Here in 2023. I just had this problem last night after using pressure washer for a few hours. I could not get the hose off & even tried pliers on the couplers which damaged the rubber on them. If this is such a problem because of different metals, why are companies making them this way? I will try this trick & hopefully it might come off. The other trick was that I had to relieve the pressure out of the hose first & that worked, but it seemed to have worked just once. Update: I was finally able to unscrew it off by just working at the rubber coupler with pliers, although now the rubber is chewed up a bit. I applied the oil/grease afterwards, as in the video & that is going to help a lot in the future to keep it from seizing again.
Fantastic ! I had the replacement part, but had no clue how to get the old hose, which had seized up quite well, off of the pressure washer. Thank you and a big thumbs up 8-)
My gun broke so we bought a replacement. We attached gun to existing hose but as soon as we turned water and power on the hose exploded. I thought maybe there was a kink that I didn’t see so we bought a new hose. We made sure no kinks after connecting to washer and gun. As soon as water and power were turned on hose exploded again about halfway down the hose. We can’t figure out what is wrong. Hose and gun are the model replacements for our washer that is listed online.
@@aaronwinV any luck yet? i have had the problem for about a week now (hoping to use a longer hose) but i can’t nor can anyone else unscrew that thing 🙄
Thank you for this video. Here I thought I needed to buy a new hose. I do have a question for you. Would a silicone spray be good to use on the o-ring?
So the black cylinder that was unscrewed and pushed down is what he called a coupler. My coupler has detached from the string guard. Correct me if I'm wrong, but this coupler, when screwed on after the fitting is inserted, makes sure the fitting does not detach and "pop" out of the brass/bronze fitting on the gun. This is my problem now. I can insert the fitting, but now that my black cylinder coupler is detached, my fitting just pops/blows off from the gun fitting when I turn on the hose. How do I fix this?
Hi Angus, and thanks for leaving a comment! Unfortunately, I'm not totally sure what you're referring to here. If you'd care to elaborate, we might be able to help with your question!
Never had a high pressure hose cracked, one is over 30 years old. Never had one won't unscrewed either. Ryobi is low end, not surprised they cut corners on the hoses. Don't let the hose touch the hot exhaust shield, it will burn a hole in it. I went through 5 high pressure washers. My electric one is junk with plastic pump and cracked in no time and cost more to replace the pump that buying it again. Maybe the more expensive electrics use brass pumps. Two of the gas ones have unloader problems, where the pump cycles on and off resulting in no pressure. Great Honda engines, pumps not so good. Two working fine, one on the bench for repair remaining two in the trash. Shame all the gas engines were good.
I'm pissed I have a ryobi pressure washer the pressure washer hose was trash. Bought a new braggs and Stratton hose that does not go all the way up now a new hose leaks. How can I fix this I have a ryobi pressure washer
your video starts off with a loud knocking on the front door. listening with headphones at close to midnight, very startling. had to get a weapon and go outside and check the property. very stupid on your part.
Here in 2023. I just had this problem last night after using pressure washer for a few hours. I could not get the hose off & even tried pliers on the couplers which damaged the rubber on them. If this is such a problem because of different metals, why are companies making them this way? I will try this trick & hopefully it might come off. The other trick was that I had to relieve the pressure out of the hose first & that worked, but it seemed to have worked just once.
Update: I was finally able to unscrew it off by just working at the rubber coupler with pliers, although now the rubber is chewed up a bit. I applied the oil/grease afterwards, as in the video & that is going to help a lot in the future to keep it from seizing again.
Excellent. It gets straight to the point. I now know exactly how it works and how to take care of it.
Fantastic ! I had the replacement part, but had no clue how to get the old hose, which had seized up quite well, off of the pressure washer. Thank you and a big thumbs up 8-)
Thank you for this fantastic video !! Replacement process was exactly the same with my Green Works pressure washer
Was very helpful to figure out how to get the connector off the gun. Thank you
Excellent explanation and to the point! Thanks for making my life a little easier!
Great to hear!
Thank you!! The video helped so much
Well that was easy! Thanks for the aide bud, I was getting a bit aggravated. Big help!
Thanks!!
and if you cant even move the plastic coupler???????? like mine
Same I don’t know I need help plz
@@melvelazquez6847😂
@@melvelazquez6847no one has answers to that and it’s stressing me out
Wish I saw this before I chopped the hose.
My gun broke so we bought a replacement. We attached gun to existing hose but as soon as we turned water and power on the hose exploded. I thought maybe there was a kink that I didn’t see so we bought a new hose. We made sure no kinks after connecting to washer and gun. As soon as water and power were turned on hose exploded again about halfway down the hose. We can’t figure out what is wrong. Hose and gun are the model replacements for our washer that is listed online.
Thanks! Couldn't figure out how to get the HP hose off the unit.
Does anyone know the size of the O Ring with this hose? I think I need to replace mine.
I can't get the hose off the gun it's stuck
What size o rings on the pressure hose ? One is cracked on mine and leaking just gonna replace both
Good idea on grease gonna try that
Try a # 7 O-Ring on both ends.
What are the hose fittings, M22×14?...
What if the couple will not unscrew? Why did the coupler screw onto the pressure washer and now wont unscrew off?
I have the same problem but no fix yet
@@aaronwinV any luck yet? i have had the problem for about a week now (hoping to use a longer hose) but i can’t nor can anyone else unscrew that thing
🙄
@@EFLYandCOme too any luck ?????machine is still good
How do I unscrew the coupler? Its stuck on bigtime.
Same! I’m thinking maybe wd40?
My hose blew after about 3 hours use. hope the rest of the unit holds up better than the hose...
Mine doesn't seem to have any issues at the end of the hose but it still leaks water at the connection to the handle.
I had this very problem and it saved me from buying a new hose..
How you save
I m also facing this problem
Thank you for this video. Here I thought I needed to buy a new hose. I do have a question for you. Would a silicone spray be good to use on the o-ring?
how to change the fittings on the hose? black n decker
So the black cylinder that was unscrewed and pushed down is what he called a coupler. My coupler has detached from the string guard. Correct me if I'm wrong, but this coupler, when screwed on after the fitting is inserted, makes sure the fitting does not detach and "pop" out of the brass/bronze fitting on the gun. This is my problem now. I can insert the fitting, but now that my black cylinder coupler is detached, my fitting just pops/blows off from the gun fitting when I turn on the hose. How do I fix this?
It sounds like you need to go to your local Home Depot and purchase a new coupler then screw that on over the hose line.
I have a Husky HU80714.. is the hose replacement the same for this as it is for the one in the video?
What’s a good high pressure hose to replace the ryobi 1600 psi pressure washer stock hose ?
Mine is leaking from the gun to the hose
My hose has gone very hard the can't roll it up
You'd get more reviews if you fixed the original.
Hi Angus, and thanks for leaving a comment! Unfortunately, I'm not totally sure what you're referring to here. If you'd care to elaborate, we might be able to help with your question!
Never had a high pressure hose cracked, one is over 30 years old. Never had one won't unscrewed either. Ryobi is low end, not surprised they cut corners on the hoses. Don't let the hose touch the hot exhaust shield, it will burn a hole in it. I went through 5 high pressure washers. My electric one is junk with plastic pump and cracked in no time and cost more to replace the pump that buying it again. Maybe the more expensive electrics use brass pumps. Two of the gas ones have unloader problems, where the pump cycles on and off resulting in no pressure. Great Honda engines, pumps not so good. Two working fine, one on the bench for repair remaining two in the trash. Shame all the gas engines were good.
I'm pissed I have a ryobi pressure washer the pressure washer hose was trash. Bought a new braggs and Stratton hose that does not go all the way up now a new hose leaks. How can I fix this I have a ryobi pressure washer
I am having the same issue but I think if I replace O ring, it will stop leaking
@@jasonh8890 I had to buy a new trigger gun after weeks on trying 3 -4 hoses now no leaks bud.
If it were that easy I wouldn't need to watch RUclips video. My hose will not thread onto the fitting. I'm trying to figure out why.
This is not a fucking repair. Its just fucking replacing the hose and just need common sense to unplug a stuck hose
Common man you made a video about replacing a hose!? Really. Who doesnt know how to unscrew a hose. Where did you learn this at Harvard.
The idea is what to do if corrosion causes your hose to get stuck on.
Replacing a hose video... 🙄🤦♂️... those hose sucks btw, very low quality.
your video starts off with a loud knocking on the front door. listening with headphones at close to midnight, very startling. had to get a weapon and go outside and check the property. very stupid on your part.
I really hope you are a friend of his and are just joking with this comment.