One detail that i would add is efficiency. Do i care if my battery lasts operational for the entire day or i have backups? Great video btw, a lot of begginers approach their builds with no planning in mind and end up with some hilarious and self destructing builds lol
How about a vid on pme looking at only spring strength. Example = say a m100 full stroke can reach 20 RPS. -m110? -m120? Then say a m100 short stroke 4 teeth could reach 25 RPS -m110? -m120? Ect (I’m not sure on the exact numbers)
That's a good idea, but it's really complicated. There are many factors involved with finding the PME limit. Unfortunately not something i could go into depth with in this video, but it could be done in the future for sure.
Great detail, I wanted a mix play.. I purchased a 33K motor (T238 Brushed), 11.1v, 13:1 gears. It was showing heavy amp draw.. I still have these components as I will add these to another rifle. Will these give me a good 25-30rps?
I can't comment for sure, but that sounds like a fast setup. You should check out other peoples reports of the T238 33K effective speed and correlate that with 13:1 gears.
@ that would make sense on the amp draw. Interestingly I used both an M100 and M120 and the amp draw was still high. Is it possible to just install a new motor without shimming a stock gearbox?
The first part you should buy is a Polarstar F2, then the Maxx / silent industries Alpha hop, then a PDI barrel, then the CGS. And you have just built yourself a laser gun without effort.
@@PerfectAirsoft id get a Kythera if I dont have much budget. A simple Kythera is already better than the greatest gear box build for semi auto. A Jack if you want auto. Why waste time on gears shimming and aoe corrections when you can actually get a mouseclick level responsive trigger in 5-10 minutes.
Scorpion evo: mine didnt need works from ~2016 to 2024: 11.1v 1.2J max and 27rps on stock motor (short stroked and asg ultimate gears and piston/p-head) Love that thing! Thanks for the video. What would work best on stock 16:1 gears gate aster specna arms ak-105? It’s already really good and accurate on 11.1v 1J I have an extra g&g ifrit Icam going to take out my EBB Bolt AKM, it’s too fast for my ebb AKM (locks up, rpm to o fast)
PME is complex. That EVO setup there would work just fine yes. Difficult to say at a glance about your AK, but swing by our discord server: discord.gg/Pj8adPVnuH There's a handful of people there with tech knowledge.
One detail that i would add is efficiency.
Do i care if my battery lasts operational for the entire day or i have backups?
Great video btw, a lot of begginers approach their builds with no planning in mind and end up with some hilarious and self destructing builds lol
Yeah i had my fair share of mistakes many years ago, i hope to make it easy for others lol
Such a difficult topic but very good explained buddy - great 👌👊
Much appreciated
How about a vid on pme looking at only spring strength. Example = say a m100 full stroke can reach 20 RPS.
-m110?
-m120?
Then say a m100 short stroke 4 teeth could reach 25 RPS
-m110?
-m120?
Ect
(I’m not sure on the exact numbers)
That's a good idea, but it's really complicated. There are many factors involved with finding the PME limit. Unfortunately not something i could go into depth with in this video, but it could be done in the future for sure.
You want a recipe to replicate, right? 😂
@@BeWolf. no I have my own recipes. Just this this guy could get the information out with more of a Science feel
@@BeWolf. Haha yeah...but there is never a surefire recipe of selecting parts. Too many variables on a per gun basis.
This. I can't find ANY video or articles about exactly this.
Great detail, I wanted a mix play.. I purchased a 33K motor (T238 Brushed), 11.1v, 13:1 gears. It was showing heavy amp draw.. I still have these components as I will add these to another rifle. Will these give me a good 25-30rps?
I can't comment for sure, but that sounds like a fast setup. You should check out other peoples reports of the T238 33K effective speed and correlate that with 13:1 gears.
@ that would make sense on the amp draw. Interestingly I used both an M100 and M120 and the amp draw was still high. Is it possible to just install a new motor without shimming a stock gearbox?
Perfect ! 😎👌
Thanks ✌️
The first part you should buy is a Polarstar F2, then the Maxx / silent industries Alpha hop, then a PDI barrel, then the CGS.
And you have just built yourself a laser gun without effort.
That's hardly fair lol
@@PerfectAirsoft HPA upgrade = once and for all
@@PerfectAirsoft id get a Kythera if I dont have much budget.
A simple Kythera is already better than the greatest gear box build for semi auto.
A Jack if you want auto.
Why waste time on gears shimming and aoe corrections when you can actually get a mouseclick level responsive trigger in 5-10 minutes.
@@jasonlai980142 I'd rather piss blood than have an HPA hose
@@jasonlai980142 Endurance milsim. No tether.
Scorpion evo: mine didnt need works from ~2016 to 2024: 11.1v 1.2J max and 27rps on stock motor (short stroked and asg ultimate gears and piston/p-head)
Love that thing! Thanks for the video.
What would work best on stock 16:1 gears gate aster specna arms ak-105? It’s already really good and accurate on 11.1v 1J
I have an extra g&g ifrit Icam going to take out my EBB Bolt AKM, it’s too fast for my ebb AKM (locks up, rpm to o fast)
PME is complex. That EVO setup there would work just fine yes. Difficult to say at a glance about your AK, but swing by our discord server: discord.gg/Pj8adPVnuH There's a handful of people there with tech knowledge.
First
buy this