I just did my sons Odyssey today . Works perfect . Clip the white with green stripe close to the switch , strip back the black single dot wire but do not cut . Wrap the white wire around the bare wiring and check all 4 windows . If nothing happens tape up the black wire and strip back the black wire with two dots and try again . If the windows work tape the wires together and replace panel ...done.
That controller has a problem with the tracks that are near the edge...the humidity causes them to open and they are almost imperceptible...To repair it take a magnifying glass and visually check the tracks and join them with solder and a fine wire if necessary
@@danilosanmi I haven't done it yet but I've found several people who describe the exact same problem and the fix appears to be replacing the switch panel. I found them for $48.
Ese mando tiene un problema con las pistas que se encuentran cerca del borde.. la humedad hace que se abran y son casi imperceptibles... Para repararlo toma una lupa y chequea visualmente las pistas y une con soldadura y un alambre fino de ser necesario.
Thank you! This helped me fix my 2008 Odyssey windows today.
Thanks for the great help !!! i was able to roll up the windows and i took the bypass wire off again....thanks!!! 👍
Thanku man. U a life saver... it workd
Great video! Thank you so much
I just did my sons Odyssey today . Works perfect . Clip the white with green stripe close to the switch , strip back the black single dot wire but do not cut . Wrap the white wire around the bare wiring and check all 4 windows . If nothing happens tape up the black wire and strip back the black wire with two dots and try again . If the windows work tape the wires together and replace panel ...done.
Cool
That controller has a problem with the tracks that are near the edge...the humidity causes them to open and they are almost imperceptible...To repair it take a magnifying glass and visually check the tracks and join them with solder and a fine wire if necessary
Thank you!!
if you jumps it ,your relay actived alltime so mean you drain battery (drain 120ma like you open door )
No battery drain on mine, it's still working
Thank you! I have the exact same problem
Jonathan how did you fixed?
@@danilosanmi it wasn't the relay in my case, I'll have to get into the door.
@@danilosanmi I haven't done it yet but I've found several people who describe the exact same problem and the fix appears to be replacing the switch panel. I found them for $48.
Did your other individual window switches work on the doors? My driver window is the only one that works in the van.
Can't remember exactly but I believe they didn't until I put jumper wire. Not 100% sure about the individual switch on other doors.
It work i just did it
Is it possible it's just a fuse?
If i wanted to buy the switch, what would I look it up under?
Power window master switch
Did this ever end up draining the vattery
No sir.
No sir
Ese mando tiene un problema con las pistas que se encuentran cerca del borde.. la humedad hace que se abran y son casi imperceptibles... Para repararlo toma una lupa y chequea visualmente las pistas y une con soldadura y un alambre fino de ser necesario.
Que tal hermano. Con ésto se soluciona el problema?
@@fudgin430 en mi caso yo lo solucione así le hice una inspección visual y di con el problema.
What are the colors of 2 wires ??
White with green and black wire