Want more shop talk! Love the brake pads on the Pro still on the stock pads, they last forever even in clay mud! Or maybe i just don’t use ‘em enough. Wish y’all had the 3 spring on the early year models, helps keep the tender spring from clocking out of position. That’s my only issue with the Pro XP is wear on the rear shock body
Same here, talked to my dealer and polaris and they did nothing about it. 2 Months later they announce a new spring package.....so they acknowledged by doing that there is an issue.
What a great series! Love my ProXP4 and being able to learn a little more about what the thought processes were behind the engineering. CanAm is so far behind in marketing and tech, it's crazy. Keep it up, man!
Wondering if you could touch on the excessive heat going through the center console section, one big issue we have is useing the cup holders the cups get HOT after a bit. Is there anything you have come up with to correct this issue? Other then that we love our Rzr XP Pro
You could try adding some heat shielding in the tunnel around the cup holders and on the holders it’s self. All the coolant lines run down through the center console to the radiators in the front. There is not much you can do other than trying to deflect the heat.
Pat/ Polaris… can we expect a ride command plus add on for our ride command machines Iam only seeing 2023 models it will work with .. what about all of use with 2022 models ??
Is there a H.P. upgrade for the 110 h.p. units? I.e. 2021 xp 1000 Premium. Also, I’d like to install bigger/taller wheels/tires. Any suggestions on that?
I Wana hear about the bolts that hold on the suspension .. are they the wrong bolts in all your machines. Like a company out there is telling everyone? Or are they they a shear point like I have seen on many machines that come in my shop that hit something and break the a-arm bolts and didn't hurt the mounts.. I put a bolt kit in one of mine and bent my frame when I hit a stump I didn't get my son to stop in time and he hit it and bent the a-arm and broke a lower bolt .. the new a-arm went right on his machine and mine with stronger bolts bent the mount and pushed in the frame at the mount location. So I put the stock bolts back in.. This is a hot topic right now in the UTV world and I think Polaris needs to address this as soon as possible
More shop talk in relation to Pro xp. Great job!
Brakes are next level on all wide open models. Super impressed with the brakes gotta say. Triple pistons up front. Soo good
Just picked up a 2022 Pro XP Sport!! It’s amazing, I’m trying to learn all I can, these videos are awesome. Thanks!!!
Want more shop talk! Love the brake pads on the Pro still on the stock pads, they last forever even in clay mud! Or maybe i just don’t use ‘em enough. Wish y’all had the 3 spring on the early year models, helps keep the tender spring from clocking out of position. That’s my only issue with the Pro XP is wear on the rear shock body
Same here, talked to my dealer and polaris and they did nothing about it. 2 Months later they announce a new spring package.....so they acknowledged by doing that there is an issue.
Wanna see closer look on chassis and all the gussets Polaris puts in at factory making this frame strong 💪
What a great series! Love my ProXP4 and being able to learn a little more about what the thought processes were behind the engineering. CanAm is so far behind in marketing and tech, it's crazy. Keep it up, man!
Sick video on the PRO XP!
Love to have one of these beast
I can’t lie I slipped and almost hit a tree @50 mph and boy does those brakes work 😂😂😂stopped on a dime 😁🤙
Love me pro
Wondering if you could touch on the excessive heat going through the center console section, one big issue we have is useing the cup holders the cups get HOT after a bit. Is there anything you have come up with to correct this issue? Other then that we love our Rzr XP Pro
You could try adding some heat shielding in the tunnel around the cup holders and on the holders it’s self. All the coolant lines run down through the center console to the radiators in the front. There is not much you can do other than trying to deflect the heat.
Pat/ Polaris… can we expect a ride command plus add on for our ride command machines Iam only seeing 2023 models it will work with .. what about all of use with 2022 models ??
😎👍
Is there a H.P. upgrade for the 110 h.p. units? I.e. 2021 xp 1000 Premium. Also, I’d like to install bigger/taller wheels/tires. Any suggestions on that?
So nice but will sell better with some better colours I think
Could you get the camera person to turn on stabilization, I hate videos where it seems like I'm drunk...
Why 6” wide wheels in the front and 7” in the rear?
I Wana hear about the bolts that hold on the suspension .. are they the wrong bolts in all your machines. Like a company out there is telling everyone? Or are they they a shear point like I have seen on many machines that come in my shop that hit something and break the a-arm bolts and didn't hurt the mounts.. I put a bolt kit in one of mine and bent my frame when I hit a stump I didn't get my son to stop in time and he hit it and bent the a-arm and broke a lower bolt .. the new a-arm went right on his machine and mine with stronger bolts bent the mount and pushed in the frame at the mount location. So I put the stock bolts back in..
This is a hot topic right now in the UTV world and I think Polaris needs to address this as soon as possible