When taking off the upper ball joint instead of using a hard metal punch and take the chance of messing up the threads. Use a 1/2 key way. The metal that is used to make key ways. Wont bend threads.
The metal material, that you make shaft key ways out of. They are not hardened material and make great punches, so you dont scar up shafts, gears, and such
Its called key stock a keyway is the slot the key sits in and keystock will def mess threads up if hit hard ent aluminum would be best but could still mess up threads if hit hard enough im a machinist i work with metal everyday
Hey bro I've got an ducati 848evo the injectors aren't spraying and the digital console has been damaged can you please help me out please reply asap. Thank you.
Well, I hate to say it but I have to: The ATV your working on looks like it was never used ! - In a real life scenario the stuff is not coming apart as easy as you show with as few tools as you show. Your not gonna get those out with just some hammer blows and a punch. You'll need a thingy with two jaws and a center that will screw in and push out the old ball joints, Kinda like a reverse bearing puller! - Guess how I know that. Best Regards from Alaska where we put the ATV to work.
Excellent videos. I’ve watched several. Thank you.
You guys videos are awesome, thanks.
Outstanding video!
What do you mean rock it back and forth on the jack to tell if they are bad?
Great video
top, einwandfrei!!!
Super important to check these often my right side lower front ball joint failed as a result I got a free Life Flight helicopter ride out of the deal
I wish this guy lived next-door to me and was always bored
What size is the circlip
When taking off the upper ball joint instead of using a hard metal punch and take the chance of messing up the threads. Use a 1/2 key way. The metal that is used to make key ways. Wont bend threads.
What is a 1/2 key Way?
The metal material, that you make shaft key ways out of. They are not hardened material and make great punches, so you dont scar up shafts, gears, and such
Its called key stock a keyway is the slot the key sits in and keystock will def mess threads up if hit hard ent aluminum would be best but could still mess up threads if hit hard enough im a machinist i work with metal everyday
Hey bro I've got an ducati 848evo the injectors aren't spraying and the digital console has been damaged can you please help me out please reply asap. Thank you.
Everything on the new Ducati is controlled by electronics. The dealer has the diag computers to sort out the electronic issues.
How do you get the nut off the ball joint if the stud keeps spinning also?
It's press fit. If it's spinning, you may have to replace more than the ball joint.
Use channel locks to grab the stud then wrench to spin the nut ball joints that are worn will spin inside themselves
У него будет какая не будь другая техника или нет?
Well, I hate to say it but I have to: The ATV your working on looks like it was never used ! - In a real life scenario the stuff is not coming apart as easy as you show with as few tools as you show. Your not gonna get those out with just some hammer blows and a punch. You'll need a thingy with two jaws and a center that will screw in and push out the old ball joints, Kinda like a reverse bearing puller! - Guess how I know that. Best Regards from Alaska where we put the ATV to work.
"I'm not buying that Yamaha special tool". me neither.
Great video