Это видео недоступно.
Сожалеем об этом.
DIY: Mini Bluetooth Speaker
HTML-код
- Опубликовано: 4 май 2019
- Homemade bluetooth speaker with nice bass:
Bluetooth Module: bit.ly/3kUia5a
Speakers: bit.ly/2FOXCZ5
Passive radiator: bit.ly/2FLPuZc
Protection board: bit.ly/2YDr4J6
DC module: bit.ly/3vankz5
18650 Batteries: bit.ly/3v1bGGm
18650 Holder: bit.ly/3rqCE8m
Drill Bit used : goo.gl/VpJbLE
B7000 glue: bit.ly/2UQwBgi
2S charger: bit.ly/2VSrhWI
I present you "The Furious Mini Speaker" !
-Simple design, easy to build, painted with black mate spray can
-Tiny 40MM / 1.5 inch speakers and radiators
-Recorded with camera mic
-Protection board with balance function
-(Correction) In the schematic the switch is placed before the step down module
-Size 12cm x 6cm x 6cm
-Schematic at 7:00
Thank you for watching !
Free music copyright list:
Star Party - Legends [NCS Release]
NIVIRO - Flashes [NCS Release]
Ascence - Konnichiwa [NCS Release]
Jim Yosef - Moonlight [NCS Release]
Clarx - Bones [NCS Release]
Raiko - Revenger [NCS Release]
(DC 3.7V 5V 3W Digital Audio Amplifier Board Double Dual Plate DIY Bluetooth Speaker Modification Sound Music Module Micro USB DW-CT14+
AIYIMA 2pcs 40MM Mini subwoofer Audio Portable Speakers 16 Core 4 Ohm 5W Full Range Speaker Rubber Side NdFeB Magnetic Speaker
2S 10A 8.4V 7.4V 18650 Lithium Protection Board BMS PCM PCB Li-ion Lipo 2 Cell Pack with Balance Function Charger Protect Module, Start to finish full video
Easy ,cheap and affordable project, Homemade, wood working, micro boombox speaker)
#DTekDIY
Links, music names and more infos in the description :)
I like your vibes
You
Hxtcub
nicole oliver ò
Melo prestas 2 vivo en. Esquipulas
Once again you did it again it's amazing stunning that little tiny little box speaker sounds God like amazing so nice so loud for a little tiny little homemade speaker that you made my mind was blown you make really awesome really high quality stuff man
How much it costs you?$?? All equipment? Reply bro
This is awesome! Only one question, does it work if you use the usb charger on the board? Or do you have to use 2s charger?
you could use the board charger to charge one or two cells in paralel (always with pcb protection) , in this case i used 2 cells in series and a 2s pcb because it was what i had avaliable at the moment (the batteries have an built in pcb but i like always to had an external pcb also)
Ok thanks!
How many watts is it roughtly about 2x3rms
Bhai plz ye passive radiator kahan se kharida hain
what is the name of this type of drill that you used in the drill to make the holes in the speakers?
Too great. These modules are very powerful and the sound is great
you sell it ??
BROOOOOO, THIS IS A BEST VIDEO I WATHED ABOUT MINI SPEAKERS
What do I need to get more loudness and more bass on a mini bluetooth speaker
YE SIDE VALE SPEEKAR DRIVER KHA SE MILTE HAI ONLINE LINK TO DO.
He gived the link
Link number 2 is that you want
Speaker driver name is passive radiator
Recorded camera name?
You have used rechargeable batteries but What if want to use just use and throw AA batteries. What will be my circuit diagram?
please rply ASAP.
Una verdadera obra de arte
Where u get these small speakers ?
Plz let me tel .
In the Description
How many inches of box do you have to make for this speaker's good effect? Without bass resonance. No Bass Resonance. is going to use Bass Air Tube
For this u can't use bass reflex tube ....u can use pradiator
3w mini speaker price
How much will it cost?
👍
Everything is fine and superb. I have a request that also display the name the items that you have used in itt.
All the parts in description
Su alcuni filmati sono talmente veloci e i componenti non si spiegano da dove provengono e dove potremmo recapitarli ? Mistero da risolvere sé le persone vorranno ancora vedere questi progetti belli in evoluzione. Sperando che sarete d'accordo con m'è al riguardo. Attendero una vostra opinione in merito.
what is the tool called used to hold the boards in places. thats used to clip the items???
"3rd hand"
@@DTeK thanks
Which circuit i use ?
Check the description
Do you remember the hole cutout size? I'm guessing 1 7/16 inch?
the speaker is 40mm, so the holes are around 36/37mm
What kind of paint or material do you use for the exterior of the box?
Its a simple mate black spray can paint
@@DTeK Thanks!
I have a small re-chargeable Bluetooth speaker (one output) with one 3 watt 8 ohm speaker, I want to add one more same speaker, So should i connect it parallel or series ? Please give your suggestions.
Do parallel it gives more power to the speakers
Cool bro
I need to buy one of those. How much does it cost? You should have your own store.
REALLY COOL
Tôi là người Việt Nam, tôi rất thích video của bạn 👍😊
I want this Bluetooth speaker😍
Glad you liked, tanks
nice bluetuth speaker what is the cost
Can I buy it?
Нужно было ставить побольше пассивные излучатели, видно что полного хода динамиков нет, но при этом пасивки в полном ходу
Или не такие тяжёлые
Возможно просто объёма мало
Is it actually producing that kuch bass?? Plz reply
yes, all my builds are recorded with real sound.
Can you make more to sell⁉️
Nice.
I like this.
Kya aap aaise chije bech sakte hai kya muze ye speaker khridna hai
So nice😮
I want to buy it.
How can I purchase it
Wow it is amazing!
Фууудо
can i buy this speaker
What is that wood cutting tool called
check video description for parts list
Are you selling these?
Very nice And good
Sir koun sa gond use kye hai
can I use 5v charger to charge the battery?
no, in this case i charges at 8.4volts, but if the modules charging port you can use the usb to charge it, check my "360 folding speaker video" i use the same module and use the micro usb to charge it.
Why the side left of passive radiator slants? Not perfectly balanced
it looks good to me, maybe its the camera angle.
Do you sell these
Iss plate ka name kaiya hai
Could you tell me please, if I will make it with one battery, do I need this thing which you set up on 5v ? This little chip.
Or it can work correctly only with 2 batteries?
The bt module working voltage is from 3.7 to 5v , you don´t need any step down converters for those voltages, only if you go higher than that
@@DTeK unfortunately, with one battery it's not working. It's probably because of chip of charging. This one can work only from 8v and higher. When I tried with one battery - it's not working. If I put on charging chip one more wire from minus to minus - it's working, but I didn't try to charge)) So, I have bought one more battery.
P.S.
Sorry for my grammar. I didn't have practice in English long time))
@@DTeK and I have one more question. Could you tell me, why did you use in BT chip USB port? Why not that place, where you can plug battery?
@@d3g054 its works with only one battery, make sure you are using lithium batteries, check this video, i used only one 3.7volt battery ruclips.net/video/ifCKTnmIqvY/видео.html
@@d3g054 because i was charging the 8.4v battery pack with the pcb, the bt module only provide 5 volts for charging, i used the 2s pcb because i didn´t have an 1s pcb for battery protection, you can use only 1 battery but use always a pcb for battery charging protection
Sell me one please
Okay
@@parth1_ dónde lo puedo comprar
Can I buy your mini speaker?
Bhai bule or red colour ki machine ka naam Kya ha
Where did you order the speakers
hello, check links in the video description
Speakers two?
4
Is it real loud full volume up on mobile phone
yes
Can I pls buy it?
Awesome 👌👌👍👍🏻👍🏻
How much?
10-15$
@@z1k340 ill take it
I
Very nice
Are those tiny passive radiators
yes
But is anyone so poor, that he must do this?
What is it's output watt bro for speakers
Im guessing its 5 watts
Lo vendes ????
Bhai kha mile ga ye spekar
next time paint the box 1st & make all the connections before glueing speakers in the box. other than that, Cool
VERY good 👌👌👌👌
can you plug usb into the speaker
Cool!
My one speaker plise
It's like Kerala tourist bus sub😂😂
I have a Samsung PS-FC330 single speaker with impedance 3 ohm. I don't know how but
-I want to attach a power AC supply .
-I want to attach a 3.5 mm headphone jack
-I want to attach a Micro usb, a usb-c and usb type a for input.
-I want it to have bluetooth support.
Can you please help me figure out what to do step by step.
Just buy parts and wood. Then you're ready to go
@@YOLOgamer-yq8yf What should I do with the parts when I don't even know what I'm dealing with.
what kind of wrapper do you use?
wrapper? you mean paint? its a spray can black mate paint
Box ka site mein jo Parda lagate ho ho bas ke liye Ye uska naam kya hai Bata Please
Passive speaker
Woh Kahan Milega Mujhko
What was the total price for everything
Hello, parts list in description
How much did you pay for the batteries? Links you have provided show highly unreasonable amount.
they are around 5€ each
How much you spend to do this?plz tell in $
check description
Nice
Plz amazon shoping sa link do
Instrument ka
chep lagna ga sistem kha h esma
Yo use ese amplificador y distorciona demasiado a volumenes altos, alguien me podria ayudar?
Mbvnjbbbv
Bhai bass reditor link bhejo
Yh Muje bna ke send kar skhte ho cost.. Sir
it comes out gold at cost
Wonderfull, 🌹👍🌹 thanks
10:43 looked like cheapy chinese 18650s to me...
Would have been better with branded Panasonic's, LG's, Sony's or Sanyo's...
COMO
they are easy to replace, that´s why i use those 18650 holder cases insted of solder them
Get an eneloop,Eneloop is a company collabed with pannasonic and sanyo.
@@DTeK it looks awesome
If it work it work. Just like that.
Bhai apna bluetooth speaker kitne rupay ka bachoge
15 w sound force
Cristiano LIMA gfxhixzhvdmzxixz jddb
Nice video
I want this product....well u send an order
how i get this ...cute speaker
very nice bro
Меломан нервно блуёт всторонке.))
I like this
thanks, glad you liked
IC circuit kitne rupaye mein aati hai
Kaun sa cardboard istemal Karen
Cascada mudhole
Wow amazing
Hermosa Bocina Bluetooth ❤❤❤❤❤❤
Yytowts
Can't find any measurements for the box...
12cm x 6cm x 6cm
Thanks!
bhai asa spekate kine da bechi GA comtn ch dasi
*This could be a JBL GO*
*JBL should consider this*
More like *JBL GO3*