I know a lot of you are wondering why not a Hemi... and I’m sure some people are mad about a Gm engine for some reason.. It comes down to something very simple. Hemi swaps are more expensive. There are pros and cons to both engines, as well as the great engine debate. I’m not getting into that... A DIY budget friendly engine swap fits my needs perfectly. And in the end, horsepower, torque and loud engine noises are all I really care about.
JK Gear and Gadgets oh and btw it’s your Jeep to build how you want to build it. In my mind this series will be relatable for most people out there including myself. Can’t wait to see the final project.
JK Gear and Gadgets, I would argue that while Hemi-swap may be more expensive on up-front costs you could prob find a used 5.7 out of a Ram 1500 for a lot less & end up saving more on the back end b/c of fewer electrical complications. Either way, new to the channel but I’m gonna enjoy the journey with y’all. Cheers & God bless!
????? Then why did you fix the exhaust with the TJ just to swap it to a V-8? I personally would just build up the 4.0 to 4.6, Banks turbo kit, Edelbrock head, and swap over to a 5-speed.
Did a 6.2 Swap in my JKU this year. Highly recommend it. RPM Extreme did a fantastic job with the kit provided and with tuning. No dummy lights, all systems function as normal.
Put the same engine Transmission combo in my Tj that’s in my profile pic mine was from a 04 and did a cam and springs Novak radiator and Holley Terminator X Max for the DBW and trans control needs about 5-6 wires to hookup and she’s ready to fire up
Took mine to Motech in Vegas getting a L86 with a 8 speed. Then dropping a 2.9 l whipple supercharger added 72 inch dynotack 60s and a beefed up atlas transfer case and game changer 4.5 lift. 2 more weeks I finally get to get it
It's a ls based engine. Clean off the dirt, reseal, and send it. DON'T REPLACE BEARINGS IF THEY ARE NOT DAMAGED. GM built this engine to last. Commonly get over 300k on a 5.3l.
I have a 5.7 hemi and a 6 speed manual GETRAG 238 sitting in garage to go in my 2007 jku rubicon. Best part is my rubicon transfer case bolts right to the getrag so get to keep a 6 speed trans and my rubicon transfer case gearing.
Glad to see the LM7 going in the LJ. You need more than that in the heavy JK. The 4L60 can be made into a good reliable transmission in the LJ. The 6.0 is minimum in a heavy JK. Plus I’d recommend going with the 6L80 in the JK as it’s the hidden hero of the swap. The 4.02:1 first gear is awesome. I have several videos on my channel of my 6.2/6L80 LS swap into my 2011 JKUR. Good luck. Mike
I've had the hemi swap in a 2005 LJ Rubicon, had heating issues, have a Banks turbo in 06 LJ Rubicon now, still not there. Now I have a 4.6 Golan sitting in crate, broken in on dyno and ready for install. We'll give that a try next.100% bolt in. I like that.
In process of ordering parts for a (L96) Gen IV 6.0 w/ 6L80, using MoTech system. Will end up around ~350 Hp and ~380 Torque. Cheaper then buying new JL.
James Brown I will be helping my mechanic. I think with MoTech Kit, it should be plug and play. Mechanic will help with the tune portion for sure. We expect 2 full 10 hour days to get it in and maybe another day to tune. Must live in a emission friendly state to put L96 engine in, which I do.
The 4.0 is a dog. Building it to make LS power would cost as much as a swap and sacrifice reliability. LS swaps are no brainers. Affordable reliable power.
Good idea on picking the LJ!! I went with a R2.8 Cummins in my TJ and 300 ft lbs is the sweet spot IMO for any Jeep. I like the Cummins low end torque and fuel economy. My wife and I have discussed the Gladiator, but after running so much diesel stuff off-road, just can't go back to gas when going off-road. It kills me with Jeep, the options should be a utilitarian diesel and then something that's really focused on high HP, but they didn't ask me, I just mod them for what I want. I've got a ZJ with a 5.2 V8 and it's so much easier on the highway than the TJ with a 4.0.
I want to do a 6.4 Hemi swap in my 2020 Gladiator Rubicon. They should have offered it with a V8 from the factory... The 5.7 Hemi at a minimum, for the Rubicon and Max Tow models.
@@djuell01 Then mine will be getting traded in early for a V8 JTR optioned exactly like mine currently is... I love the JTR, just needs more power for a truck, and higher tow ratings (8,500 lbs. would be nice for a Rubicon) if they increased the spring rate, and reinforced the frame some, it would be a true competitor to the 1/2-ton trucks, and the best mid-sized truck on the market.
@@allantilley3716 Eh, it's possible. I doubt they'll do a 6.4 because it likely won't pass safety, but I could see them doing the 5.7. Really we'll know what's up when the new Dakota drops. Being the only midsize with a V8 on the market was the old Dakota's niche, so I can see FCA trying to cash in on it. FCA is also pretty well known for sharing parts, specifically engines across their various brands so it'll could roll down to the JT or JL in the future.
People have been seeing the 6.2 Hemi concept wrangler out in the wild testing, and there is a rumor Jeep has made 30+ examples of that concept for testing. If that is true, it is pretty promising that we will get the v8 to keep people from getting Broncos.
The 5.3 will not give you the "WOW" factor most are looking for. Go for 5.7 or 6.0. JMO The wire harness runs $1500. So GO BIG! Good choice picking the LJ for the swap.
LJ's are nice, just slow. Same 4.0 6i. I have this engine in my 06 TJ. I wouldn't mind a 5.3 in my rig! So I'll be watching this build! Thanks for the video! 🇺🇸
First of all you need to make that engine stand a 4 point instead of the tip over prone 3 point. Why’d anyone get mad about a GM in a Jeep, how many were transplanted into the older ones like the CJ, etc. keep up the great work and enjoying what you want to do.
Very interesting and most definitely agree . I'm old school V-8 401 was great motor in 78 Iternational Scout 2 and transmission . Tow it off road for heavy body vehicle course didn't have all new technology worry about. Only problem was coil besides that ran perfectly. Be interesting series to watch 💪🙂👍
You can always put different transmissions behind any Chevy engine it doesn’t just have to be that crappy 4L60 you can do basically any transmission you want
Check out Motech or lswrangler for LS swaps on the JK. I did a 6.2L and a 6L80 in my JKU and it has been great and I don’t have near the weight as you. Excited to see.
I just sold a YJ with an LS six and 4L65 tons of fun,4l65 was a pain in the ass I have a JKU with an LS3 and a 6L80 and tons, Clayton long arm with 39s it’s awesome
I got all my stuff from John at Overland performance his number is 225-304-6288was no harder than a sbc into a cj, there’s four wires you have to cut and splice in the dash that was the hardest part, I converted from a stick to a 6L80 that wasn’t very hard either you do have to change the detent for the drive position everything in my JK works including tap shift cruise control and everything else, l used the biggest radiator they have with the Camaro fan it keeps it cool almost always when I really pound on it in the sand it gets a little warm and I mean playing on big hills for 20 or 30 minutes then I go park for a while
@@fixmeuphandyman it must a badass f100, I wanted to go with a cummins in my 78 bronco but the adapter items or mods were more expensive than the cummins itself ao I just stayed with the 400m 😅
Love it. You owe me a video on your gear selection of the JT though. You never went into why you chose 5.13 over 4.88. Also, curious how you like it now after some miles. Getting ready to re-gear my JL and keep going back and forth on ratios.
I would think that the 4.6 stroker would be easier and cheaper if you consider work hours. But hey that’s a short series compared to the massive undertaking you guys are doing! I look forward to following the swap though it’s gotta be entertaining!
You would save thousands of dollars and a hundred hours of labor by keeping the 4.0 and stroking it to a 4.6. You end up with an engine that makes similar power and torque to the 5.3, at a much lower RPM, which is what you want off road. You also don't end up with a cobbled up mess, piggybacked ecu's, overheating problems, exhaust clearance issues , etc.... This is coming from a guy who bought my TJ with the SOLE intention of LS swapping it. I have V8 swapped dozens of rigs, and have a complete LQ4 6.0 and LC9 aluminum 5.3 sitting in my shop ready to swap into something.... After building 3 jeep inline strokers , I'll never waste the time and money LS swapping a TJ. If I was going to do a V8 I'd do a hemi so it would be almost plug n play with no piggyback or stand alone computer BS.
The Gladiator should have a 5.7L Hemi as an Option just like the Grand Cherokee which I own a 2020 Hemi powered Trailhawk GC and I hope that 2021 will bring the 5.7L to Gladiator!
Oh my god I am so glad you guys are doing this on both jeeps so excited very cool. I have a 2010 3.8 ,6 speed manual totally pumped love you guys rock on
Awesome video! Just got my tires (already received), FabFours Lifestyle bumper, badlands apex 12000 winch (in garage), black rhino wheels... and a lot of other stuff for my Gladiator!!! Super excited.
This is so cool guy's , I cant wait . Being the owner of both a TJ and JK both of these builds are on my bucket list so I will be able to learn a lot from you on both builds . Take care and be safe .
Novak and advanced adapter are goin to be your friend... it'll make it easier and faster to do that. I've been building every part for my xj 5.3 swap with a 4l80e
As an Aussie who just bought his 1st 4x4 and 1st Jeep, ‘10 JKU, i love your channel and video’s! Very informative.. can i ask about the overhead panel in your JKU, where i can get one etc?
I have done a fair number of motor swaps on jeep JKs.. I would never do LS again. SO many issues. You want a through and through great quality of life motor and simple swap, get a hemi. There are many reasons every shop is swapping from doing LS to Hemi. lol
nah, those are old heavy lumps. I would swap a bmw M57 engine. Inline 6 Twin turbo diesel. 286Hp, 580nm. Can be tuned to over 400hp and 800nm. Revs like a petrol engine, goes like hell. I have a friend that has this engine in his patrol and it is a rocketship.
Yesss! I have an LJ with an automatic and I was hoping that you would take on this project on when you hinted at it. You two can do anything... and are very fun to watch. I have been contemplating the same thing ever since I started my build. I am looking forward to this series. 5k right? I am holding you to it :)
Quick Question: What are those center tire hub things you turn at 14:57? If they are tire deflators, I will definitely look into getting a set! ALso, I just got mt 2015 JK 2 Door last Sunday. Already infatuated with it. I've been watching a lot of your content and I like it. I like how you let people know that this specific mod or this part works well for you or doesn't work for your plans. I see it so many times that people praise an item as "Must Have" and it really ain't worth it.
I like to see a price at the end of the series. Ive watched a few ls swap tj videos and it seems to cost them around 10k cause all the small hiden things start adding up. This is exactly what i want to do to my 04 tj but i dont want to get started with 5k and get stuck half way done and can no longer drive the jeep
$8k for the JK 6.0 swap? That’s very ambitious considering the Motech kit starts at $5k without additions like the upgraded radiator. Will you miss the manual trans? Can’t wait to see how it goes!
I have a quick question? I have a 2015 jk. I just changed my thermostat, lower hose, temperature sensor, radiator cap and coolant flush. I curious to know what temperature does your jk normally run. My jk is running at 217 to 224 degrees. It is lifted and I have 35''s. What temp does yours have. I don't have a hood loover. I'm interested in putting one on in the Future. Thanks, great channel.
@@JKGearandGadgets thank you so so much for replying to me and i am new to the subscription on RUclips and love your videos and builds!!!! Again thank you so much!!
Man i already knew right of the bat he was gonna put it in the jk but at the same time i had a dumb little feeling that he was gonna put it on the lj and i was like yup hes gonna put it in the lj when he said it was a 5.3 especially with the 4l60 cause i mean its a crappy combo but when you put it on a lightweight vehicle you got a awesome combo at that :D Also welcome to Texas Guys :D
Love your channels! Question, I’m going to do do an LS swap on either an LJ which I love or a 2007 4dr Unlimited. I like longer wheelbase thus it’s between the LJ or JK Unlimited. If you could only have one of these for the LS swap which would you pick and why? Need your wisdom…
If you have any questions you should ask Jerry, his channel name is BullshitKorner. He just finished this exact swap. He would have some good pointers on what to and not to do.
Not sure if I missed it but do you plan on keeping the manual in the JK or going for an automatic swap as well. Always felt the 6 speed in my 07 shifted like garbage. Looking forward to both of these swaps!
Wow, cool project, but your making my head spin with taking this on in your garage. good luck! you can get a Hamburger's supercharger installed for about $6k. sorry if I'm not helping the cause. ;-)
If you're going to V8 swap the JK, why not a Hemi? Keep it in the family, plus the Hemi has plenty of HP for your JK. (stock 5.7) Everybody and their brother does LS swaps... Just sayin'.
I know a lot of you are wondering why not a Hemi... and I’m sure some people are mad about a Gm engine for some reason..
It comes down to something very simple. Hemi swaps are more expensive. There are pros and cons to both engines, as well as the great engine debate. I’m not getting into that...
A DIY budget friendly engine swap fits my needs perfectly. And in the end, horsepower, torque and loud engine noises are all I really care about.
JK Gear and Gadgets oh and btw it’s your Jeep to build how you want to build it. In my mind this series will be relatable for most people out there including myself. Can’t wait to see the final project.
JK Gear and Gadgets, I would argue that while Hemi-swap may be more expensive on up-front costs you could prob find a used 5.7 out of a Ram 1500 for a lot less & end up saving more on the back end b/c of fewer electrical complications. Either way, new to the channel but I’m gonna enjoy the journey with y’all. Cheers & God bless!
where exactly do u live in VA... and what trails would u recommend
????? Then why did you fix the exhaust with the TJ just to swap it to a V-8?
I personally would just build up the 4.0 to 4.6, Banks turbo kit, Edelbrock head, and swap over to a 5-speed.
i was watching an older vid and u said u lived in VA but it looks like u moved sorry i’m new just started watching
FINALLY! Let's get this project rolling!!!
Haha! Happy for you. I was like, yea yea yea, we get it. You’re putting it in the jk. But No! So glad to see y’all given the LJ some love!
On my hemi swap I used Hotwire Auto for the harness. Flawless harness and high quality.
Which Jeep needs a v8?? All of them!!! 😁
Did a 6.2 Swap in my JKU this year. Highly recommend it. RPM Extreme did a fantastic job with the kit provided and with tuning. No dummy lights, all systems function as normal.
TJ owner here I’ll be following this !! You two rock 🤟🏻
Put the same engine Transmission combo in my Tj that’s in my profile pic mine was from a 04 and did a cam and springs Novak radiator and Holley Terminator X Max for the DBW and trans control needs about 5-6 wires to hookup and she’s ready to fire up
Took mine to Motech in Vegas getting a L86 with a 8 speed. Then dropping a 2.9 l whipple supercharger added 72 inch dynotack 60s and a beefed up atlas transfer case and game changer 4.5 lift. 2 more weeks I finally get to get it
It's a ls based engine. Clean off the dirt, reseal, and send it. DON'T REPLACE BEARINGS IF THEY ARE NOT DAMAGED. GM built this engine to last. Commonly get over 300k on a 5.3l.
I put a 5.3 in my 04 TJ. You will absolutely love the final result. Lot of fun to drive and makes it quite the head turner.
I have a 5.7 hemi and a 6 speed manual GETRAG 238 sitting in garage to go in my 2007 jku rubicon. Best part is my rubicon transfer case bolts right to the getrag so get to keep a 6 speed trans and my rubicon transfer case gearing.
Glad to see the LM7 going in the LJ. You need more than that in the heavy JK. The 4L60 can be made into a good reliable transmission in the LJ.
The 6.0 is minimum in a heavy JK. Plus I’d recommend going with the 6L80 in the JK as it’s the hidden hero of the swap. The 4.02:1 first gear is awesome.
I have several videos on my channel of my 6.2/6L80 LS swap into my 2011 JKUR.
Good luck.
Mike
before yall pull the Straight 6 you should ebay turbo it and just send 40lbs of boost through it lmao
I've had the hemi swap in a 2005 LJ Rubicon, had heating issues, have a Banks turbo in 06 LJ Rubicon now, still not there. Now I have a 4.6 Golan sitting in crate, broken in on dyno and ready for install. We'll give that a try next.100% bolt in. I like that.
TriggerHapySheep that might pay for the swap from the views lol
Money like a fart, here one moment, then never remaindered that it ever existed to begin with.
Also, you could try to hook up with a supercharger company. Try RIPP Supercharger. 363 RWHP on 38''/350 torque
Awesome happy for your upgrade. Put a 6.2 hellcat in the JK.
In process of ordering parts for a (L96) Gen IV 6.0 w/ 6L80, using MoTech system. Will end up around ~350 Hp and ~380 Torque. Cheaper then buying new JL.
Will you be performing the swap? This is the combo that I am leaning towards.
James Brown I will be helping my mechanic. I think with MoTech Kit, it should be plug and play. Mechanic will help with the tune portion for sure. We expect 2 full 10 hour days to get it in and maybe another day to tune. Must live in a emission friendly state to put L96 engine in, which I do.
Climb High I’m leaning towards the Motech builders kit for my ‘12 JKU. Hope it goes very smoothly for you.
I would love the in depthness of the actual swap part as specific as your locker install videos
That would be sick to actually see everything
I had a ZJ with 4.0 for 19 years and over 300,000 documented miles; the head had never been off! ? Why not build your 4.0 or stroke it to 4.6?
I wouldn't get rid of the 4.0, the chevy ls based engine is also very good but better to have two good engines those chrysler 3.6 suck
@Finn Malloy 3.8 is not based out of the 3.6?
The 4.0 is a dog. Building it to make LS power would cost as much as a swap and sacrifice reliability. LS swaps are no brainers. Affordable reliable power.
@@polarjeep04 You're not wrong - my 4.0 had grunt but no oomf! Always wanted a 5.9/360!
Good idea on picking the LJ!! I went with a R2.8 Cummins in my TJ and 300 ft lbs is the sweet spot IMO for any Jeep. I like the Cummins low end torque and fuel economy. My wife and I have discussed the Gladiator, but after running so much diesel stuff off-road, just can't go back to gas when going off-road.
It kills me with Jeep, the options should be a utilitarian diesel and then something that's really focused on high HP, but they didn't ask me, I just mod them for what I want. I've got a ZJ with a 5.2 V8 and it's so much easier on the highway than the TJ with a 4.0.
I want to do a 6.4 Hemi swap in my 2020 Gladiator Rubicon. They should have offered it with a V8 from the factory... The 5.7 Hemi at a minimum, for the Rubicon and Max Tow models.
The Hemi's will be in next years models, it is the 80th anniversary year so perfect timing.
@@djuell01 Then mine will be getting traded in early for a V8 JTR optioned exactly like mine currently is... I love the JTR, just needs more power for a truck, and higher tow ratings (8,500 lbs. would be nice for a Rubicon) if they increased the spring rate, and reinforced the frame some, it would be a true competitor to the 1/2-ton trucks, and the best mid-sized truck on the market.
Dustin Juell no they won’t be
@@allantilley3716 Eh, it's possible. I doubt they'll do a 6.4 because it likely won't pass safety, but I could see them doing the 5.7. Really we'll know what's up when the new Dakota drops. Being the only midsize with a V8 on the market was the old Dakota's niche, so I can see FCA trying to cash in on it. FCA is also pretty well known for sharing parts, specifically engines across their various brands so it'll could roll down to the JT or JL in the future.
People have been seeing the 6.2 Hemi concept wrangler out in the wild testing, and there is a rumor Jeep has made 30+ examples of that concept for testing. If that is true, it is pretty promising that we will get the v8 to keep people from getting Broncos.
The 5.3 will not give you the "WOW" factor most are looking for. Go for 5.7 or 6.0. JMO The wire harness runs $1500. So GO BIG! Good choice picking the LJ for the swap.
Loved the 1-ton swaps on the JK. Can't wait to see the LJ engine swap and eventually the JK engine swap!
LJ's are nice, just slow. Same 4.0 6i. I have this engine in my 06 TJ. I wouldn't mind a 5.3 in my rig! So I'll be watching this build!
Thanks for the video! 🇺🇸
Wouldn't a hemi from chrysler be easier to install in the jk and you can get similar numbers from the 5.7
Just blew my motor on my 17’ JK 2 weeks ago so you betcha I’ll be watching every minute. Thanks!
First of all you need to make that engine stand a 4 point instead of the tip over prone 3 point. Why’d anyone get mad about a GM in a Jeep, how many were transplanted into the older ones like the CJ, etc. keep up the great work and enjoying what you want to do.
Hello. Here is Korea.
I am your old fan.
The Gladiator officially started selling today.
Your video is very popular in Korea.
Very interesting and most definitely agree . I'm old school V-8 401 was great motor in 78 Iternational Scout 2 and transmission . Tow it off road for heavy body vehicle course didn't have all new technology worry about. Only problem was coil besides that ran perfectly. Be interesting series to watch 💪🙂👍
You can always put different transmissions behind any Chevy engine it doesn’t just have to be that crappy 4L60 you can do basically any transmission you want
Check out Motech or lswrangler for LS swaps on the JK. I did a 6.2L and a 6L80 in my JKU and it has been great and I don’t have near the weight as you. Excited to see.
I just sold a YJ with an LS six and 4L65 tons of fun,4l65 was a pain in the ass I have a JKU with an LS3 and a 6L80 and tons, Clayton long arm with 39s it’s awesome
What kit was used for the LS3?
I got all my stuff from John at Overland performance his number is 225-304-6288was no harder than a sbc into a cj, there’s four wires you have to cut and splice in the dash that was the hardest part, I converted from a stick to a 6L80 that wasn’t very hard either you do have to change the detent for the drive position everything in my JK works including tap shift cruise control and everything else, l used the biggest radiator they have with the Camaro fan it keeps it cool almost always when I really pound on it in the sand it gets a little warm and I mean playing on big hills for 20 or 30 minutes then I go park for a while
I’m a YJ guy and I have my heart set on a Coyote swap. Something super unique and as far as I know only been done twice
Coyotes are not cheap
John Keyno I know 😕. I think I’m going to buy a whole truck and get a harness from Power By the Hour.
@@Keyno77 Same reason why I LS swapped my 69 ford F100 and strayed away from the DOHC coyote. Plus it's way easier to work on.
@@austincorbiniv I think the coyote is better engine though, I had not heard from pbh I just checked their website good to know they exist.
@@fixmeuphandyman it must a badass f100, I wanted to go with a cummins in my 78 bronco but the adapter items or mods were more expensive than the cummins itself ao I just stayed with the 400m 😅
I saw that V8 sitting on the pallet with the trans. and thought hmmm, which one. Then in one of the videos Casey mentioned now I need and LS. Bingo!!
Love it. You owe me a video on your gear selection of the JT though. You never went into why you chose 5.13 over 4.88. Also, curious how you like it now after some miles. Getting ready to re-gear my JL and keep going back and forth on ratios.
*At the end of the JK V8 swap* “hey guys welcome back to
Jk gears and gadgets, today! We are gonna hell cat swap the gladiator” 😂😂
This is such great stuff!
Nate (DirtLifeStyle) has a Jetta TDI
You're going with this beast
Always good info no matter what!
Nate @dirtlifestyle has a awesome channel been watching him since bleepin jeep start
Its was great to meet you guys. Glad you came out and played with us. Sorry i had to cut my day short. Hopefully we can do it again soon.
Yes it was a ton of fun.... you should have drove my buggy....hopefully soon!
I love this idea. Price, parts and simplicity. Smart move. 05 Rubi TJ for life
I would think that the 4.6 stroker would be easier and cheaper if you consider work hours. But hey that’s a short series compared to the massive undertaking you guys are doing! I look forward to following the swap though it’s gotta be entertaining!
As soon as I saw the 4L60E transmission, I knew it was going into the LJ... ain’t no way in hell you were going to go from a manual to an auto.
You would save thousands of dollars and a hundred hours of labor by keeping the 4.0 and stroking it to a 4.6. You end up with an engine that makes similar power and torque to the 5.3, at a much lower RPM, which is what you want off road. You also don't end up with a cobbled up mess, piggybacked ecu's, overheating problems, exhaust clearance issues , etc....
This is coming from a guy who bought my TJ with the SOLE intention of LS swapping it. I have V8 swapped dozens of rigs, and have a complete LQ4 6.0 and LC9 aluminum 5.3 sitting in my shop ready to swap into something....
After building 3 jeep inline strokers , I'll never waste the time and money LS swapping a TJ. If I was going to do a V8 I'd do a hemi so it would be almost plug n play with no piggyback or stand alone computer BS.
The Gladiator should have a 5.7L Hemi as an Option just like the Grand Cherokee which I own a 2020 Hemi powered Trailhawk GC and I hope that 2021 will bring the 5.7L to Gladiator!
Make sure you add a upgraded fuel pump to that swap sure will help. There are so many kits to help with that JK when you get to it.
I put a turbo on my Jeep for 6000 and it is night and day different. I thought about doing a swap but it was cheaper doing the turbo.
The LJ is pretty computer controlled too. Excited for this though. I hate the 42rle in my lj as well
Oh my god I am so glad you guys are doing this on both jeeps so excited very cool. I have a 2010 3.8 ,6 speed manual totally pumped love you guys rock on
6.4L Hemi in the JK🤩
Awesome video! Just got my tires (already received), FabFours Lifestyle bumper, badlands apex 12000 winch (in garage), black rhino wheels... and a lot of other stuff for my Gladiator!!! Super excited.
I would have turbocharged that 4.0
Your JK needs more power like I said in the past because of 40s tons but good Idea ya are doing them
you could put a chip a air cleaner and exhaust and add 50 to the rubicon
This is so cool guy's , I cant wait . Being the owner of both a TJ and JK both of these builds are on my bucket list so I will be able to learn a lot from you on both builds . Take care and be safe .
Novak and advanced adapter are goin to be your friend... it'll make it easier and faster to do that. I've been building every part for my xj 5.3 swap with a 4l80e
As an Aussie who just bought his 1st 4x4 and 1st Jeep, ‘10 JKU, i love your channel and video’s! Very informative.. can i ask about the overhead panel in your JKU, where i can get one etc?
It is from Molle platform solutions
@@JKGearandGadgets thanks for the reply guy's! Hopefully they're available down here
You couldnt put that motor in the jk anyway. The production of that motor stopped in 07 so the jk wouldnt be compliant since it was built in 2010
Doesnt matter where he lives now
LS FTW!!!!! Peeped that puppy last video, thank god you didn’t keep us waiting!!! Can’t wait to follow along!🙌🏼
I have the same set up on my YJ. You guys are gonna love it.
You should at least have a few more jeeps. Nice hand.
Motortrend put a 5.9 cummins in a JK. This reminded me of that. Excited to see what happens
I knew it was the LJ as soon as you said you sold the transfer case for $100. Lol
I have done a fair number of motor swaps on jeep JKs.. I would never do LS again. SO many issues. You want a through and through great quality of life motor and simple swap, get a hemi. There are many reasons every shop is swapping from doing LS to Hemi. lol
Supercharge the Gladiator !! Really needs another 50 to 100 hP.
Go to Aggressive Krawlers in Myrtle Beach. They do hemi swaps and it's warrantied
For around 25-35k right?
The gladiator needs a Cummins
nah, those are old heavy lumps. I would swap a bmw M57 engine.
Inline 6 Twin turbo diesel. 286Hp, 580nm. Can be tuned to over 400hp and 800nm.
Revs like a petrol engine, goes like hell. I have a friend that has this engine in his patrol and it is a rocketship.
@Mega you don’t put a foreign
engine in an American vehicle it’s just not right lol
@Mega and I also meant for torque not horsepower
Yeah the 5.3 is heavy and isn't enough for the JKU.
You want a 7.0 ;)
Or 6.2L at least alum blocks are light
LM7 for the LJ, LS for the JK and HEMI for the JT. Win, Win aanndd WIN! Much love from Louisiana
Dan Hartman “ I can dream about you”. The guy Looks exactly like you but with a sick 80’s fade.
Yesss! I have an LJ with an automatic and I was hoping that you would take on this project on when you hinted at it. You two can do anything... and are very fun to watch. I have been contemplating the same thing ever since I started my build. I am looking forward to this series. 5k right? I am holding you to it :)
Can't help but wonder how the neighbors like the jeep repair shop in the neighborhood.
Quick Question: What are those center tire hub things you turn at 14:57? If they are tire deflators, I will definitely look into getting a set!
ALso, I just got mt 2015 JK 2 Door last Sunday. Already infatuated with it. I've been watching a lot of your content and I like it. I like how you let people know that this specific mod or this part works well for you or doesn't work for your plans. I see it so many times that people praise an item as "Must Have" and it really ain't worth it.
Solid plan! These will be two good video series. Good luck!
Lol I picked a good day to talk to you about this.
Have a 1999 tj that just upgraded, dana 60 rear, e locker, 39's bfg's. Want that V8 next and like your budget plans. Live in Orange County Ca.
Hey guys I know a Mechanic shop in Brownsville Texas that will probably get that done for around six grand
You can put a Ripp Supercharger in the 3.6 that is the gladiator and they are some +100hp.
I like to see a price at the end of the series. Ive watched a few ls swap tj videos and it seems to cost them around 10k cause all the small hiden things start adding up. This is exactly what i want to do to my 04 tj but i dont want to get started with 5k and get stuck half way done and can no longer drive the jeep
$8k for the JK 6.0 swap? That’s very ambitious considering the Motech kit starts at $5k without additions like the upgraded radiator. Will you miss the manual trans? Can’t wait to see how it goes!
Gee Cassie getting all touchy 😜
If yall ever wanna go hit the trails give us a ring
Maybe you should get in touch with texas speed for some parts, looks like they like helping and sponsoring builds on youtube.
man you said exactly what i was gonna say :D
7:35 your welcome guys
We installed the SSL Double Din last week, but my wife said no on the V8 Swap. That's OK we're trying to buy a new house, too...
What great looking couple. 🇺🇸
Good to see the Crocs made it to Texas.
I have a quick question? I have a 2015 jk. I just changed my thermostat, lower hose, temperature sensor, radiator cap and coolant flush. I curious to know what temperature does your jk normally run. My jk is running at 217 to 224 degrees. It is lifted and I have 35''s. What temp does yours have. I don't have a hood loover. I'm interested in putting one on in the Future. Thanks, great channel.
What bumper you running on the gladiator!?That bumper is so simple yet so appealing and I love the look and style!!!
It’s from Barnes4WD. They also offer a channel discount, code is JKgear
@@JKGearandGadgets thank you so so much for replying to me and i am new to the subscription on RUclips and love your videos and builds!!!! Again thank you so much!!
Man i already knew right of the bat he was gonna put it in the jk but at the same time i had a dumb little feeling that he was gonna put it on the lj and i was like yup hes gonna put it in the lj when he said it was a 5.3 especially with the 4l60 cause i mean its a crappy combo but when you put it on a lightweight vehicle you got a awesome combo at that :D
Also welcome to Texas Guys :D
Love your channels! Question, I’m going to do do an LS swap on either an LJ which I love or a 2007 4dr Unlimited. I like longer wheelbase thus it’s between the LJ or JK Unlimited. If you could only have one of these for the LS swap which would you pick and why? Need your wisdom…
All Wranglers with the 3.6 have 285/260
Where is that little area at the 15 minute mark? There aren’t that many places to go here in south Texas.
Should of went for the Cummins swap in the JT haha.
Love your videos, your wife is always onboard, awesome! Thanks!
I’m doing a 5.3 with the nsg370 6 speed in my tj bought 2 parts from Novak.
So why not a hemi? Wouldn't it make the computer and electronics work easier?
I lovvee my ls swap Tacoma.
Looking forward to seeing this video series. 👍🏼
If you have any questions you should ask Jerry, his channel name is BullshitKorner. He just finished this exact swap. He would have some good pointers on what to and not to do.
Not sure if I missed it but do you plan on keeping the manual in the JK or going for an automatic swap as well. Always felt the 6 speed in my 07 shifted like garbage. Looking forward to both of these swaps!
Swap to an auto for sure
... oh c'mon, an LS swap?
A GM motor in a Jeep???
The gods will be cringing, in the valley of Valhalla...
Wow, cool project, but your making my head spin with taking this on in your garage. good luck! you can get a Hamburger's supercharger installed for about $6k. sorry if I'm not helping the cause. ;-)
If you're going to V8 swap the JK, why not a Hemi? Keep it in the family, plus the Hemi has plenty of HP for your JK. (stock 5.7) Everybody and their brother does LS swaps... Just sayin'.
Are you planning on keeping the Jeeps Street Legal? And if so how are you going to manage that with EPA engine swap regulations?
The engine is a 2006, The LJ is a 2005, so that’s fine.