How to Remove Bumper 00-07 Volvo V70
HTML-код
- Опубликовано: 10 сен 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/9/h/s...
Shop now -
Items you will need:
Ratchet and extensions
Assorted Sockets
Body Tool
Needle nose pliers
Locking Pliers
Push Pins if necessary
In the video, 1A Auto shows how to replace the bumper. The video is applicable to the 00, 01, 02, 03, 04, 05, 06, 07 Volvo V70
This process should be similar on the following vehicles:
2001 Volvo V70
2002 Volvo V70
2003 Volvo V70
2004 Volvo V70
2005 Volvo V70
2006 Volvo V70
2007 Volvo V70
🔧 List of tools used:
• 8mm Socket 1aau.to/oxH/1AX...
• Trim Tool Set 1aau.to/ojA/1AX...
• T20 Driver 1aau.to/ofY/1AX...
• Ratchet 1aau.to/oEC/1AX...
• Socket Extensions 1aau.to/oBX/1AX...
• Gloves 1aau.to/odX/1AX...
Subscribe: / @1aauto
Check out our playlist:
Volvo V70 2001-2007 2nd Generation: • Volvo V70 2001-2007 2n...
For More Info visit us at 1aau.to/h/RU/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Top clip removal is wrong. Push the middle in an 8th of an inch and they easily slide right out
In case that those clips would be original It would be done as you say. But these seem to me like some "unipart" made out of one plastic piece.
Installation of the passenger side headlight wiper is incorrect, the wiper blade should be on the right 😊
The “sensor” is a fog light.
I think the wipers are put on wrong way round,
From watching this video, I would never have my car in this garage..
This was useful to get the bumper off and install an aftermarket ATF cooler, thanks
Cool -you make it look easy !
Sadly, now no reason not to tackle my blocked head light washer pump !
Thanks g
lmao! Like the rest of the comments pointed out. She totally put those wiper arms on the wrong way.
Th aks that gave me the encouragement I needed to do it!
I sure do appreciate your videos. Lots of help for us shade tree mechanics.
+stepitup Thanks for checking us out!
Really good instructions! Thanks! Do you have instructions on how to remove rear bumper?
What is the part number for the six clip on top of the grill?
Please check the operation of the headlight wipers after installation...
She can work at my garage 👍
I assume from this video that there are no rivets from the wheel well liner into the bumper cover.
Only the one T25 on each side connecting from the wheel well to the positioning bracket
Is thus the same for the 07 model can't be live I have to do all this to replace the washer pump lol
Those grey connectors down are for additional fog lights
Thanks for the feedback! +Juha Parkkonen
Which is a little odd since there are no fog lights on this car.
@@donmoore7785 additional fogs !! you can fit them after if you want them, wire is there ready to fit fogs
she put the wipers on the headlamps on wrong :s
Everything you do is done right thank you
+Kenny Watkins Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
The wipers are not re-installed the way they were
Headlight wipers are fitted back incorrectly.
That's the bumper cover not the bumper.
+Mr. Gunk Thanks for the feedback!