Van Tour 2022
HTML-код
- Опубликовано: 6 сен 2024
- 🔴 VISIT THE SHOP:
⭕️ ABRASIVES ➔ tinyurl.com/2p...
⭕️ ANGLE GUIDES & PARTS ➔ tinyurl.com/2p...
⭕️ MERCH ➔ tinyurl.com/mr...
🔴 CONNECT:
⭕️ FACEBOOK ➔ tinyurl.com/2p...
⭕️ TIKTOK ➔ tinyurl.com/yc...
⭕️ INSTAGRAM ➔ tinyurl.com/2p...
🔴 JOIN THE COMMUNITY:
⭕️ RUclips SUBSCRIBE ➔ tinyurl.com/26...
⭕️ NEWSLETTER SUBSCRIBE ➔ tinyurl.com/2p...
🔴 FOR BUSINESS INQUIRIES:
⭕️ reach out to ➔ currycustomcutlery@gmail.com
#sharpener #sharpening #knifesharpening #beltsharpening #mobilesharpening #harborfreight
For those asking the 1x30 Machine I use for stropping can be found here or on Amazon:
www.aliexpress.us/item/3256803352240129.html?
Wooh 165$ to ship. Ouch!
I am from Denmark and can not find a viable speed 1x30 any were ind EU. But the machine you use to strop i can find easy. could you use it with an angel guide as a knife sharpener too
To fix the strop belt from delaminating use Barge contact cement used in shoe repair.
Thx so much for the reply info. Very generous of you.
Hey Cliff you inspire me man. I’m going to go talk the organizers at my local farmers market and see if I can set up a sharpening booth.
Not that you are asking but remember you only get one chance at first impression with customers...so be ready! ;)
Thanks Cliff. I'll need one drive wheel and 2 guide wheels when they hit your shop. Have a great day bud. 👍
Next shipment is on the way...slowly.
@@CurryCustomCutlery thank you for the update.
Hey Ken so good to see and hear you again, all I have to say is you made me drool with all that amazing equipment, I want them all lol, are you going to be selling kits if so I'd be very interested. Take care my dear friend and talk to you another time. Aloha
Aloha Jim, I think you have me mixed with Kens comment. No worries. Yeah I was training a guy today and we went to the boneyard under the house. Lots of machines live down there still working too. hehe ~ Cliff
Cliff, as always great to get another look. I see you have switched out machines I guess between home shop and van... The Viel is gone, the Consew HF that was the fine belt. I imagine I'm not alone in studying your videos! I waited 2 months for a Viel S9 angle guide ( they seem to be pretty far behind with their stuff,) then had to improvise an extension to the platten because it was so much bigger than I'd guessed. I have wished for a local small job machine shop to do things like fabricate a longer, more solid platten. The unit with the leather belt looks like one from China I've seen on Amazon, but runs around $400 if I remember. Crowning the drive wheel worked a charm. Thanks again. Rix
Yeah always shuffling things around...some get retired to backup status. Eventually they all just start looking like motors turning belts.
Hi Cliff, wonderful info as always! Can you elaborate on your power setup? Do you run the whole day at the market on just the two golf batteries, or do you run a generator or plug in sometimes? How do you charge the batteries and how long will it last with constant use? I see all the lights on in the van, and I know you go non stop some days. Thanks for all the great videos, you have taught us all quite a lot! Nick
When the setup was fresh batteries could last for up to 4hrs without turning on the van to start recharging.
Lights are led so low power draw. When I start the van in charges the batteries. Simple
Awesome I was really wondering about that unit you’re running the leather strop on. Thanks a lot Cliff
No problem 👍 at a certain point you can realize they are all motors turning belts. Some people get really worked up about them and maybe they will "sharpen better".
Hi Cliff. Great videos. I'm interested in getting a 1/2 diamond wheel for serrations. Would you mind sharing your source? Thanks
Great video Cliff, I uave one of the 1x30 like you showed with the leather belt. Do you have any thoughts on how to amke a angle guide that would work with that machine?
a few guys have done so by taking flat stock and bending to shape then bolting to the frame.
Great video Cliff, and that's how I feel after watching it for the third time!
I've got a chinese 1 x 30 on the way, a bunch of belts and angle guides from you, that I'm going to modify for use, allowing the bolster to get closer.
Thanks again for all that you do for the sharpening community, I find your videos very informative and really enjoy them as well.
Looking forward to whatever's coming next!
You may want to wait a few weeks on modifying your angle guide. Upgrades are almost here!
@@CurryCustomCutlery Sounds intriguing… in what way are the angle guides upgraded?
Thank you very much 🙏, I like this things, I can watch this all day long!! 😊
Heeey thanks brother!
Hi Cliff, another great, informative video. Glad to hear your wheels will be available in a few weeks. I've got everything else I need for the HF 1 x 30 modification and looking forward to it. I still just use the veil 1 x 42. But anxious to use the variable speed 1 x 30. Appreciate all you do for the community. Take care.
You could make a veil variable speed also...hehe
Shipment is slowly moving this way. Maybe 3weeks or a bit more.
Hi Cliff, thanks for the tour. I've been thinking seriously to start sharpening as a side line job.
Take care. 😉👍
You should!
@@CurryCustomCutlery Thanks, having a small business requires technical skills and people skills too, you have both.
I think I need to improve in both fields, take care 😉👍
@@redangrybird7564 you have been a positive supporter of my channel and my journey from way back. Call or msg anytime to discuss how to ramp up successfully.
@@CurryCustomCutlery thanks, sure I'll contact you. 😉👍
Thx, how long do the batteries last?
Thanks.
Appreciate your sharing.
Looking for the new wheels to arrive🔪😁
I appreciate the tour Cliff! Thanks! I like your setup! You've really done well for yourself with this business! Starting a business is not easy.
A tourist industry background from childhood coupled with 30yrs of field service tech repair line up well to support a solid skill set that I still always am trying to improve, grow n share with everyone. Thx man!
Oh I've been waiting for this one for a while, thanks Cliff!
I got my Aliexpress 1x30 like yours, LOVE IT. I'm really stoked. It's a bit expensive for what it is, and the manufacturer doesn't put much care into making sure components don't get little nicks and dings. Also the wheels need to be crowned, mine had problems until I put a few layers of tape on the drive and tracking wheel.
But with all that said, I love it. It's going in the boot and becoming my first mobile rig in the next few weeks.
Agree with everything you said about it. Should have mentioned that I slightly crowned my wheels and it came loose in box of broken Styrofoam.
As usual, another great video. Thank you for sharing your knowledge!
Another great video by Mr. Cliff. Thanks for all you do. Just ordered Mophorn servo motor. Waiting on diamond wheel to be in stock 220grit.
I found the stropping machine> Looked up Buffers
Abrasive Belt Machine 30'' x 1'' DIY Desktop Belt Sander Vertical Horizontal
Belt Polisher Sharpener Grinder with Brushless Motor 550W Fixed Angle
Sharpening Polishing Machine $417. Power regulator with it.
Hes sure advasive on that question wasn't he!
Yeah he sure is. Maybe its because there are multiple sources that constantly change with different prices?
Sorry for the delay I had hoped you would be able to google n find it. I sourced from direct overseas and it came in a poorly packed box but was cheaper.
www.aliexpress.us/item/3256803352240129.html?
Hello i am Peter Mosk from Holland and i like your videos wel. I am starting my grinding business and i use grinding stones a Tormek t8 and a simple benchgrinder. Niw iam shopping for a 1x30 beltgrinder can you give me advise about wich machine i best do pursuits?
Thanks you for your advise.
Greetings
Peter
Great video! Thank you for all the ideas to improve my sharpening business.
Sir. I want start a small business in the uk. Wouldnt the machine with the leather belt on do to start with if i run it with sanding belts. I can strop by hand couldnt i for now?
So cool Cliff, love seeing what you've been up to!
One of these times Ill need to swing by if I get over that way. Be super fun to hang out. Hope all is well with new things!
@@CurryCustomCutlery for sure... Maybe if you make it to blade show, I'm only 2hrs north of that 😀
Picking up my Multitool tomorrow!
Hi Cliff, just discovered your videos and it looks like you build most of your tools? Started my sharpening journey after finding the tormek wet sharpening. Dont see any wet machines in the truck and guessing you are not a big believer in their system? Thanks, still trying to figure out how to begin sharpening.
I'd be a terrible customer because I'd just want to sit and watch you do your work for hours asking question after question. Lol thanks for sharing.
I do offer 1 on 1 training here on Maui ;)
In fact a guy is flying in today for an "advanced follow up"
People do stop n ask while Im working and I dont mind in fact its hard to stop me once we get started on subjects.
I try n hope I dont sound like a know it all. I love discussing things Ive learned and more importantly experienced.
@@CurryCustomCutlery ill definitely have to look you up if I make it to the islands that would be a blast.
Tremendous info in this and your other videos, Cliff. THANKS.
Glad it was helpful!
Thanks Cliff, that was great!
Glad you enjoyed it...
How is that Consew motor mounted? It’s on the adapter that comes with it?
For the stropping machine? That motor comes attached to the frame and is ready to rock. The Custom HF 1x30 I have a how to video on it.
@@CurryCustomCutlery on the serration machine. Diamond wheel.
How can I get the drive wheel? I’m in LA California.
Very nice video definitely got kit envy
Hey Cliff nice van and setup. Will adopt a few of these for my own knife and tool service, can the motor on most bench grinders be flipped on the base? A retailer here has the JET variable speed I really like your setup with the multitool.
I almost forgot, happy new year, may 2023 bring satisfied customers ☺️
Case by case basis I would say to cover my own butt but everyone Ive seen just has a couple bolts attaching motor to base frame. Flip it 180° and resecure. G2G !
Excellent use of space!
Thx Ken, of course that high top mini van is still a short mans game. Im ready for a remodel/rebuild in next few months before it all falls apart. Improved dust collection and space utilization is names of the game.
I’m a total nerd for workspace tour videos.
Its reality, things are breaking n messy in places. Always more to do.
I'm learning from you and planning my 1x30 around much of your teaching and hopefully might teach you a little ( perhaps I'm reaching to high.) Hopefully you'll be a little impressed. Within a few months and might make a video of it
Sounds great! Please piggy back off anything that can be learned. A good discussion and encouragement of others is all I strive for.
Maybe I missed it, but what is the name brand of your stropping machine, and serrated machine -and where can they be purchased (or parts to modify as you seem to have done)?
Thanks
Keep up the great videos. It's nice to see how other sharpeners think and work. The only question I have is rough side vs smooth on the leather stropping belt. I have used both ways over the years on my 1 x 30 but not sure if there is a right way. It looks like you are using the smooth side.
Aloha Mitchell, I couldnt agree more. Some different steps often done to get to same ending. I still change up my routine mostly to keep flexible I will use felt for a few months then switch to leather to season a new belt. I had just flipped to smooth side to give it a run with emultion but my goto is fuzzy side out with a touch of compound then 3u emulsion for the day. Leaves me smiling...cheers!
Thank you so much for the information, you are an amazing resource to have while i am researching how i want to start my sharpening business. Would you be willing to tell me about how long those batteries last you and how you keep them charged?
They are over 4yrs old now and have lost a bit of their range but they still can run for several hours with vehicle off.
When the vehicle is on the alternator charges them back up very quick. There is a swithing device called an isolator under the hood. Look on amazon and read up a bit. Not hard at all to install.
@@CurryCustomCutlery thank you so much for your response
On the Stropping machine? The speed control? Did it come with the machine?
A lot of people say they don't work or have not found the one you use.
Like the video's. The first time watchers need to keep is simple for us.
When you add captions the is very usefull.
sorry Jim when you rapid fire multiple questions it makes it hard to answer.
Mahalo mio amigo, how are you hombre, you definitely looking good my friend . . I just would like too say mucho grazias you are a good man for showing me your machine's . . .
Nice to see you after so long ;) " hallo ha " from Belgium
" hallo ha " :)
Hello again, do you happen to have a video that you’re doing a review on the leather strop grinder?? I found this grinder/stropping machine on Amazon for $400 and can’t find any more videos or reviews of it and I was wondering if I can use this machine for making knives and not just polishing or stripping w leather belt. Any info from you on my question would be very appreciated and grateful?!! Thanks again
Battery specs please.
Inverter specs, name?
Appx. Prices?
Also, are the batteries wired in parallel?
Thx so much
2 Golf kart 6v batteries from Costco $100 each
3k Inverter from amazon cheap kind $200 maybe
Batteries wired in series and using a isolator to allow them to be charged by the vehicle when engine is one and disconnected when off.
www.amazon.com/MaySpare-Battery-Isolator-Sensitive-Automatic/dp/B081JL6ZXP/ref=sr_1_3
The Stropping machine? What name is on it? Is the variable control come with it? Or What name is on that? What size belt is on it? Something from Amazon?
Originally it was on Aliexpress. It doesnt have a name. Now its on amazon but I cant find the link. Its variable speed and a 1x30 size. Its not cheap but does ok.
Why do you have that thing set up spinning the wrong way. Whatever floats your boat. I guess it really doesn’t matter. But every bench grinder I’ve ever used spun down and not up.
You are correct the bench grinder spin down towards your feet. Its mostly a sharpener that you have the wheel spin away and you work on the top part horizontally. It is a point that we try to emphasize with both belts and wheels you MUST be sure at all times what direction it is spinning and if its safe to go edge leading or trailing into it.
Amazing as always Cliff! How is the battery system holding up?
Holding up n still functioning 4yrs later? Batteries maybe have 80% of the life they once had which means I can only sharpen 3hrs without turning on the truck for a few minutes. Not bad for a $500 fume free solution.
How did you set up the battery system?
Great video cliff. As any person goes down the sharpening route you have evolution. If you were to start all over again as if you lost it all. What would you bring in as your core machines?
Without a doubt...and its still just one guys opinion. I completely believe the 1" belt is best for sharpening. Having said that I also think a 2" wide machine is a requirement to do heavy work like thinning and reprofiling.
I know I dodged your question but I also dont think the machine matters. Its just a motor turning a belt.
Speed, pressure, direction are all more important then the machine. 2000rpm, medium to light pressure, edge leading(with angle guide for safety and precision) Cheers
Great tour video!! Where can I find that small grinder you have the leather belt on?? I would love to get one!!
It is linked in the first comment below
@@CurryCustomCutlery thank you so much for the link!!
I have enjoyed your videos. I have a question and you have probably already answered it, but have you used the Ken Onion edition with the 1x18 belts? Do you think the 1x30's are better? Thanks.
Both work and can work well for people. The smaller form factor is a plus for portability but it lacks the same durability and flexability to do different tasks IMHO.
Hi Cliff,
I would like to ask you about how do you deal with the metal dust and particles from the sharpening process? I mean is the air cleaner enough?
Does the metal dust get inside the electronics of the van or the machines?
Thanks, stay cool, all the best.
That's a great topic for a video and one of high importance. I'm writing it down now and we will cover it as I move into my new location and set up a new system.
@@CurryCustomCutlery Thanks, is a good topic for a video 😉👍
Hey there Cliff, do you park that van in the house? That would be a bummer if something happened to it. All the best
Concern noted. Back when I turned "pro" first thing I did was save up and stock up so I have backup machines and inverter etc just in case of accidents that can happen in many forms. Im currently looking at a van upgrade but it does have locks and alarm and is parked very visible spot. Thx 😉
Is that a threat?
How do you true the rubber drive wheel?
carefully hold sandpaper against it while its turning making sure to keep clear and dont get tangled up.
What course are the two belts you use there?
Cubitron p120
Trizact a30
Leather stropping belt
3u Diamond emulsion
All products available on our website:
shop.currycustomcutlery.com