Lol ayyy ryan's postin back again!honestly i like your channel because it's one of the more informative channels on airsoft.maybe you should try posting other content on this channel if you ever have time.
Feels good to have a Staccato P Hi-Capa 4.3. All the benfits of the platform and based on a real duty pistol. Add in a thread adapter and a 5.1 barrel and it has 5.1 power as well
My man! I always argue in favor of the 4.3, but always get met with a tsunami of downvotes and very angry people. The shorter pistol just makes so much more sense, and barrel length does not determine accuracy in these, only a couple fps.
Black hawk Omnivore holster..... I'm pretty sure it will work on a 4.3 considering the fact that the holster holds onto the light not the gun.... Make sure it's the TLR1 version
Well, since you're posting, I'm looking for what is essentially the best out of the box m16a3/a4 available. You previously mentioned the G&P one, but not in any detail. Can you expand on this?
replacement and compatible externals are pretty widely available and its easy to modify to make it exactly the style of gun you want or build different upper receiver assemblies. I also like VFC a lot for a lot of the same reasons. The G&P has a better motor in my opinion but the VFC externals are a little nicer. Hard to go wrong with either though
hey idk if u still check this channel but just wanted to ask u a question. So i'm fairly experienced working on aegs and i've been building my friend a high speed ssg for a little now and everything is fine except with the 3034 mosfet we used. the motor wires are too thick and it doesn't let the motor slide in properly. The motor is just jammed in really tight and doesn't move up and down with the spring at all. And we can barely fit the motor plate on even if i back the adjustment screw all the way out. any tips? thanks
errr sometimes if you route the positive wire along the bottom of the grip instead of straight up this can solve the problem. Most girps weren't actually designed to run the wires straight up to the connections.
Hi, I have a question. Which gun will show the best result? We need to take HiCapa 5.1 & 4.3 basic equipment, and measure the speed of the ball. After that, we change the barrel to 6.01 and once again measure the speed of departure of the ball.
Good video, man. I've been thinking about the same issues you describe about the 4.3 being a better choice over 5.1, M9, or Glock style. Do you have any thoughts/experience with the WE 4.3, specifically the newer versions? A metal WE is $110 and a polymer TM is $175. Trying to decide...
I agree with you on hicapas being a great platform all around and the elite force 1911 tac the stock hop ups suck yes aw custom does sell a after market barrel and hop up but why sell your products with a hop up adjustment that doesn't do anything anyway good video please make more I enjoyed what you had to say
Just started watching and I guess you would be the person to ask, where for the love of god can I buy aeg motor neo magnets sepseparately? If not what are the demintions of a aeg motor magnet?
Honestly if we wanted to talk just about practicality, AEP for the win. Cheap, accurate, large bb capacity but small mag, not weather affected, no gas expenses, low maintenance, etc. But nobody wants an electric puny 200fps pistol.
the power and lack of parts are the biggest downsides to the AEP's. It would have been nice to see more advancements for that platform but air volume and lack of broad interest sorta killed it.
With the amount of work required though it begins to be less and less practical, especially with the current gas offerings. Although nineball does make some cool parts for those platforms.
Gabbe co2 has a higher psi and can really dry your gun out fast. It also is really cheap. Green gas has a lower psi but has lubricant in it. It also is more expensive.
To be more specific if your using a hi Capa whatever you do don’t get co2 mags always go greengas or hpa, for co2 you have to be careful since some co2 guns shoot really hot so make sure that they’ll be legal, I don’t recommend co2 for anything except outdoor since you have that higher psi you can be more effective since your, well outside in the weather. For greengas I would recommend indoors like I said before, greengas runs at about 120 psi which is good for indoors and it’ll make sure your not shooting hot, one last thing co2 is a cheaper option than greengas
I agree with you on hicapas being a great platform all around and the elite force 1911 tac the stock hop ups suck yes aw custom does sell a after market barrel and hop up but why sell your products with a hop up adjustment that doesn't do anything anyway good video please make more I enjoyed what you had to say
I'm still watching 👁
Still watching! This channel helped me out alot when I started teching
Lol ayyy ryan's postin back again!honestly i like your channel because it's one of the more informative channels on airsoft.maybe you should try posting other content on this channel if you ever have time.
Feels good to have a Staccato P Hi-Capa 4.3. All the benfits of the platform and based on a real duty pistol. Add in a thread adapter and a 5.1 barrel and it has 5.1 power as well
My man! I always argue in favor of the 4.3, but always get met with a tsunami of downvotes and very angry people. The shorter pistol just makes so much more sense, and barrel length does not determine accuracy in these, only a couple fps.
lol 4.3 master race ftw
He is not dead! Wohooo!
Tim Ehnert still dead
only dead inside!
valleyriverarms pls more videos
dude i love you in all your evike and node ttt vids man youre a really legit bro keep it up
thanks man appreciate it.
Black hawk Omnivore holster..... I'm pretty sure it will work on a 4.3 considering the fact that the holster holds onto the light not the gun.... Make sure it's the TLR1 version
It will but that holster is so damn bulky.
Everyone Loves proper tech teardowns!
I just bought my raven hi capa 4.3 and the gun is amazing great video man
In terms of light bearing holsters, safari land holster for a glock w/x300 fits the 4.3
Good to know!
now you can get the blachawk omnivore holster for your TLR-1. and boom, you can now fit any pistol that can use a TLR1/2
This channel is the the reason I got into airsoft teching.
glad to hear it!
This upload cured my clinical depression
Still watching dude!
Love both High Cappas!
Great video... As a gold match and a 4.3 owner I do agree.
Although my gold match is a lot more accurate and shoots further
Well, since you're posting, I'm looking for what is essentially the best out of the box m16a3/a4 available. You previously mentioned the G&P one, but not in any detail. Can you expand on this?
replacement and compatible externals are pretty widely available and its easy to modify to make it exactly the style of gun you want or build different upper receiver assemblies. I also like VFC a lot for a lot of the same reasons. The G&P has a better motor in my opinion but the VFC externals are a little nicer. Hard to go wrong with either though
Happy to see you're back Ryan! Also congrats on the job at Evike!
I shop at Evike, when did that happen?
Skirmisher he's in the marketing department
thanks!
been working there for about 5 years now
cant find many 4.3 slides can you recommend some?
Ethan Webb Guarder slides are terrible. They’re made of cheap pot metal and are not fully drop in/compatible
Alpha airsoft has tons of 4.3 slides. Mostly infinity slides
Check out my 4.3 build on Instagram , pots.blk.2 . I’m pretty good with building hicapas so I’ll be glad to answer any questions 👍🏻
matt worley Airsoft gateway also has a good amount of slides
alpha was solid
Built 3 glocks, might be time to get a hicapa project going. (but then i need new mags,pouches,holsters,aaaaaaaaa)
yeah the struggle is real.
I think i have built two more glocks since. no hicapas yet
I didn’t know you had your own channel! Instant sub
hey idk if u still check this channel but just wanted to ask u a question. So i'm fairly experienced working on aegs and i've been building my friend a high speed ssg for a little now and everything is fine except with the 3034 mosfet we used. the motor wires are too thick and it doesn't let the motor slide in properly. The motor is just jammed in really tight and doesn't move up and down with the spring at all. And we can barely fit the motor plate on even if i back the adjustment screw all the way out. any tips? thanks
errr sometimes if you route the positive wire along the bottom of the grip instead of straight up this can solve the problem. Most girps weren't actually designed to run the wires straight up to the connections.
Hell yeah dude!!! moaaaar videoozzzz
kaaawaaaiii desssuuuuuuu
long time no see😂👌
this video makes me wanna get a hi capa... or upgrade my MEU rofl damn you ryan
Dads back guys
Hi, I have a question. Which gun will show the best result? We need to take HiCapa 5.1 & 4.3 basic equipment, and measure the speed of the ball. After that, we change the barrel to 6.01 and once again measure the speed of departure of the ball.
You're probably going to get more power off of the longer barrel
Is it Airsoft Masterpiece Infinity sight fracker slide?
it's a 4.3 sight tracker set
Where are you?
How do I put a tracer unit ??
threaded outer barrel
Good video, man. I've been thinking about the same issues you describe about the 4.3 being a better choice over 5.1, M9, or Glock style. Do you have any thoughts/experience with the WE 4.3, specifically the newer versions? A metal WE is $110 and a polymer TM is $175. Trying to decide...
Jo my man, did you buy a we 4.3? Can you give me a quick overhaul if it's possible?
I would go AW custom
I also recommend you to hpa tap your mags and then buy hpa tank and line because you wont run out of air and you can keep shooting the same fps
i hate running a line
I might have missed it but can we use a Co2 mag on 4.3 hi-capa?
Not a stock TM but if you've done all the right upgrades sure
Does anyone know the barrel length of the WE full metal Hi-Capa 4.3 GBB 2011 commander pistol?
91mm or something like that idk
Why does ur 4.3 have a 5.1 sight?
because i replaced the slide
we still watching
Hey what are your opinions on the Cybergun FNX-45? If you have any.
its neat. Too big and heavy though, and doesnt fit my hands.
Now u have inspired me to build a DSG
glad to hear it man
I am still waiting for a new vid plz come in with new vid
Good video, like the type of topic
I agree with you on hicapas being a great platform all around and the elite force 1911 tac the stock hop ups suck yes aw custom does sell a after market barrel and hop up but why sell your products with a hop up adjustment that doesn't do anything anyway good video please make more I enjoyed what you had to say
Just started watching and I guess you would be the person to ask, where for the love of god can I buy aeg motor neo magnets sepseparately? If not what are the demintions of a aeg motor magnet?
no idea tbh
Hey would you recommend a m&p9 for a pistol?
nah
Honestly if we wanted to talk just about practicality, AEP for the win. Cheap, accurate, large bb capacity but small mag, not weather affected, no gas expenses, low maintenance, etc. But nobody wants an electric puny 200fps pistol.
Guntech762 lipo mod and nineball upgrades can get almost 300
the power and lack of parts are the biggest downsides to the AEP's. It would have been nice to see more advancements for that platform but air volume and lack of broad interest sorta killed it.
With the amount of work required though it begins to be less and less practical, especially with the current gas offerings. Although nineball does make some cool parts for those platforms.
added a like since I saw you on Joe Jo's Vlog
5.1 is great for long range
4.3 for cqb
ah yes my long range pistols
What's the best Co2 or Green Gas??
Gabbe green gas for indoor, co2 for outdoor
Gabbe co2 has a higher psi and can really dry your gun out fast. It also is really cheap. Green gas has a lower psi but has lubricant in it. It also is more expensive.
Gabbe it's all based on preference and what you're using is for
To be more specific if your using a hi Capa whatever you do don’t get co2 mags always go greengas or hpa, for co2 you have to be careful since some co2 guns shoot really hot so make sure that they’ll be legal, I don’t recommend co2 for anything except outdoor since you have that higher psi you can be more effective since your, well outside in the weather. For greengas I would recommend indoors like I said before, greengas runs at about 120 psi which is good for indoors and it’ll make sure your not shooting hot, one last thing co2 is a cheaper option than greengas
again, it has been a years and couple months
and it might be more
8:14 dude you got like a seizure or something?💀
im still here
Are you still alive
I dont think soo
nah
bro, you waited 4 years.....@@valleyriverarms
nah bro we are here still using your very relevant information
JK Films!!!
yes me asking you on you and matts live streams worked thanks ryan
more vids my man
5.1 master race. More FPS, more after market slides. More sights. More better.
more of deez
More!
TM 1911 Master Race
not enough gas in the mag design if you get a metal slide.
Make more videos dad
mebbe son
So why not the glock? I dont have time to watch the entire video, can some one tell me please?
because deez
yassss!!!!
has a 5.1 with a 2" comp ;))))
More more more
I have a 5.1 and what he says is true about it so ima downgrade to 4.3 so it can be easier to move with :)
Yeeee
Moar
good luck finding holsters lol
4.3s fit in Safariland Glock 17 holsters, and it's not hard to find those.
yeah its kind of a pain. there are at least 3-4 makes that I know of that will fit though
Why do you look like ricegum
because all asians look the same
I agree with you on hicapas being a great platform all around and the elite force 1911 tac the stock hop ups suck yes aw custom does sell a after market barrel and hop up but why sell your products with a hop up adjustment that doesn't do anything anyway good video please make more I enjoyed what you had to say