I Built The Perfect 1000HP Sleeper... This Is The FIRST DRIVE!
HTML-код
- Опубликовано: 5 фев 2025
- Today we button up a few things on the Volvo Sleeper: a whole new ignition system including relocated coilpacks, new spark plug wires, new vacuum routing, and a cleaned up engine harness. Then, we take the Volvo for its first official drive!
Evolution Power Tools ► aspireiq.go2clo...
SUPPORT ME HERE! ► / gingium
OTHER VIDS!!
Quick Builds► • Quick Builds
Drift Truck ► • Drift Truck
Rally Miata ► • Project Rally Miata
Eclipse ► • 1G Eclipse
LS Volvo ► • Volvo Sleeper
BE MY FRIEND!!!!
Follow me on Twitter ► / _gingium_
Follow me on Instagram ► / gingium
MY RECORDING EQUIPMENT!!
Camera ► amzn.to/3lVq7J9
Lens ► amzn.to/3yhf168
Microphone ► amzn.to/3q4pv5x
Tripod ► amzn.to/3pOGiZR
Carry Bag ► amzn.to/3rV50uz
SD Card ► amzn.to/3lQdv68
MY FABRICATION/MECHANIC EQUIPMENT!!
Welders & Supplies ► www.usaweld.co... (code: GINGIUM)
CNC Plasma Table ► store.langmuir...?aff=23 (code: GINGIUM)
Tube Bender ► www.roguefab.com/ (code: gingium25)
![Surprising our SUBSCRIBER with his DREAM CAR BUILD! (Full Transformation) : 2014 Subaru BRZ [4K]!](http://i.ytimg.com/vi/vxFl-LMX1r4/mqdefault.jpg)
![Surprising our SUBSCRIBER with his DREAM CAR BUILD! (Full Transformation) : 2014 Subaru BRZ [4K]!](/img/tr.png)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I feel like it needs some sound insulation underneath the hood, so the whole car becomes super quiet when you put the exhaust into quiet mode
It’s hard to tell through video but the engine noise is actually VERY quite with the valve closed. The problem is the tone and “chop” of the exhaust is still noticeable behind the car. Not much I can do to fix that
@@_Gingium_ maybe put a speaker that plays the sound of a stock Volvo to mask the chop? That might help
Redblock with a h cam doesn't sound entirely different. Hope the original engine went to a good home.
@@_Gingium_ "The problem is the tone and “chop” of the exhaust is still noticeable behind the car. Not much I can do to fix that" THEN IT'S NOT A SLEEPER if people can tell lol. I saw the video where you installed the valve, that thing still sounds like a truck, anyone who falls for your "sleeper" is a moron that just started driving
guarantee some exhaust professionals know how to fix that chomp from the back
SEATBELT buddy, it's even a Volvo invention!
Other than that, this is an absolutely immense build.
Hey I put it in for the second test drive!
@@_Gingium_ Congrats you're only 50% dumb
@@_Gingium_ Always, always on..
look at some Russian dash cams and you realize that is it not you dependent on safety...whenever will hit you and without any belt you probably loose
As someone who works in ICUs, wear a seatbelt. I can't tell you how many people I've taken care of with traumatic brain injuries because of no seat belt and no airbags. Trust me you don't want to be a vegetable with grey matter leaking out of your cavitated face.
@@tj_offroad I am a chiropractor so I work on them after they see you, and of course they are much worse off if they had no seat belt...ESPECIALLY if they hit the airbag which wasn't designed for unrestrained occupants. It's a habit that should be beaten into all of us. Personally I developed it as a habit when I owned a 1967 Impala with a vinyl bench seat; it's really hard to do cookies in the winter when you are trying to hold onto the steering wheel to stay in the car LOL.
I'm always so jealous when I see people that have basically any tool you can imagine at their garage so they can do anything they want. This is awesome
Me too :(
The cost of all that will usually be many-fold the amount spent on the project.
Someone gotta throw us a quick million🤣
... but uses a shifting spanner to tighten something. 🙂
Yeah, but the guy also has incredible vision, skill and art. The tools help, but looks like he could do great things with a roll of gaffer tape and a spoon.
Yeah, even if you gave me an entire garage like that I still wouldn't know how to add or remove something from the car.
@@slice6027 hence you likely don't need one
I know it's been said plenty of times before, but I still just can't wrap my head around the level of growth this channel has seen over the years. I mean, think about it: Not that long ago you were sticking bolt-on parts on Miata's. Then you were fabricating tube frame chassis. Now you're putting an LS in a forty-year-old station wagon. Truly incredible. Keep doing what you're doing man.
Paul Newman and David Letterman stuffed Doug Nash rowed SBC's into Volvo wagons 30 years ago. Yawn.
@@genefogarty5395maybe take a nap eh bud
@@infinityiznow Zzzzzz.
@@genefogarty5395As I recall, they used SBFs not SBCs. Paul and Dave wrote checks to have someone else build the cars. Nothing wrong with that but it’s an apples to oranges comparison.
@@Union53992 One blown Ford in a 960 and it was nothing like the 377 and larger SBC equipped versions they all played with to get what they wanted. Letterman still has the 740 with the all-aluminum turbo'd Donavan 410" SBC. Whatever.
A friend and I built a 244 in the late 80s, and a 264 in the early 90s.
Both 350 4 bolt main, double hump 1.94/ 1.5 heads, 350 hp 327 cam, suspension parts from IPD.
Blew the doors off rabbit GTs.
Weren’t the fastest things on the road, but surprised a lot of people. We had a great time with them for several years.
You brought back a lot of good memories, thanks.
Got a ‘78 262C Bertone Coupe in the shed I would like to pro-street some day.
Your craftsmanship is literally insane, huge amount of growth on your end from all these projects. Keep it up man!
*figuratively*
I admittedly don't watch an awful lot of modified car content on RUclips but when I have seen "sleeper" builds of cars you can always spot like an oversized exhaust, the interior looks like its not stock at all, its sat lower than a stock model would, even at the front there's usually a fairly obvious inlet. This is for me the best true sleeper car I've seen so far. Amazing work!
Did collision repair on
the 240 Volvos and 740s many years. These cars were engineered for the collision repair tech to make easy quick repairs to perfection because of Volvo engineering. You won't find a better car to do high quality collision repair like factory.
I'm extremely envious of the reaction Caleb gets when he pops the hood. But its more than well deserved. Keep it up!!!
Best part about this car is popping the hood and seeing peoples reactions!
An old saab sleeper would be sick too! Awesome vid as usual
Convert to rear wheel drive! =)
There are a LOT of really cool sleeper ideas
An 2000's saab with a tune is basically a sleeper already
@@mathiasnkristensen haha yess
@@mathiasnkristensen Agree 😎
Wear your seatbelt.
Pussio
@@Redacted1312volvo were the ones who invented the modern seatbelt💀
I’ve known 3 people that died in car accidents. 2 of them were from the fault of other people. And all 3 of them weren’t wearing there seatbelt.
@@sihiri_kabari so other cars could match their safety
K.
I added the firewall strut braces to my 240 and it made a huge difference. I think you missed out on that opportunity to be honest. I still have love for you....
Not honestly sure if it'll fit anymore, but I'll give it a shot!
Make sure your brake master cylinder does not have any preload on it.
If it's even slightly depressed, it blocks off the return so then when your brakes heat up from driving, the fluid expands applying the brake which then expands more from the brake being applied while driving etc etc etc... And you get massive brake drag until the wheels lock up.
Just a tip:
Adjust the cutting height of the metal blade before cutting. Just a millimeter or two should go all the way through. Otherwise your cutting heads will go dull in no time 👍
Love the car, but please use seat belt
Yes...he doesnt use the one thing Volvo invented and introduced..the seatbelt...but he got wiser in the end at high speed😂
When I was a kid there were tons of these old Volvos floating around. Hand me downs, from parents who couldn't kill the thing in the 20 years or so they drove it. Most of them got junked, they never stopped running, the interiors just dissolved in the sun.
In all my years as a car guy this is by far the BEST sleeper i have ever seen. I have never seen this much power in an absolut stock looking car. Also its a Volvo, this makes it even better. Good job!
wait til you see my hellcat swapped solstice. should’ve documented the build and made a youtube series out of it but i just didn’t. haha, bought a 16’ hellcat for the donor, and threw it in an 07’ solstice convertible 😂 it’s insane. 760 hp with the cold air intake, exhaust and tune👍👍
i might as well start a channel making content with the car. i’ve only taken it to two meets so far, considering i just finished the build a month ago, and working in the oil field has me working all the time and when i’m not, im tired as a motherf*cker 😂😂 but everyone who seen the car loves it, and it’s a sleeper because i keep the valves closed when im feeling conspicuous and have everyone shook when the whine starts screaming 😂 oh also, i got a lower pulley kit coming in, it’s smaller 😂
The amount of quality in the build but also in the video and montage is astonishing. Keep up the good work Caleb !
Thank you so much!
Saw
@@_Gingium_ Bro your build is awsome. I own volvo s80 and planning to convert 2014 volvo s80 d4 into electric 4wheel drive with 800+hp. Won't be very fast, but will exelerate crazy like a sonic!
I wish I could be part of this environment where you meet with all the other guys. Amazing result from all your hard work, it is unbeliveable what you have created.
Just join some Facebook/Instagram car groups and go to meets.
@@delta-tuning Hard when you live in a country thousands of KM's away lol
@@atteblo3303 Not really, most places have even small car meets. I got friends in the middle of Norway that still have meets within like 100 miles
Weird comment. I am an artist and I find it endlessly fascinating watching these de construct re construct videos with such intense unique knowledge that results in a super car. Amazing.
You win the award for Sleeper. Never seen a better one.
I have an 88 wagon that I've owned for the last 25 years or so. I just keep it going with bailing wire and duct tape. Great to see this brick getting the love and respect it deserves.
Your car builds are some of my favorite on RUclips. Where as most guys on here are more so very skilled back yard mechanics, you are an actual fabricator and builder. No disrespect to any of the other guys on YT, but your builds are just next level. Great job!
If you like this, search for project binky
When I see this level of professionalism, I immediately wonder why someone from nascar hasn’t seen this guy and put him on the payroll. He’s not just ur average mechanic.
The quality of content lately has been so good. 👌 so excited for more builds, camping, track days etc.
You scrutinize yourself too much, it get you may be a perfectionist, but know this looks incredible to anyone that builds in their garage. Amazing job👏🏽👏🏽👏🏽👏🏽
Brilliant work, we swedes love to see You guys at the other side of the pond, breath life into old volvos,The ultimate sleeper - me like !!😁
Finally glad I found someone that does threads one full turn and a quarter back repeatedly.
Seems like everybody on RUclips just lubes it up and rams it in like an excited teenager!
I always wanted to put a v8 in my 88 244 GL, so glad people are still doing stuff like this :)
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize.🆓🎁
I have a friend who drives similar Volvo, stock version, 750.000km and still going strong. Very good cars those old Volvos.
i know that putting on your seatbelt is not american because it restricts your freedom, you should still do it tho
Now that the coils aren't mounted to the valve covers, this gives you a great opportunity to get custom valve covers that have "Volvo" in the oem font on them
The reactions are priceless. Gotta love a good sleeper build.
So, as a jeep owner, it's nice to see someone doing things the right way. just wish the people who designed my XJ did so well 😂😂😂
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize......🆓🎁
I haven’t really tuned in since the Plasti-dip fell off the School Bus, inspiring to see how far you’ve come with the shop and the videos. Thanks for the great content!
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize..🆓🎁
Bro, if you went to SEMA, go to the FUELTECH booth, you won't regret it, it's the best ECU controller on the world market.
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize..🆓🎁
Classic gingium dogs t-shirt. I would buy that in a heartbeat. Epic video, epic Volvo.
Noted :)
No one gonna talk about his comment was made 6 days ago when the vid came 2 days ago???
@@nitrousracer000 patreon bb
I Know one thing, it's a great feeling to be back behind the wheel of a Volvo wagon. Thanks for the great video and let your light shine! If the booster goes out there is no fade on pedal after engine is started, if master cylinder is bad there's no pressure on the pedal, or too much. Good luck, a lot of those rubber lines like to blow out and the calipers blow out after being used too much when they are new. But I'm sure you already figured it out, Nice shop!
Quite fitting to focus on that ambulance during a video where you were driving an untested 1000hp car without a seatbelt on..
Loving the attention this build is getting. I find that single bolt hose clamps are much easier and do a better job than spring clamps. When I am sealing threaded fittings in my house I use a plumbers thread sealant but when I am working on vehicles I will use an anaerobic sealant or an automotive high heat thread sealant.
I want to see you do a blasphemous American classic. Maybe a 65 mustang but with an Audi/VW i5 turbo
Audi i5 VW VR5 not hate just info
@@atragerlspezi9500doesn’t matter
@@atragerlspezi9500
It's all the same company.
@@atragerlspezi9500vw did have an L5 / i5 engine for a little bit. A lot of the jettas used to have it
I know you're going for the sleeper look and I really dig it. That said, back when I had my 245 and worked on it, by far the best two handling mods were the smaller Volvo R steering wheel and Sparco R100 front seats. Nothing too flashy, but gave the car _such_ a tighter feel. Awesome project though!
Very long time fan, first time commenter. You’ve come so far and seeing this stuff makes me so happy! Keep up the great work man. Love the relaxing build videos!
Well done sir! The way the light reflects off the ginger arms providing ample work light in dark corners…🥕💡
@15:06 Seat belt bro...
My 300hp 83 245Ti was enough to keep me happy... can't imagine 1000 hp... heheh... much love from a Volvo Sleeper builder/lover!
Guessing the brake pedal throw was too short to allow full release of the brake pads so that every time you pumped the brakes it gradually keeping pad pressure on the rotors? Had that happen on my 88 pathfinder after replacing the booster.
Amazing build. As a carpenter who uses circular saws You should always set the depth of the saw blade to the material so it won't bind save your fingers if they're underneath too
Careful dumping hot metal shavings in the trash like that one slow burn and everything you worked for is gone the next morning maybe its not that hot but from the video it looked like it could have been dangerous.
That’s actually a really good point I never thought about. Thank you 🙏
Yep angle grinders transfer heat into the workpiece, but metal saws send all the heat into the chips. Makes for a better result!
Similar thing happened at the shop where I work! Co-worker had been welding one day, somehow a spark must have made it into a nearby trash barrel! We closed up at 5-6pm and everything was good. Thankfully the boss came out late that night to check stuff and the shop was completely full of smoke and the trash barrel was smoldering! Thankfully he caught it before it went to flames!
Definitely something to be careful with!
@@dave_kauffman
Ouch! That was lucky!
love the roof racks! all you need is a bike rack and a mountain bike to complete the sleeper look 100% LOL!
That intro is⛽️🔥
I’ve been intrigued by this concept for years but my vision goes one step further. Volvo made a chopped version of this car in coupe form. The leather interior is fantastic. Chopping the back by adding it to a factory chop coupe would be easy peasy. Go for the entire package.
Hey just a heads-up, those white plastic vacuum tees are hella fragile. I've snapped quite a few of them easily, while just trying to remove the hose.
Figured I'd warn ya given your bad luck with unregulated boost in the past. Usually auto shops sell brass ones that are 100x more durable and aren't crazy expensive, but a bit more pricey than the plastic ones.
Yep, I'm absolutely going to replace the ones for the wastegate system!
My father has “threatened” to get me a 70s station wagon as my first car. Me having a thousands of dollars he is unaware of to spend on mods, I say bring it on.
Current plan is put a twin turbo LS crate engine in it and do general drag racer upgrades.
imma be real Gingium has worked his way into being, i think, one of the top ten fabricators on youtube
A 20 minute video with zero commercials Is a very bad sign for this channel. What your doing isn’t working. It’s not the filming or the quality of the content, it’s the content itself, you need to do something fresh. Something to bring people to this channel, and you need to do it quick.
Crazy noises from a rusty 240 wagon for sure!! My dream was a 240 with a 2.3 redhead turbo with the boost raked up some!
It’s hilarious to me how ‘common’ 1,000hp cars are nowadays 😂 especially Turboed LQ9’s and LS’s it’s almost boring at this point. When I was a kid in 1997 our neighbor had a small block Chevy 383 powered boat that had 400hp, it was insane, he later sold the boat and put the motor in a huge K5 blazer on 35’s and it seemed like the fastest vehicle I’d ever seen. Now 1,000hp makes you 1 of 100,000 other people with that much power. Crazy times.
Stellar build! But no seatbelt - not cool, man!
That’s me in the intro, on the knee scooter😭😭
Hope to see ya at a drag and drive it would be cool to get our sleeper wagons together!
Need to see y’all both on Midwest drags? 👀
Definitely going to some sort of drag and drive event next year!
@@_Gingium_ Midwest drags has some spots left. First track is only 8ish hrs from ga
I'd pay to see a Coyote vs LS wagon showdown!
As a volvo 245 turbo owner, i approve of this brick
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize..🆓🎁
Really enjoy watching the problem-solving design and fabrication. Nice job!
Buy a smaller wrench or use a crow's foot. Just use the right tool. Chopping up wrenches is how you start a chop shop. That band saw. The chintzyness of it all. He polished the front of the plate he cut, but then placed it in a vice to drill through without anything to back it. This results in Damaged drill bits, burrs from the blowout and witness marks from the vice's jaws, completely ruining the polish/finish.
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize.🆓🎁
makes a 1000HP sleeper, doesn't think it's smart to put on his friggin seatbelt ... wtaf
This is what a sleeper is a car that doesn’t look modified at all it just looks like grandma’s station wagon until it’s beating u
All I see is 45hp 🤔
growing up we had same blue 240! so many good memories sitting in jumper seats in trunk making faces at cars behind.
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize......🆓🎁
I think it would be a better sleeper if you mounted another muffler after the exhaust valve to make it more silent. Like a super silent and open up breathing hellfire kinda setup. 😁😎
I’ve fit as many mufflers as I’ve possibly could 🥲
What's that program you use to take pics and lay over a design?
Hi guys - great work! I drive a 2008 V70 223 HP, 435000km - just great! (4WD, automatic gear change), takes 6.7 l diesel
SEATBELT CALEB.
I love quiet sleepers. I never wanted my cars to have a nasty exhaust rumble. Let the squeal of the tires do the talking.
Bring it to the dealer to get a tail light replaced, switch it from quiet to loud mid repair, and accuse em of converting grandmas precious Volvo to a racecar
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize......🆓🎁
These wagons are amazing for turning into monsters. I know a guy up in Washinton who did it all the time just to break them, and do it again.
As a Swede i cant miss the Like button! 👍
Being quiet is the best part of meetings, and for good sleepers
When I become an engineer I’m gonna get a 740 Volvo and turn into a monster of a car just like you did Gingium!
Loved the BO1 flashbang transition at the beginning
MATE…wow.
I found you through your forza vids, watched you build your mx5’s then unfortunately I dropped off. This vid popped up in my feed and my mind is blown. From an OG viewer I’m so happy to see where you are now! Well done dude 🤙🏼
Hey, when you use the saw, don’t have the blade all the way exposed if you aren’t using the whole blade. Change the depth of the blade so it is only about 1/8”-3/8” passed the material. It is safer. Love you and keep up the great work
Best sleeper I've seen. Low key.
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize.🆓🎁
The look on that kid's face when he sees inside the bonnet (hood) is priceless.
I had a 242 V8 (Chevy 350 / 700r4) back in 2000. It had 28mm IPD front and rear swaybars. Good times...
Most underrated car channel on youtube.
I have dreamed about this car for years, crazy to see someone build it.
I hope you're enjoying yourself brother. Smile a bit, Pat yourself on the back. What an achievement! What a car... Clearly ready for the next project, or a break, very hard to tell ... ❤️
My Parents had the same car..It was Burgandy with leather interior and had a Diesel that was slow as Christmas.
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize.🆓🎁
Two plate size powerful fans (manual)on both sides of the block will keep that bay ventilated during pulls..works for me ..!!
No one is going to suspect the Volvo 🚙💨🔥
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize.🆓🎁
Dude wish you could do that to my 93 Taurus wagon lol and maybe 4 wheel drive for the winter THAT WOULD BE AWESOME
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize......🆓🎁
By the way - when you use ANY circular saw the blade should not extend more than 1/4" below the material being cut.
Thanks for watching❤️. Hit me up👆I got something special for you.......🎁🆓
I'm liking this video, 100% different then the old blue miata days. It's been a year or 2 since I last seen a video from ya, glad to see your still going hard.
This fab sleeper has the bonus of having the best visibility all round ! - Great stuff !
My homie literally had 7 of these Volvos, all same gen and different years and different dealership packages
Thanks for watching and commenting. You have been randomly selected from the comments as the winner for the giveaway. Hit me up via the digits above to claim your prize......🆓🎁
Dude I seriously hug you right now! You've done what I day dream about almost everyday! RESPECT!
Todays the first time I've seen your channel thanks to YT & I couldn't sub fast enough!
Good luck and keep up the awesome work! You're amazing!
It would have been more of a sleeper if you had kept the old engine. Here in Sweden we have a few example where they have managed to get 1000+ HP out of the B230 engine.
Most durable engine ever made !
The need for sacrificing the tool is a hard but W move
Talk about the ultimate sleeper, i was here laughing while you backed that out thinking about it having 1000 HP 😂😂😂
When installing metal roofs we used to flip the blade over and cut the metal panels with a regular skill saw...26ga only