Electric Blast Gates for my Woodshop + FAQ

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 43

  • @biglouie69
    @biglouie69 2 года назад +23

    Incredible! Could you be so kind as to add links to actuators, relays, and such. If you had sponsored links I would be more than happy to purchase through that. Thanks for your time and consideration

    • @iq0099
      @iq0099 8 месяцев назад

      yes, please..

  • @bityard
    @bityard 3 года назад +5

    I really liked the FAQ section at the end. More youtubers should do that, it would save them a lot of time in the comments.

  • @thunderstruck1078
    @thunderstruck1078 3 года назад +5

    OK, this is epic on so many levels!

  • @sebastiankriegerow4747
    @sebastiankriegerow4747 3 года назад +2

    Schön wieder was von dir zu sehen und zu hören. Gutes Video Danke

  • @k13ehr
    @k13ehr 3 года назад +3

    Looks like you have a glamorous assistant.

  • @louisfkoorts5590
    @louisfkoorts5590 2 года назад

    Thank you Cosmas.
    Always good to see you, "pulling something out of the hat".
    Your scarcity value is skyrocketing. 😄
    👍🏻

  • @megaprimatuskong6913
    @megaprimatuskong6913 2 года назад

    Woodworking was in my veins .
    I just want to be home again
    God Bless

  • @k13ehr
    @k13ehr 3 года назад

    It takes a good man to admit any mistakes, it also makes for a more interesting video when they do.

  • @jpmmaio
    @jpmmaio 2 года назад +3

    The neutral in the main switch is a must in this case -> eu plugs can be plugged in either way, so you will never know which one is the live. Better safe than sorry!
    Very nice work overall!

  • @OneManBandWoodworks
    @OneManBandWoodworks 2 года назад

    You are a genius and a gentleman, my answers to some of those questions would’ve been very different

  • @Techsus1
    @Techsus1 3 года назад +2

    Cosmas returns!! 💥

  • @TheFalconJetDriver
    @TheFalconJetDriver 2 года назад

    I like your answers short and too the point! 🤣🛫

  • @MorRobots
    @MorRobots 3 года назад

    Ok that tool changer is smart given the application

  • @LabFiona
    @LabFiona 3 года назад

    Modern technology at your service! Nice:-)

  • @homemadetools
    @homemadetools 2 года назад

    Nice job. We shared this video on our homemade tools forum this week :)

  • @selulancie
    @selulancie 3 года назад

    Great work with the electrical system. Very clean

  • @thecarweewoodworker8629
    @thecarweewoodworker8629 2 года назад

    Loved the ending comments

  • @Alban.B.Zimmert
    @Alban.B.Zimmert 3 года назад

    FAQ at the end is great

  • @NicoSmets
    @NicoSmets 3 года назад

    Very interesting. Thank you for sharing.

  • @julianvenn4195
    @julianvenn4195 3 года назад

    Zehr gut herr Bauer.

  • @mdftrasher
    @mdftrasher 3 года назад +4

    Well, it is a nice auto tool change cnc!
    So finding an excuse to build something is not hard ;-)

  • @Brian18741
    @Brian18741 2 года назад

    Man that is so cool 👍👍

  • @urban7862
    @urban7862 3 года назад

    Absolute genius. Who was your helper?

  • @viorsa8200
    @viorsa8200 3 года назад

    Excelente proyecto muy bien desarrollado y mejor ejecutado , pero usted es carpintero o electricista ? ,una instalación muy limpia y profesional , cómo resultado final un buen funcionamiento de las puertas de aspiración , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜

  • @TimSavage-drummer
    @TimSavage-drummer 3 года назад +5

    Nice, I have shop made blast gates, but now I have another project!
    What was the linear actuator that you used?

  • @fehlerstromalex
    @fehlerstromalex 3 года назад +3

    Kannst du die Produkte vielleicht noch in der Videobeschreibung verlinken? Vorallem wegen den Linearmotor!

  • @tkaudioservices1936
    @tkaudioservices1936 2 года назад +1

    I am also interested in knowing which actuator you used. I looked through the comments but couldn’t find it.

  • @medistat9
    @medistat9 3 месяца назад

    Why not just use a long-stroke relay that is energised whenever the machine is turned on and lets go when the machine is turned off - use the same power as feeds the machines motor. If insufficient stroke to open the gate then use a more powerful relay and the principle of levers. I have some 2A @ 230v relays here with 3.5" strokes.

  • @LostWhits
    @LostWhits 3 года назад

    I love the multi collet CNC machine too many out there are single collet and need you to manually change the bit each time.

  • @peterkuhlmann426
    @peterkuhlmann426 3 года назад +2

    FAQ: warum war es so ruhig die letzten Monate? Ist mir bei einigen RUclipsrn aufgefallen. BTW schönes Projekt 👌🏻

  • @maka3080
    @maka3080 3 года назад

    Great

  • @DucPhan20
    @DucPhan20 2 года назад

    omg, they have components that can just snap in like that?? def. don't have anything like that in the US do they?

  • @srmofoable
    @srmofoable 3 года назад

    I often times feel like I'm just buying tools so I can customize other tools that I bought to make other tools....
    .... you see that behavior a lot in the 3d printer world

  • @jagmep8479
    @jagmep8479 2 года назад +2

    WHERES THE PARTS LIST !!!

  • @MultiKlompen
    @MultiKlompen 3 года назад

    Someone is helping you?
    Who is it?
    I always though, that you can do it all on your own ... now i know ... :-()

  • @bnssoftware3292
    @bnssoftware3292 Год назад

    Nice but kind of useless without links to the products used

  • @AntiThesis10125
    @AntiThesis10125 2 года назад

    Actuators are expensive!

  • @brucemillar3015
    @brucemillar3015 3 года назад

    Nice solution... Boy, your commenters are really picky.

  • @MultiKlompen
    @MultiKlompen 3 года назад

    ...

  • @TheFalconJetDriver
    @TheFalconJetDriver 2 года назад +1

    What actuators did you use? Do you have the specification’s on the actuators? Thanks