubt it. This is clearly NOT the man in the videos' first rodeo. This would be disastrous for the average person. Lol.
I just fixed mine following your DIY (changed earlier on the other side, checked now, was the same error lol). Thanks for the video!
It would be amazing if someone made a 3d print file to replace the little plastic lever that you glued
Thank you for the video, I understand now how not to think about fixing it... At all
funny, good one
Thank you very much, i repair my softclose. 👍
So i did this and it worked. But my door wont lock for some reason. The knob goes down but you can still open from outside ? Any ideas ??
Same happened to me.O think there's a broken piece inside the latch unit he's working on,I didn't that,just put a new motor unit in mine,hoping it would work ok,the motor activates,bit doesn't latch door,the know inside doesn't lock it dromvoutside.So will get a new latch unit and replace.Akso this was draining my battery,keeping the system awake always,due to the old motor being burnt out.
@@JeffGarnaas let me know how you make out with the new latch....and thanks for the reply
@mikes8207 I guess there is videos on taking out the two plastic cams inside the latch unit,they impair the latch locking,moving back and forth.The latch h itself is ok they said and a software update is supposed to be programmed to the cars ecu computer.I don't Ishta software to do that,but it's regarding deactivating the electric locking automatically. At least my door stays shut by slamming it,that's could ask for,when driving its not swinging open,and parking it keeps door secure.Ill delv into it more when time permits.
@JeffGarnaas ohh wow i had no idea...my door must need to be programmed to lock then....i will def be calling a shop Monday......let me know how you make out
@mikes8207 its all under a NHSTA recall in United states,bmw agreed to repair all door latches,free of charge,just schedule an awith ypur nearest bmw dealer,tell the receptionist it's under a federal open recall,g8ve your VIN number to the dealer,and set a time to bring it in.They.may keep it overnight,sl9ths can be sloths.But it is a.lot of work,remoeach.inner door double panel,removing theblatch units,rem9ve plastic cams from each latch and put it all back toge,and test door motors,to see I'd They work.Nothing should be charged to you at all,don't let them.And no extra service work! Don't fall for that.And make sure they reprogram the ecu computer,with the software update-now your golden free of charge!
Dziekuje ci bardzo za szczegółowy filmik. Bardzo mi pomógł. Naprawiłem u siebie. Dziękuję
Good stuff man, I like your videos. I have a solution for the door strut or door break bushing, will post it sometime. Strange how those bushings completely disintegrate into dust.
Hello, I have a similar issue but not the same, my softclose works every time, but I have to press a door lightly, like it needs just one mm more closed in order to activate the motor... Do you have any idea how it could be adjusted? Thanks!
You could adjust the door catch (on the frame, sometimes referred to as a striker) if you loosen it and push it out closer to the door it will compensate for the extra 1mm needed to close. Good luck!
@@pulkitpaul8029 yeah that's the first thing that came to mind and it works, but the door sticks out then 😅
The door can get misaligned and weight of it hanging causes sensor misalignment. The catch hoop mounted to car Fram on car body can become misaligned, that's 4 marks to show proper alignment, and just 2 torn screws to adjust it.The door itself can be adjusted by the hinges,to raise up and and align,you'll need a helper to lift it,while the bolts are loosened and tightend,and the door cam positions cylinder must be disengaged to get at door hinges,good luck
I just encountered the same problem with the right rear door on my 365. Can I bring my vehicle to you.
Needed to see this cause I want to retrofit this on to E60
Very good.!!!!
Excellent. Very detailed. Thank you.
Did you disconnect the battery? You don't seem concerned about the Air bag.
i dont disconnect battery. but its best practice if you are working near airbags. thanks
Great job! Where you located please?
South Africa
Great vid!
how did you re-install the handle? you did not show it, it was very difficult to take out at the beginning.
its easy to put back. Just put handle in place and pull on the thin metal plate. I do have videos on this.
ruclips.net/user/results?search_query=e65+door+handle
Just did one today,don't need to remove outer door handle,you can just move the inside lock downward to take it out ,that pin can move 45° down.
Bro u sound like Arnold Schwarzenegger
I'll be back