04 Tacoma Prerunner 2.7 L Rattling noise?

Поделиться
HTML-код
  • Опубликовано: 4 янв 2025

Комментарии • 26

  • @jessejames1395
    @jessejames1395 10 лет назад +1

    The noise is coming from your balance shafts the 2.7 has two vibration dampening shafts almost look like a cams that rotate opposite of your motor rotating mass I personally just had this happen to a new motor with less then 3000 miles on it. Sounded the exact same

  • @jackal5096
    @jackal5096 8 лет назад

    My 2001 2.7l did the same. Found it was the harmonic balancer. Check the alternator drive belt for fraying. Also, use a screwdriver or small pry bar to try to wiggle the pulley along its hub.

  • @Colescoffin_13
    @Colescoffin_13 12 лет назад +1

    its the fucking heat shield covering the exhaust manifold. Either a nut or 2 came loose or the heat warped it

  • @mainorrabanales123
    @mainorrabanales123 11 лет назад +1

    I thinks its the harmic balancer its the main pully in engine

  • @jonny7570
    @jonny7570 11 лет назад +1

    Did you find out what it was?
    My T!00 2.7 does the exact same thing.

  • @1995dresser
    @1995dresser 8 лет назад +1

    I have the same noise on my 05 Tacoma only when its a cold morning start only for about 2-3 minutes at the most then goes away . I think its the Piston skirts only because I had a 1992 Toyota pickup with the 2.4 that I bought brand new and it sounded like a diesel sometimes in the morning on cold start up the dealer Mechanic told me that its the piston skirts . they are made that way to prevent scuffing so when the engine heats up . they don't expand so much that they wear. I guess he was right because my son still has that truck and its still running to this day with many miles on it and sounds and runs just fine . so it Could Not be a Rod or Wrist pin Knock because they never go away cold or hot

  • @kim414may
    @kim414may  10 лет назад

    No. The truck only does it during the cold cold winter months. I guess in Socal that may be just 1 month. It still does it...can't find the source.

  • @zazuex
    @zazuex 11 лет назад

    My 2001 has been doing that since 40K or so. I have 198K now and it hasn't gotten any worse. I just won't drive it until it warms up. I have a remote start, so I'm not too bothered by it. However, I also have a curious mind and would like to know what the heck it is also.

  • @ahmediraq3498
    @ahmediraq3498 11 лет назад +2

    i have same sound after fax new hade gasket i find this noes in the( hydraulic lash adjuster ) its stranded not moving normal because i wash it with gasoline. then i open and cleane it after that i have smooth engine normal sound
    my regards to every body.....Ahmed....Iraq

  • @countrycamkos
    @countrycamkos 12 лет назад

    does the noise match the timing of the engine's rpm? If so it could be a lifter.

  • @androsborsato
    @androsborsato 11 лет назад

    goes away when warmed? does it match the rpm of the engine, if so give it an engine flush ass you probably have a sticky lifter. just change the oil back to back.

    • @JoshBirge
      @JoshBirge 10 месяцев назад

      I have this problem

  • @kim414may
    @kim414may  12 лет назад

    does noise with the heat shield go away when warmed?

  • @chenchomaracatu
    @chenchomaracatu 10 лет назад

    Any solution to your engine problem??

  • @mainorrabanales123
    @mainorrabanales123 11 лет назад

    I mean harmonic balancer

  • @jessejames1395
    @jessejames1395 10 лет назад

    Lc engineering sales an elimination kit which is right around 100$ and will solve your problem with that noise

  • @robertmillis7313
    @robertmillis7313 7 лет назад

    Any word on the fix?

  • @eacmontana
    @eacmontana 11 лет назад

    2004 tacoma 2.7 4x4 does exactly the same thing, but goes away soon after warming.

    • @jonny7570
      @jonny7570 11 лет назад +2

      My T100 2.7 is doing the same thing as well. I was told by two mechanics it's ether the timing chain tensioner or guides. Took off my exhaust manifold heat shield, no change.

    • @jonny7570
      @jonny7570 11 лет назад +2

      Jon M.
      Update: Changed the upper chain tensioner, no change. There is another one on the small chain, but can't get to it without taking the whole front engine apart.
      Guides looked a little worn, but again would have to take the front engine apart.

    • @stumbee6712
      @stumbee6712 2 месяца назад

      Were you able to find the problem??? ​@@jonny7570

    • @stumbee6712
      @stumbee6712 2 месяца назад

      ​@jonny7570 mine is doing the same thing but goes away when warmed up

    • @eliasjr.5213
      @eliasjr.5213 2 месяца назад

      @@stumbee6712did you find out the problem?

  • @tonywilliams7260
    @tonywilliams7260 10 лет назад

    I think they know there probalem

  • @stumbee6712
    @stumbee6712 2 месяца назад

    Any word on the fix?