Great job thank you. Regarding the COM port issues: plug the cable into different USB ports, when it finishes installing the driver it will say what com port it is. Mine wasn’t being recognized I plugged into COM 7 and it showed up on the list. Ration still didn’t communicate but the reason was the connector wasn’t fully plugged into the radio, takes a bit of force to get it in all the way. First time plugging it in felt fine but needed to be pushed on all the way. Hope it helps. Again thank you so much for explaining how to set up and use this radio your information is invaluable.
Thanks for the great tutorial! It took me a few days to understand I need to push to cable into the radio until it clicks. Only then did Chirp recognize my radio. It would be great if you did a tutorial on how to use as a walkie talkie for those of us without a Ham license.
Nice work buddy, thanks. I'm awaiting delivery of my first HT set in a couple days, so I'm appreciating this preview of what I need to do to get up and running.
Installed Chirp under UBUNTU Linux. Radio was at /dev/ttyUSB0. Didn't work first time so ran Chirp with "sudo": > sudo /usr/bin/chirpw to have root access. Not sure that was necessary. Had to go through the motions two or three times power up power down unplug plugin... Then it worked! with my Baofeng UV-5R.
I just had to auger my through setting up "split" DCS tones on a repeater. Tone Mode = Cross, DTCS = 624, DTCSS RX = 116, DTCSS POL = NN, DTCSS Mode = DTCSS -> DTCSS. The club does this to keep the repeater private for dues paying members only.
I'll be going hunting with a bunch of guys in the next couple of weeks. It'll be in pretty dense bush. Can you give me an idea what settings you would choose to use to maximize range/distance of broadcast and reception? We have 2 moose tags, and have to be able to stay in touch with each other should we have an opportunity to bag a moose, don't want 1 set of guys shooting both and then another set of guys shooting another putting us over our limit. Not sure if we should be attempting to connect to a repeater, as it's a fairly remote location. Any help greatly appreciated. Love the video, very well presented, clear and concise.
Radio/Import menu is missing when I install the current release. With a Legacy version it is there. I get the same issue on a Win 10 and a Win 11 laptop. I've uninstalled, rebooted, and reinstalled several times and still don't have Radio/Import. Any help would be greatly appreciated.
Hola sabes como programar la radio baofeng uv-8D paque pasa que al apretar el ptt solo me suenan dos bip y no puedo comunicar al parecer esta bloqueada ... sabas como recuperar la radio o algun reset ... espero tu respuesta o alguen que me pueda ayudar gracias ...
Great video very easy to follow but I'm having a problem at the beginning with chirp recognizing my radio the only port option it gives me is COM3 when I hit ok it goes to cloning process then says error occurred radio did not respond cant get past that point volume on radio all the way up
You may not have a genuine programming cable. You will have to find the right driver for the cable online. There are many out there depending on the cable and op system used.
dude, these are great videos! very clear and in depth. def appreciate them. im having trouble getting my mirkit cable to work. says the ftdi chip is suppose to automatically download the driver but its def not and windows cant locate a suitable driver for it. wouldnt happen to have any advice on that would you? thanks again brother
Go to Miklor.com and search it using the term Driver. It should list all the drivers for all the different cables. From there you can install the right one manually.
@@Super-Predator you are the freakin man! ive spent 2 days talking to mirkit and doin all this craziness and 10 minutes after reading your comment im downloaded! now to continue on with the series!
I have a Baofeng GT-5TP. Chirp says to use UV-82HP. I've tried COM 1 and 3 (only options). When I attempt to clone, I get a warning that "An error has occured. The radio has not responded." Any suggestions? I'm stuck
I am in SC, but there is an annual Cola Warrior event near you in Kingman AZ. Do an internet search for Cola Warrior West. Signups are normally on AR15.com. We’d love to have you come and complete the course!
![BabyChiefDoit - Wonderful Time (Official Music Video) [Shot By @Rxllo]](http://i.ytimg.com/vi/_Bfqt3zV2KE/mqdefault.jpg)
Still one of the best videos for CHIRP in 2022.
This is perfect. Just what I've been looking for. Thank you.
Great job thank you. Regarding the COM port issues: plug the cable into different USB ports, when it finishes installing the driver it will say what com port it is. Mine wasn’t being recognized I plugged into COM 7 and it showed up on the list. Ration still didn’t communicate but the reason was the connector wasn’t fully plugged into the radio, takes a bit of force to get it in all the way. First time plugging it in felt fine but needed to be pushed on all the way. Hope it helps.
Again thank you so much for explaining how to set up and use this radio your information is invaluable.
Thanks for the great tutorial! It took me a few days to understand I need to push to cable into the radio until it clicks. Only then did Chirp recognize my radio.
It would be great if you did a tutorial on how to use as a walkie talkie for those of us without a Ham license.
I have watched so many videos on this and could never understand any of them until now. Well done!
I've got a UV-5RX3 on the way and watching your videos on repeat to help keep me from going crazy waiting, thanks so much!
very informative video. Thank You. I appreciate your tutorials.
Still a super useful series of uploads in 2021, honest.
These videos are super good
Again great video. I love the way you went over every option in the menu. Makes everything make sense! Thank you so much for your time!
You did a great job on this video. Thank you for your hard work!
Nice work buddy, thanks. I'm awaiting delivery of my first HT set in a couple days, so I'm appreciating this preview of what I need to do to get up and running.
Installed Chirp under UBUNTU Linux. Radio was at /dev/ttyUSB0. Didn't work first time so ran Chirp with "sudo":
> sudo /usr/bin/chirpw
to have root access. Not sure that was necessary. Had to go through the motions two or three times power up power down unplug plugin... Then it worked! with my Baofeng UV-5R.
I just had to auger my through setting up "split" DCS tones on a repeater. Tone Mode = Cross, DTCS = 624, DTCSS RX = 116, DTCSS POL = NN, DTCSS Mode = DTCSS -> DTCSS. The club does this to keep the repeater private for dues paying members only.
Excellent summary thank you
I’m trying to download from the radio Baofeng UV-82 and none of the listed COM ports are responding. Errors and access denied messages.
Great video, videos, however as I hook up my baofang to the computer everything shows up except for COM’s port.
I'll be going hunting with a bunch of guys in the next couple of weeks. It'll be in pretty dense bush. Can you give me an idea what settings you would choose to use to maximize range/distance of broadcast and reception? We have 2 moose tags, and have to be able to stay in touch with each other should we have an opportunity to bag a moose, don't want 1 set of guys shooting both and then another set of guys shooting another putting us over our limit. Not sure if we should be attempting to connect to a repeater, as it's a fairly remote location.
Any help greatly appreciated. Love the video, very well presented, clear and concise.
Thanks, Nice and Clear!
got one came in to day
Thank you for uv-82 help me prigraming
I have the UV-S9Plus. Which radio do I download? It is a 5V I think just a different model.
9:09 in that moment when I try to save its says an error has occurred, file access error
Radio/Import menu is missing when I install the current release. With a Legacy version it is there. I get the same issue on a Win 10 and a Win 11 laptop. I've uninstalled, rebooted, and reinstalled several times and still don't have Radio/Import. Any help would be greatly appreciated.
Hola sabes como programar la radio baofeng uv-8D paque pasa que al apretar el ptt solo me suenan dos bip y no puedo comunicar al parecer esta bloqueada ... sabas como recuperar la radio o algun reset ... espero tu respuesta o alguen que me pueda ayudar gracias ...
Boa tarde.
O menu settings do meu UV-5R está vazio. Não aparece nada. Pode me ajudar por favor?
Downloaded chirp. Cant get Baofeng 5R to clone. How do I get help with this?
Great video very easy to follow but I'm having a problem at the beginning with chirp recognizing my radio the only port option it gives me is COM3 when I hit ok it goes to cloning process then says error occurred radio did not respond cant get past that point volume on radio all the way up
You may not have a genuine programming cable. You will have to find the right driver for the cable online. There are many out there depending on the cable and op system used.
@@Super-Predator
It's the Baofang cable that came with the radio is there a better one ?
@@buildingalaskahomesteadstill could be counterfeit. Btech amazon store has genuine. But you can also just find drivers for the one you have
@@Super-Predator thanks I will get a new cable from them
dude, these are great videos! very clear and in depth. def appreciate them. im having trouble getting my mirkit cable to work. says the ftdi chip is suppose to automatically download the driver but its def not and windows cant locate a suitable driver for it. wouldnt happen to have any advice on that would you? thanks again brother
Go to Miklor.com and search it using the term Driver. It should list all the drivers for all the different cables. From there you can install the right one manually.
@@Super-Predator you are the freakin man! ive spent 2 days talking to mirkit and doin all this craziness and 10 minutes after reading your comment im downloaded! now to continue on with the series!
How do I find out what to program tone mode/ tone squelch/ Dtcs pol where do I get the info for a frequency ?
how do I find port?
Is there gonna be a test at the end of the video, and if so, go ahead and mark me down for a "D-" or an "F" and save us both the hassle...!! LOL
I have a Baofeng GT-5TP. Chirp says to use UV-82HP. I've tried COM 1 and 3 (only options). When I attempt to clone, I get a warning that "An error has occured. The radio has not responded." Any suggestions? I'm stuck
Make sure the volume is turned all the way up when you attempt to clone.
Your driver might be out of date. In device manager under Ports you should see Prolific USB-to-Serial Com Port. Mine shows as COM4.
What state are you located in? I’d love to do those Coca Cola warrior shoots. I live in the Peoples Republic of California.
I am in SC, but there is an annual Cola Warrior event near you in Kingman AZ. Do an internet search for Cola Warrior West. Signups are normally on AR15.com. We’d love to have you come and complete the course!
@@Super-Predator are you former military?
@@EricQuinn Nope, I’m just a regular guy
This was tough to follow.
yeah all these guys are vague to noobs like myself i like the barney style
Amazon has a book for sale on how to use chirp.
To fast for me